The start capacitor # ACMSCKIT included with the Advent Air # ACM135C will drop the starting wattage down to approximately 1,800 watts with a 1,450 running wattage so your Champion generator # CH34FR with 2,500w surge rating and 1,850w running wattage will be enough to handle the demand.
If you plan on powering more items in your trailer then you can use the Parallel Kit # CH74FR and another # CH34FR to double your available wattage. view full answer...
The length I'm seeing for a 2018 Lance 650 truck bed camper is 15'6" so the Camco UltraGuard Slide-In Camper Cover - 16-1/2' Long # CAM45771 would be closest fit at 16-1/2'. The extra foot of material should make getting the cover in place easier and the excess can be tucked and strapped down with the integrated straps. view full answer...
You'd want to go with a cover that is slightly longer than what your camper is so since yours is 15-1/2 feet in length the Camco UltraGuard part # CAM45771 would be what you'd need as it fits up to 16-1/2 feet in length. view full answer...
Like you mentioned, we do not have crossbars anywhere near the 95 inches you need, so unistrut seems fine. You can use something like the Yakima SkyBox 18 Rooftop Cargo Box # Y07336 and it will clamp on just fine so long as the unistrut is no more than 3-1/2" wide x 1-11/16" tall. view full answer...
For your 2001 Ford Pleasure Way Excel TB on a Ford E-350 Chassis you'll need the Roadmaster Rear Anti-Sway Bar # 1139-178. For the front you would need the Roadmaster Front Anti-Sway Bar # RM-1139-115. view full answer...
The correct sized cover for your 16'8" Lance 855 truck bed camper is the Camco UltraGuard Slide-In Camper Cover # CAM45770 which is designed to fit truck bed campers up to 18'2" long.
This has self-adjusting hold-down straps so you can fit it better to the body of your camper and not have as much slack. view full answer...
Based on the pictures you provided it looks like you have an older Ventline manual vent with a fan so the Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan # V3094-601-00 you were looking at would just be the newest version and would make a great replacement if you're happy with a manual vent over a powered one.
To replace your current vent you'll need to scrape off the old sealant first. I recommend using a composite tool like # PT73HJ and really taking your time so that you don't... view full answer...