The end of hitch reducer sleeve # HT02 that fits into the 2 inch receiver is hollow and the Softride anti-rattle device and lock # SR25219, will fit. I have included a link to a video review of the lock for you. view full answer...
The Draw-Tite # 76020 does have a tech tip of needing to modify the heat shield as it does fit a few years of the Mazda CX-9. Some of the 2018 models did need this shield modified slightly to fit properly, but it looks like that may have been limited to that year. I have an install video we did on a 2020 CX-9 and there was no modification needed. As we have not had a 2021 to do an install on as of yet, I can't 100% confirm the need to modify the heat shield, but odds are you will not need... view full answer...
The Swagman G10 2-Bike Platform Rack (now discontinued) weighs about 47 lbs and can handle 45 lbs per bike. The Swagman Chinook 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting part # S64683 weighs 47 lbs as well.
If you are looking for a nice lightweight platform rack, I recommend the Kuat Sherpa 2.0 2-Bike Platform Rack - 2" Hitches - Tilting - Black part # SH22B which is 32 lbs and is constructed of aluminum for corrosion resistance. It also tilts away from the vehicle... view full answer...
I have a solution for you, but there is not a Class II hitch with a 2" receiver available for the 2020 Mazda CX-9. Instead, you can use a Class III hitch like the Draw-Tite # 76020 which has a 2" hitch receiver like you're seeking and also has a hidden cross-tube like the EcoHitch so it's going to keep the clean factory look on your CX-9.
If you're going to be towing with your CX-9, you'll also need a wiring harness, ball mount and hitch ball. For the wiring harness I recommend using the... view full answer...
The Rightline Sport 3 XL Rooftop carrier # RL100S30 will accommodate your 2012 Mazda CX-9 very nicely.
A good option to consider is the Non-skid Roof Protection Pad # RL100650 which will protect your roof from scratches and dings inflicted by sharp objects in your carrier. Plus will keep bag from sliding around on your roof as you brake and accelerate.
You can use extra straps if you would like for extra reinforcement for the cargo bag.
I have included video and instruction links... view full answer...
I checked with our bike rack manufacturers, and there is a 3-bike trunk-mounted bike racks that fits your 2016 Mazda CX-9, though the Thule Passage # TH911XT is not a fit. Instead, you will need a rack from Yakima:
- Yakima FullBack 3-Bike Rack # Y02633
Apart from fit, there are a number of reasons to go with the FullBack, starting with its strong anti-sway cradles and ratcheting straps which secure your bikes at three different points. This is important because it ensures your bikes... view full answer...
If your 2013 Mazda CX-9 has a trailer hitch with a 2 inch x 2 inch receiver, like the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75531, the MaxxTow Ball Mount with 2 Inch Accessory Receiver # MT70066 will likely work well for you. Both Class II and Class III trailer hitches are offered for your CX-9, and Class II trailer hitches have 1-1/4 inch receivers.
Besides making sure you have a 2 inch hitch receiver, you will want to measure the clearance needed at your bumper to... view full answer...
The CIPA EVO Formance Alfas Maximum part # CM93447 which is a 9005 bulb are for the high beams of your 2007 Mazda CX-9 and then for a similar low beam you'd need the # CM93389 which is an H11 bulb instead. view full answer...
I spoke with my contact at Hidden Hitch, and he said that the factory OEM hitch has to be removed for the Draw-Tite, part # 75531, to be installed on your 2011 Mazda CX-9 Grand Touring.
He did not think that the factory hitch is welded on, but he was not sure. I would recommend to look under the rear of your vehicle to see if the hitch is bolted on or welded on. I am including links to the installation instructions on the Hidden Hitch and a video of the hitch being installed on a 2010... view full answer...
The Draw-Tite Class III hitch for a 2018 Mazda CX-9 is part # 76020.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118278 a ballmount like # 2753 and a trailer ball like # 19260 for a 1-7/8 or # 63845 for a 2 inch.
I've linked to install videos for the hitch and the trailer wiring. view full answer...
I checked with Draw-Tite and confirmed the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76020 is a fit for a 2023 Mazda CX-9. It features a simple bolt-on install without any drilling required. It has a class III rating with 2" receiver which is great for towing or hitch mounted accessories like bike racks and cargo carriers. view full answer...
I spoke with my contact at Rhino-Rack who said that they don't have any notes about there being any issues between the part # RRRVP51 and the moon roof on a 2019 Mazda CX-9 but she did say that you need to be careful not to overtighten the hardware.
Since they couldn't give me an exact measurement for the roof rack so that you can compare I went out to the warehouse and found the feet of this system to measure about 1-1/2" high. The fit kit will add about 1" more of height. I recommend... view full answer...
To use the Curt Echo Wireless Trailer Brake Controller # C51180 your vehicle only needs 12 volt, ground, and turn signals connected to its 7-way socket. What this means is you do not need the brake signal from the 7-way.
For example, if you used a 4-to-7 way adapter such as # 30717, there will not be an output wire from the Echo to connect to, so you could simply tie that wire off, as you can see by the accompanying diagram.
Apart from that the only other thing required is that your... view full answer...
With the class III receiver like the Curt # C13284 on your 2021 Mazda CX-9 I recommend the Flint Hill Goods 29" x 49" Carrier # FHG69ZR. You will need to ensure the weight of the carrier(77lbs) and your chair do not exceed the capacity of your CX-9 or your receiver. If you can tell me exactly what receiver you have I can verify the weight capacity for it.
The Flint Hill Goods 29" x 49" Carrier # FHG69ZR is capable of supporting up to 500lbs. Its aluminum construction makes it light weight... view full answer...
We do have pictures of a class III hitch installed on a 2021 Mazda CX-9 and I have attached a couple of them. I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver item # 76020 you were looking at. It is the most concealed hitch option we have for your Mazda.
The Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Matte Black item # BA22B would be a great bike rack to go with this hitch. It can carry two bikes at up to 60 lbs apiece. I have also attached... view full answer...
On the Thule AeroBlade roof rack for the factory side rails on your 2012 Mazda CX-9, the center to center spread recommended by Thule is 28 inches between the bars. But you might be able to move them some to accommodate some baskets that normally would not fit a 28 inch bar spread.
The baskets that should fit are:
Thule Canyon XT, # TH859XT
Thule Trail, # TH864XT
Rhino-Rack, # RMCB02, # RMCB
Yakima LoadWarrior, # Y07070 view full answer...
I do have an option for you but the T-One Vehicle Wiring Harness for Factory Tow Package part # 118278 is not a confirmed fit for your 2014 Mazda CX-9. Instead, you will want to use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118520 which fits models both with and without the factory tow package. The wiring harness that you originally asked about is only a confirmed fit for a Mazda CX-9 from 2016-2018 and will not work on your 2014.
I have also attached an... view full answer...
Yes, I checked with Yakima and the Yakima SkyBox NX 16 Roof Cargo Box part # Y95AV is a confirmed fit for your 2017 Mazda CX-9. In regard to hatch clearance, you will need to measure from the center of the front crossbar to the closest part of the hatch while open. The Yakima SkyBox NX 16 will require at least 47". I have attached a photo showing you how to measure this but the new SkyBox NX 16 is not listed on it, remember this one is 47 inches needed. I have attached a video of this... view full answer...
The Thule Force XT Rooftop Cargo Box # TH6358B does fit your 2017 Mazda CX-9 with a factory roof rack and would fit above the shark fin antenna. I found videos and picutures online that I can't share here due to copyrights that showed this box fitting above the antenna. view full answer...
For your Starcraft 2401L popup the SportRack Pop Up Roof Rack # SR1020 would be a really great option that would fit well and would allow you to carry canoes, paddleboards, and bikes like you mentioned. The length of the bars are adjustable at lengths of 80 inches, 83 inches, and 86 inches.
Then for a canoe and paddleboard carrier the LockRack part # LR54FR would work great and for a bike rack # RKY1222 would work great. view full answer...
Go To Results