I checked the owner's manual of your 2015 Land Rover Range Rover. With your 275/40R22 tires, the only snow tire chains that are compatible with tires of your size are one sided snow tire chains. The tire chains that fit your tires are the Konig Premium Self-Tensioning Snow Tire Chains - Diamond Pattern - D Link - K-Summit XXL - Size K77, part # TH02230K77.
I have included a video review link below. view full answer...
The Yakima Light Mounting Brackets, # Y07075, will fit on 1 inch diameter tubing. The Curt cargo basket # C18115 does use 1 inch tubing. Even though these products have not been tested together, I am confident they are compatible. I have included a link to the installation details of the Curt basket for you. view full answer...
There is a hidden hitch for your 2022 Land Rover Range Rover, from Stealth Hitches. These are great because not only is the crosstube hidden, but you can completely remove the receiver or ball mount when you aren't using it so your Land Rover doesn't look like it has a hitch at all. The correct one will depend on if you are using it for an accessory like a bike rack only, or if you are also going to be using it for towing.
- Accessory/Bike Rack Only: Stealth Hitches Hidden Rack Receiver... view full answer...
It's not likely since the Yakima Tracks # Y01135 are a universal fit usually used on campers but you can measure to find out. The 60 inch tracks have 11 mounting holes each spaced 6 inches apart. If the holes don't line up you can drill new holes into your roof but I wouldn't suggest it.
Instead I would go with a roof rack designed to fit your 2006 Land Rover Range Rover Sport. The best rack we have that will fit is the Thule WingBar rack:
60 inch WingBars # TH711520 (black) or # TH711500... view full answer...
The Curt Weld-On 2" Receiver # E17 will allow you to have a custom receiver made for your 2012 Land Rover Range Rover HSE. This is needed as I do not see that any aftermarket manufactures are producing a receiver that is confirmed to fit your vehicle.
The ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT will allow you to wire in a 4-way connector without splicing into your factory wiring. This will allow you to tow most small trailers as well as add Auxiliary Lights # C53201.... view full answer...
Yes, the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH46GR is confirmed to fit your full size 2019 Land Rover Range Rover with the V8 engine. The removable receiver and ball mount allow you to maintain your factory appearance. I do recommend getting a Carrying Case # 391CASEC to store the ball mount, receiver and the 7-way to 4-flat adapter. view full answer...
I have the perfect bike rack for you. The RockyMounts BackStage Platform Rack part # RKY10002 can carry 2 bikes, secures the bikes by the wheels therefore will not damage your carbon fiber frame, and has the swing away feature that will allow access to your rear cargo area without removing the bikes from the rack. This is the only platform style bike rack we offer that meets all three of your criteria. Another great thing about this rack is that it has locks for both the bikes and the rack.
I... view full answer...
According to the owner's manual for your 2007 Land Rover Range Rover tire chains can only be used on 18" and 19" wheels. In addition to wheel size, tire chains are only permitted for use on the rear two wheels.
As long as you have the standard 255/50-20 tires on your Range Rover then the Titan Chain Alloy Snow Tire Chains part # TC2324 will fit but I cannot recommend you use them as your owners manual states not to. However, should you find a set of 19" wheels with the 255/55-19 tires... view full answer...
I have a solution for you. Unfortunately, the Rhino-Rack Roof Rack for Fixed Mounting Points # RRRVP05 will not fit your 2008 Land Rover Range Rover HSE because it interferes with the vehicle's antenna. For a great alternative, I recommend the following parts:
- Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 3 # RRVA137B-3
- RCH Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 6 # RRRCH6
- Custom RCP Fit Kit for 6 Rhino-Rack RC and... view full answer...
I can tell you exactly how to find the correct ball mount for your 2014 Range Rover. What you'll want to do is make sure your Land Rover and trailer are each parked on level ground. Then measure from the ground to the top of the hitch receiver. Also measure from the ground to the bottom of your trailer's coupler.
If the hitch height is greater, you need a ball mount with drop. If the coupler height is greater, you'll need a ball mount with rise. You will also also want a draw bar with... view full answer...
In a lot of cases there are ways to directly fit a Pioneer Platform like the # RR89QX to a set of Rhino Rack RCL Legs # RRRCL6, but there is not a fit kit that will allow you to attach the RCL legs to your 2006 Range Rover HSE. The 2006 Land Rover Range Rover HSE only has fit kits for the RCH legs and this is what is keeping you from connecting directly to the roof in the manner that you're seeking.
With that said, you can install a roof rack using parts # RRVA137B-3, # RRRCH6 and # RRRCP05-BK... view full answer...
K-Summit tire chains # TH02230K77 do fit tire size 275/45-21. But you will want to check your vehicle owner's manual because you can't always use tire chains with snow tires. The manufacturer of the tires may also have restrictions. view full answer...
The Thule Vector Alpine Rooftop Cargo Box part # TH613501 will fit a 2016 Land Rover Range Rover HSE and you will have no problems opening the rear hatch with either cargo box installed. And in regards to a glass roof (panoramic/sun or moon) there will not be any direct interference or compatibility issues.
However, it is a standard rule with all roof rack accessory manufacturers to not open the roof with any sort of roof mounted accessory installed due to the chance of interference as... view full answer...
You said you have the Thule AeroBlade roof rack on the top of your 2010 Range Rover. Thule AeroBlade crossbars measure 3-1/8 X 1-1/8 inches. The # RMCB can fit crossbars up to 3-1/2 inches wide x 1-1/2 inches tall, so you should have no problem with the cargo basket fitting as long as the distance center-to-center of the crossbars is between 21 and 30 inches. This basket weighs 31 lbs and the inside dimensions are 41 X 30-1/2 X 7-13/16 inches.
I also recommend a stretchable cargo net like... view full answer...
The ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is a universal fit that will absolutely work on your 2008 Range Rover and won't have any affect on your other wiring or interfere with it.
This kit simply clamps onto the tail light harnesses in your vehicle and you will also need to run a hot lead to your battery to power the unit. I have added a link to a video install for you as an example so you can get an idea of the... view full answer...
Your 2007 Land Rover Range Rover does not have a direct plug and play wiring harness but there is a solution. I suggest the Wiring Harness # C59496. This harness has an upgraded circuit protected powered taillight converter to protect your Rover from electrical shorts. The kit includes all of the wiring, the converter box, quick splice connectors, and a circuit tester. Everything you need for installation. view full answer...
The trailer hitch that fits your Supercharged 2015 Land Rover Range Rover comes from Stealth Hitches and is available in 2 different variations:
- With Accessory Receiver Only # SH49GR
- With Accessory Receiver and Towing Kit # SH46GR
I really like this system because it gives you a complete factory look when you remove the receiver/ball mount when you aren't utilizing the hitch. We had the opportunity to install the option that includes the towing kit on a 2019 Supercharged Range Rover... view full answer...
If your 2010 Land Rover Range Rover has the factory tow package then I recommend using the Tekonsha Prodigy P3 # 90195. This is one of the most reliable brake controllers that we have which is reflected in the massive amount of positive reviews left by customers.
The P3 is a proportional brake controller that will apply the brakes on your trailer at the same time and with the same intensity as the brakes in your vehicle. The best feature about this brake controller is the LCD screen that... view full answer...
As there is not a custom fit harness for your 2006 Land Rover Range Rover you will need a hardwire kit like the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. The kit includes a powered converter that will protect the factory wiring from excessive draw.
A Mounting Bracket # 18144 will allow you to secure the 4-way on the Range Rover and protect it from dragging. view full answer...
Go To Results