I do have an option for you but the No-Drill Mount for Electrical Mounting Bracket part # 18140 doesn't really work well for 7-ways as there is not enough extension to clear the wiring loom. Instead, you'd want to use the No-Drill Mount Bracket part # 18136 which offers a greater extension and works great with the 4 to 7-Way with 4-Way Adapter part # ETBC7. view full answer...
The Thule Motion XT Rooftop Cargo Box - 16 cu Feet # TH629706 will allow you to fully open your rear hatch on your 2021 Toyota Sienna. As far as the compatibility with your factory crossbars, the Motion XT will fit your crossbars as long as they are 3-1/2 inches wide or less and 1-11/16 inches tall or less. In order to ensure the fitment on your crossbars, I recommend measuring these dimensions of the crossbars on your vehicle. view full answer...
Yes, you can use a roof rack like the Thule WingBar Edge Crossbars # TH89FE, with the Edge Raised Rail Feet for Thule Edge Crossbars # TH69SC which is a confirmed fit for your 2005 Toyota Sienna, with a rooftop tent like the:
-Yakima SkyRise HD Tent for Roof Rack Crossbars # Y07437.
However, the main thing to note is that you are only capable up to your lowest rated component. For instance, if your roof rack is rated for 165-lbs, and your vehicle's roof has a maximum carrying capacity... view full answer...
I would be happy to help you set up your 2015 Sienna to tow a 2004 Starcraft Travel Star trailer. You're going to need a hitch, a pair of wiring harnesses, ball mount kit, brake controller, and a mounting bracket. I have listed the parts you will need below along with any installation videos we may have:
Trailer Hitch - etrailer Class III Trailer Hitch item # e98853
Wiring Harnesses - 4-Way - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Connector item # C56261 or item # C56106... view full answer...
There is an option for you, though the part you asked about is not for use with trailers. Instead, I recommend the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210.
This will give you a ball mount for use when towing your trailer, and a receiver above it which you can use for your bike rack. You can secure it to your Sienna's hitch with the etrailer Trailer Hitch Receiver Lock # e98880 or Pin and Clip # PC3.
For a hitch ball, depending on the size... view full answer...
In order to add a 7-way to your 2018 Toyota Sienna so you can tow with a hitch like the etrailer Trailer Hitch Receiver # e98837 you will need to add a 4-way (if you don't have one) and then a 7-way, which the 4-way will connect to. For your '18 Sienna the correct parts are:
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118648
- Universal Installation Kit for Trailer Brake Controller # ETBC7
The # ETBC7 will give you the 7-way as well as the rest of the hardware... view full answer...
To find the correct ball mount for your 2008 Toyota Sienna and 2003 Coleman Santa Fe tent trailer, there are a couple of measurements you will need to take.
First, Measure the hitch height from the ground to the top of the receiver opening on the trailer hitch. Make sure your van is parked on level ground.
Next, measure the trailer coupler height from the ground to the bottom of the trailers coupler. Again, the measurement is most accurate when on level ground. The trailer will also need... view full answer...
We do offer a hitch that will fit a 1998 Toyota Sienna, but the Draw-Tite Hitch, # 75038, that you referenced will not fit this vehicle. This hitch is designed to fit the frames of domestic model Ford and Dodge trucks.
I you are needing a hitch for minor towing and for standard hitch accessories like a bike rack, the Draw-Tite Max-Frame # 75120 is a confirmed fit for the 1998 Toyota Sienna. This hitch will has a 2 inch receiver opening and is rated Class III.
Before you can haul you motorcycle... view full answer...
Yes, the Rhino-Rack J-style kayak carrier # S510 will fit the factory crossbars on your 2004 Toyota Sienna. I have included a link to a video review of this carrier for you. view full answer...
You are correct that it can be tricky fitting a bike rack meant for a 2" receiver to a 2-1/2" receiver, especially when it uses an integrated anti-rattle system. One other thing to note is that every bike rack company I've spoken with about using an adapter says that you can't use anything they haven't made otherwise it voids the warranty of the rack. The good news is that I have the perfect solution for you!
We have the Hollywood Racks Hitch Receiver Reducer Sleeve - 2-1/2" to 2" # HRHA-2... view full answer...
We can definitely get your 2023 Toyota Sienna set up with the Echo brake controller to go along with the Curt Hitch # C22UR. All you'll need is a 4-way (if your Sienna does not already have one with the factory tow package) and 7-way to get the Echo working, with the correct part numbers being the following:
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK69FR
- 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L
- Curt Echo Wireless Trailer... view full answer...
The correct Curt 4-pole trailer wiring harness for your 2015 Toyota Sienna is their part # C56106 if you have the SE model or part # C56261 if your Sienna is NOT the SE model. Both are powered converters that provide isolation and protection for your new car's wiring by drawing the actual power for the trailer lights directly from the car's battery. The car's internal wiring just acts like a switch to trigger the harness to draw that power from the battery.
This is important protection... view full answer...
The Dexter 3,000 lb trailer axles use a different size of brake assemblies so what you'd need is the Dexter 3k axle brake assemblies part # K23-472-473-00. 3,500 lb trailer axles use a slightly different size assembly so they would not fit. Then for hub/drums you'd want the part # AKHD-545-35-EZ-K and you'd be set. view full answer...
We can get your 2020 Toyota Sienna with raised side rails set up with a Rhino-Rack Pioneer Platform rack, and you don't need to get any rails or legs separately. The Pioneer Platform that fits your '20 Sienna actually comes with the leg kit that will attach to your Sienna's side rails, so no additional parts are needed. The Pioneer Platform that fits your 2020 Toyota Sienna is the following:
- Rhino-Rack Pioneer Platform Rack # RR77AB
Since you mentioned tying your gear down I do recommend... view full answer...
The Thule Pulse Alpine # TH613 is about 25-1/2 inches wide but when you open the lid it's not much wider. I reached out to Thule and they said that there is no change in width when the lid is open. The lid does not open a full 90 degrees so this helps the width stay to a minimum so you can put other accessories on top like a rooftop bike rack # RBC036. view full answer...
Actually, the Thule Camber # TH9056 bike rack you'd looked at would work well for carrying the bikes you mentioned.
For the man's bike and the boy's bike you won't need a frame adapter bar like # TH982XT as long as you have at least 13 inches of space on the top bike frame tube (between the handlebar gooseneck and the seat post). If the women's bike has a deep step through frame, you'll definitely need an adapter bar, but even if you have an angled top tube it'll probably be a good idea... view full answer...
If your 2021 Toyota Sienna has factory crossbars that are no wider than 3-3/4" and not taller than 7/8" then yes, the Rhino Rack # RR576 will fit; these carriers are designed to fit on most aftermarket and factory crossbars, so this shouldn't be an issue. view full answer...
In order to determine if the Rampage Minivan Center Console part # RA39923 will fit your 2017 Toyota Sienna you will need to have a 29" long x 9" wide space in between either the front two or rear two seats. Unfortunately, neither we nor the manufacturer test fits this console on particular vehicles which is why you need to measure first. I wish I had a better answer for you. view full answer...
Though hitches do sometimes have an upward cant to them, the receiver on the Draw-Tite # 76112 will sit mostly level once installed on your 2016 Toyota Sienna. The pictures we have of it not installed do make it look like it will have a severe angle, but this is due to how the brackets will attach to the underside of the vehicle. I included a video of an install we did with the # 76112 on a 2016 Sienna that will show this in greater detail. If you jump to the 2 minute 14 second mark, you... view full answer...
Yes, I contacted our representative at Timbren and she informed me that the product that you selected, the Timbren Rear Suspension Enhancement System, part # TTORSEN04, will fit your 2008 Toyota Sienna LE AWD. view full answer...
Go To Results