How to Find the Correct Ball Mount for 2014 Land Rover
Question:
Hi, I am looking for a trailer hitch ball mount and 2 inch ball for a 2014 Land Rover Range Rover HSE LUX. Could you point me to the right one? the manual says max distance from the securing pin to the center of ball should be 11. Max height 3.
asked by: Brian D
Expert Reply:
I can tell you exactly how to find the correct ball mount for your 2014 Range Rover. What you'll want to do is make sure your Land Rover and trailer are each parked on level ground. Then measure from the ground to the top of the hitch receiver. Also measure from the ground to the bottom of your trailer's coupler.
If the hitch height is greater, you need a ball mount with drop. If the coupler height is greater, you'll need a ball mount with rise. You will also also want a draw bar with the right capacity, and a hitch ball that will fit.
For example, if your hitch was 6 inches higher than your coupler, Curt Ball Mount # C45336 has a 10,000 lb capacity, offers 6-1/8" of drop, is 9-3/8" from hitch pin hole to center of ball hole, and would require a 2" hitch ball that fits a 1-1/4" hitch ball diameter such as # A-90.
If your coupler happened to be 3" higher, you could use the Draw-Tite # 2753, which has a 7,500 lb capacity, offers 2-3/4" of rise, is 9" long and requires a hitch ball that fits a 1" diameter such as # 63845. For either of these ball mounts, pin and clip # PC3 would work great.
I've attached links to video reviews of these products for you to take a look at and would be happy to help find you the exact draw bar you need once you do take the measurements.
Products Referenced in This Question
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 5" Rise, 6-1/8" Drop - 9-3/8" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: How Tall is 2 Inch Diameter Hitch Ball Part # 19247
- Q&A: How to Increase Height of Hitch Ball by 2-Inches
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Q&A: Curt Hitch Receiver for Cargo Carrier on a 2022 Chevrolet Equinox
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch Ball Wrench Size and Torque Rating for 1-1/4 Inch Hitch Ball Shank Size
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: How to Properly Set Gain/Sensitivity of The Curt Echo Wireless Brake Controller # C51180
- Q&A: What Roof Rack Kits Will Work with the RetraxPRO XR Hard Tonneau Covers
- Article: Steel vs. Aluminum Ball Mounts