A trailer weight distribution/sway control (WD/SC) system is appropriate under a number of conditions, such as when the trailer weighs more than half the weight of the towing vehicle, when the vehicle headlights point upward when it is hitched, if steering and braking performance suffer or if there is rear-end sag in the vehicle. The linked article and video on WD/SC go into detail about these conditions.
Vehicles that have an automatic leveling system can still use WD/SC. The procedure... view full answer...
According to Draw-Tite, their # 75229 Class III hitch is a fit for all models of the 2020 Land Rover Range Rover Sport, including the Hybrid. If you'll be using the hitch for towing, you'll need a few other items to complete your towing system.
For a trailer wiring harness, use part # 118275 if the vehicle is equipped with the factory tow package or # C59236 without the factory tow package. For a ball mount, use # D-28 with the # PC3 hitch pin and either the # 19260 for a 1-7/8 or # 63845... view full answer...
I contacted our representative at Roadmaster and he informed me that the Roadmaster XL Base Plate Kit, part # 1910-1 will work with your dealer installed brush guard.
To complete your flat-towing setup, you will need a tow bar, safety cables, wiring or lighting, and a supplemental brake system.
The Roadmaster Falcon All Terrain Tow Bar, part # RM-522, would be a good option for a tow bar as it is a non-binding tow bar. The non-binding feature makes for easier hookup and disconnecting... view full answer...
There is a trailer hitch that fits your 2000 Land Rover Discovery II, but not the one you referred to. Instead you will need the Curt # 13455 which is a 2" hitch that is a bolt-on installation so no drilling into your Discovery's frame will be necessary.
For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 119178KIT. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing... view full answer...
The WeatherTech Floor Mat # WT444041 is sold as a pair including both the drivers and passengers side mats. My technical contact at WeatherTech confirmed that this mat will fit all three Land Rover Evoque trims, Dynamic, Pure and Prestige. view full answer...
The Curt # C13396 trailer hitch will fit a 2018 Land Rover Discovery Sport HSE ONLY if it is a 5-passenger model. If your Land Rover has 7-passenger seating (also called 5+2 seating) then there is not currently a hitch that will fit your vehicle. view full answer...
The Curt hitches like part # C13243 for the 2020 Land Rover Range Rover Sport require the stabilization strap part # 18050 with accessories because the Land Rovers are not designed to handle a lot of tongue weight and accessories like bike racks are considered all tongue weight which puts a lot of leverage on the setup.
Both the Draw-Tite Hitch part # 75229 and the Curt hitch will be recessed under the bumper because they install exactly the same. I have attached a video snip showing... view full answer...
Thanks for the photo, and I took a look at your previous order and checked with Rhino-Rack, and the correct replacement Rhino-Rack feet for your 2018 Land Rover Discovery are the ones you mentioned, the Rhino-Rack SRB Legs for Vortex Aero Crossbars # RRSX026. view full answer...
Yes, we currently have the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 you could use and we also carry all the accessories you'll need to tow a trailer. The first thing you'll need to tow a small cargo trailer with your 2013 Land Rover Evoque is a trailer hitch receiver. If you do not have one then I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13128. Curt manufactures their hitches in the US and are known for their quality and long lasting powder... view full answer...
Yes, it does! I verified with Stealth Hitches that their Hidden Trailer Hitch Receiver w/ Towing Kit item # SH97GR is confirmed to fit your 2020 Land Rover Discovery Luxury HSE. This hitch will not fit the Sport models and if you have a full size spare tire you won't be able to reinstall it but the hitch will fit. view full answer...
I checked with Thule and the OutWay 3 bike rack, # TH56BV, will fit your 2008 Land Rover LR2.
If you will be carrying women's, children's, or alternative frame bike racks, I recommend using the bike adapter bar, # TH982XT, for greater ground clearance and to carry the bikes more level. I have included a link to a video that shows how the adapter works. view full answer...
The Curt Trailer Hitch Receiver item # C13243 you referenced is confirmed to fit your 2020 Land Rover Range Rover Sport . This hitch is custom fit and bolts to your Range Rover with included hardware.
If your Range Rover doesn't have the tow package and you are in need of a wiring harness to control your trailer or accessories lighting functions I recommend the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT.... view full answer...
The Yakima SkyBox 21 Black Carbonite Rooftop Cargo Box # Y07337 does indeed mount on aero-style roof rack crossbars like the ultra-quiet Thule WingBar Evo bars # TH711520. It will in fact fit any crossbar that does not exceed the dimensions 3-1/2 x 1-11/16-inches and that are spaced apart (bar center to bar center) between 24- and 42-inches.
This black bar set, along with the Evo Clamp Feet # TH710501 and the vehicle-specific Fit Kit # TH145116 make up the Thule WingBar Evo rack system... view full answer...
Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have. view full answer...
I checked with Curt and they do not list any exclusions for the diesel versions of the 2016 Land Rover Range Rover Sport with a diesel engine for their hitch part # C13243 so it would fit and work well.
There is no drilling or fascia modifying to install this hitch either. You will need to remove a panel but it can easily be reinstalled once you remove the hitch. view full answer...
Since the factory hitch for the Evoque is a 1-1/4 inch Class I or II the trailer hitch receiver lock # e98879 will fit. Hitches that are 1-1/4 inches have a 1/2 inch diameter pin hole which is what this pin fits.
The inside span is 1-5/8 inches long and the overall length is 5 inches. With these measurements you can check the space available around the outside of the receiver to ensure fit. view full answer...
I checked the owner's manual of your 2015 Land Rover Range Rover. With your 275/40R22 tires, the only snow tire chains that are compatible with tires of your size are one sided snow tire chains. The tire chains that fit your tires are the Konig Premium Self-Tensioning Snow Tire Chains - Diamond Pattern - D Link - K-Summit XXL - Size K77, part # TH02230K77.
I have included a video review link below. view full answer...
Yes, the 7-way to 5-way and 4-way Adapter, # C35FR, will work with your 2005 Land Rover LR3 as long as your factory 7-way trailer connector. This adapter was originally designed for certain European vehicles with incandescent tail lights and factory trailer wiring that have bulb out sensors to let you know if one of your tail light bulbs are burned out.
On some European vehicles, the bulb out sensor runs through the factory trailer wiring as well. Since LEDs on trailers use only a fraction... view full answer...
We do have a few hitches that fit your 2023 Land Rover Velar!
For just a bike rack you need the Stealth Hitches Hidden Rack Receiver # SH69GR, but since you plan on towing further on down the road I recommend picking up the Hitch and Towing Kit # SH66GR instead.
The difference between these kits is the receiver kit is designed only for use with accessories like a bike rack or cargo carrier, while the hitch and towing kit comes with a ball mount and the wiring needed to tow a trailer.... view full answer...
You will have absolutely no issues fitting the Yakima SkyBox NX 16 Roof Cargo Box # Y95AV to the factory roof rack on your 2020 Land Rover Discovery. Not only will it fit the crossbars, but you will also have enough clearance to open up your rear hatch, and the box won't make contact with the antenna on your roof. view full answer...
Go To Results