Trailer Hitch Fit for 2020 Land Rover Range Rover Sport Hybrid
Question:
Hi. I would like to make sure this hitch will fit for my p400e hybrid 2020. thank you .
asked by: Hugo M
Expert Reply:
According to Draw-Tite, their # 75229 Class III hitch is a fit for all models of the 2020 Land Rover Range Rover Sport, including the Hybrid. If you'll be using the hitch for towing, you'll need a few other items to complete your towing system.
For a trailer wiring harness, use part # 118275 if the vehicle is equipped with the factory tow package or # C59236 without the factory tow package. For a ball mount, use # D-28 with the # PC3 hitch pin and either the # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball.
I've linked to an install video for the hitch you'd looked at.
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 800 lbs TW
- 8000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Options For A Swing Away Hitch Mounted Spare Tire Carrier
- Q&A: Trailer Hitch Recommendation for 2018 Land Rover Discovery Sport
- Q&A: Dexter D120 Axle Replacement Parts
- Q&A: How to Mount 7-Way Connector on a 2015 Land Rover Range Rover Sport with 2" Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Bushing and Washer for Ram 8,000 lb Jack
- Q&A: Spring Hanger and Axle Diameter Measurements for Installing Leaf Springs on Single Axle Trailer
- Article: Trailer Maintenance Schedule
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Trailer Hitch For A Mercedes-Benz GLS 450
- Article: My Trailer Hitch Doesn't Fit
- Article: Calculating Portable Generator Power Needs
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: 5 Things to Know About Weight Distribution Hitches