Expert Answers about Acura TSX

• Curt Trailer Hitch C11085 Installation Difficulty on 2013 Acura TSX Sportswagon
• Curt rates this hitch install as a 6-out-of-10 in difficulty level. For an experienced installer they indicate 45-minutes install time. For first-time hitch installers, plan on twice that to be safe. The linked instructions detail the process and also list the tools required, which also include a torque wrench like # PTW3001C. All hardware is included. I linked a helpful article with tips for an easier hitch installation and a video for a 2011 Accord. The Class I trailer hitch from Curt...
  view full answer...


• Storing the Saris Bones Hitch Rack in Garage
• The arms of the Saris Bones Hitch 2 Bike Rack # SA882 fold down to make it a bit easier to store. Looking at your picture it would probably be best to put the rack in the right corner of the garage floor with the shank pointed at the rear of the garage. We don't really have a great way to hang the rack on your wall so it might just be easiest to have it in the corner on the ground leaning on the right wall with the arms folded down.
  view full answer...


• Will Installing Hitch on 2009 Acura TSX Prevent Car From Being Jacked Up
• The Curt I hitch, part # C11496 would be an excellent choice for your 2009 Acura TSX. The tow hook would be used to winch the vehicle up onto a flatbed tow truck, but it isn't used as a jacking point according to the owner's manual. The jacking points for your TSX are on the frame rail directly behind the front wheels and right in front of the back wheels. I found this on page 461 of the online copy of the owner's manual in the 'changing a flat tire' section. Because of this, you wouldn't...
  view full answer...


• Installing the Curt Trailer Hitch 11455 on a 2004 Acura TSX
• There are a few steps to note when installing the Curt Trailer Hitch, # 11455, on your 2004 Acura TSX. You will not need to modify the exhaust at all, but you will need to lower the exhaust during installation and remove the exhaust heat shields from both sides. You may also need to drill or file the access holes on the vehicle frame so the carriage bolts will fit. The carriage bolts will need to be fished through the frame using a fishwire tool. Once you have the hitch installed, you...
  view full answer...


• How To Install The ZCI Circuit Protected with 4 Pole Harness On A 2004 Acura TSX
• I recommend using the ZCI Circuit Protected Vehicle Wiring Harness with Installation Kit # 119250KIT as this will include everything needed to install the kit on your vehicle. We haven't had a chance to make an installation video of this wiring harness on your 2004 Acura TSX yet, but you will first want to start by removing any trim and carpet pieces in the rear of the trunk. You can then remove the taillight access panel which will expose the taillights wiring harness. Once the harness...
  view full answer...