Expert Answers about International Trucks
- Will Draw-Tite Trailer Hitch Receiver 76227 Fit A 2018 Subaru Outback Wagon Touring?
- The Draw-Tite Trailer Hitch Receiver # 76227 you were looking at is confirmed to fit your 2018 Subaru Outback Wagon Touring with the 2.5L engine. You do not have a sport model as they were discontinued in 2011, and since this hitch fits the 2010-2019 Outbacks they had to mention that it will not fit the sport models.
This hitch is a great option as the hidden crosstube makes it where only the receiver itself is visible, and its 600lb tongue weight rating and 4000lb trailer weight rating...
view full answer... - What Is Required To Install Draw-Tite Trailer Hitch Receiver 76021 On 2016 Jeep Renegade Trailhawk
- I would be happy to help!
If your 2016 Jeep Renegade Trailhawk does not have the factory tow hooks then you will still need to drill a 1" diameter hole to install the Draw-Tite Trailer Hitch Receiver # 76021. The vehicles with the factory tow hooks are the only ones that do not require drilling.
In addition you will still need to slightly trim the heat shield near where the hitch gets installed, and bend or remove a small section of the muffler bracket. This is required for all of the...
view full answer... - Available Lippert Axle Riser Kit for 2010 R-Pod 171
- The # LC270682 does have 9" center on center hole spacing, and there's a good chance this is the correct part, but knowing what axle you've got would be optimal. We've seen a number of different Dexter and Lippert torsion axles on these R-Pod trailers depending on the configuration, so there's not a hard and fast rule for this.
If you can provide us with a photo of the sticker on the center of your axle, that would give us the information we need to confirm this Axle Riser Kit # LC270682...
view full answer... - Will Air Lift LoadLifter 5000 AL88375 Fit A 2019 Ram 1500 W/ Off Road Package?
- As long as your 2019 Ram 1500 Laramie with the Off Road Package does not have the optional air suspension the Air Lift LoadLifter 5000 # AL88375 you were looking at will fit just fine.
This kit has a 5000lb load leveling capacity to level your truck when towing a trailer, or carrying a heavy payload.
If your truck does have the factory air suspension there is not a rear suspension enhancement option that is confirmed to fit.
I included a video of the # AL88375 being installed for you...
view full answer... - Will the BedRug Custom Truck Bed Mat Fit the 2007 Honda Ridgeline
- We have a bed mat that fits your 2007 Honda Ridgeline.
First, though, the BedRug Custom Truck Bed Mat, part # BMH17RBS, that you mentioned will not fit the 2007 model.
The one that we have for your truck is the DeeZee Custom-Fit Truck Bed Mat, part # DZ86968. It's made of heavyweight Nyracord and is 3/8" thick. I've linked to a video review of this below.
view full answer... - Does the Curt C13900 Fit a 2019 Ford Escape SEL?
- I spoke to Curt, and the multi fit # C13900 will fit your 2019 Ford Escape. However, this will require drilling and may or may not need trimming of a heat shield or fascia to fully install. That being said, we do also have customer fit options available.
The etrailer.com # e98866 will not require drilling for the install. I also included an install video we have of this hitch on a 2019 Escape for you to take a look at.
view full answer... - Can the Erickson Truck Bed Ladder Rack Fit with a 2009 Chevrolet Silverado without a Bed Liner
- The Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum, part # EM07705, is designed to work without a bed liner as well as with one. So, this will work for you.
However, if you'd still like to have something between the mount and your 2009 Chevrolet Silverado's bed rails, you can use something like the Taylor Made StepSafe Non-Slip Adhesive Pad - 14-1/2" Long x 3-1/2" Wide, part # 36911990. This is thin enough to not cause any obstruction to the clamp and can be cut to the size you...
view full answer... - Does Heat Shield Need To Be Removed To Install Curt Trailer Hitch C13427 On 2021 Hyundai Palisade?
- You do not need to remove the heat shield to install the Curt Trailer Hitch Receiver # C13427 on your 2021 Hyundai Palisade.
Based on the picture you provided it looks like the hitch is pretty close to the heat shield, but you can use the handle end of a hammer or something similar to push and bend the heat shield to clear the hitch.
I included a video of the # C13427 being installed on a 2021 Hyundai Palisade for you to take a look at.
view full answer... - Does Hopkins Endurance 5th Wheel 7-way Connector 41157 Fit A 2021 Ford F-350?
- The Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug # 41157 you were looking at is confirmed to fit your 2021 Ford F-350 Super Duty Crew Cab Dual Rear Wheel with the 8' Bed and is exactly what you need for installing a 7-way connector in the bed of your truck.
The one end will plug inline of your factory 7-way and then the 10' long harness will give you plenty of room to install the 7-way where ever you need in your bed.
7-way connectors may use different...
view full answer... - Does Curt Trailer Hitch Receiver C65CR Fit A 2020 Chrysler Pacifica AWD Launch Edition?
- I checked with my contact at Curt and confirmed that the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C65CR you were looking at is a confirmed fit for your 2020 Chrysler Pacifica AWD Launch Edition.
The # C65CR has a 400lb tongue weight rating and 4000lb trailer weight rating, or 500lb tongue weight rating and 5000lb trailer weight rating when using a weight distribution hitch making this a great option for carrying a bike rack, a cargo carrier, or even towing a trailer.
If...
view full answer... - Demco 5th Wheel Brackets For 2014 Toyota Tundra
- Thank you for your purchase and we do indeed have the correct Demco 5th wheel brackets for your 2014 Toyota Tundra and the Universal Above-Bed Base Rails for Demco Premier Series 5th Wheel Trailer Hitches # DM6071, which are the following part:
- Demco Hijacker Premier Series Semi-Custom Mounting Brackets # DM8552020
These are a confirmed fit for all bed sizes of '14 Tundra, including your 6-1/2 foot bed.
view full answer... - Screen Door Lock Replacement Compatibility
- The Locking Camper Door Latch - Black Item # 37211675 is a universal fit and the mounting screws can be cut down to the needed length for your door.
view full answer... - Connecting A Roadmaster Tow Bar To A 2000 Jeep Wrangler D-Ring Mount
- To connect your Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000lbs Item # RM-522 to your D-Mounts you'll just need some adapters. Depending on the size of your mounts you'll need either the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick Item # RM-035-1 or the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick Item # RM-035.
view full answer... - correct 5th wheel hitch and wedge for 2019 F-250 with Reese Sidewinder 68220
- I have a solution for you, but the updated Curt A-Series 5th wheel hitches are not compatible with Reese Sidewinder 68220. Instead, you can swap out the hitch with something like the Reese M5 5th Wheel Trailer Hitch. This is compatible with the Reese Sidewinder you have when used with Wedge # RP44FR.
If your 2019 F-250 has prep package go with Reese M5 5th Wheel Hitch 20,000 lbs # RP30921. If your truck doesn't have prep package, instead you'll need Reese M5 5th Wheel Trailer Hitch - Single...
view full answer... - Will the Curt Trailer Hitch Receiver Fit a 2021 Subaru Outback Wagon Onyx Edition XT
- The Curt Trailer Hitch Receiver part # C67JR is an excellent option for a 2021 Subaru Outback Wagon. It is listed as a fit for all models regardless of options so yes it will fit a Onyx Edition XT.
view full answer... - Snow Traction Device Recommendations for 2015 Chevrolet Impala
- We have rated our tire socks and tire cables as traction devices that work best in light snow. These traction devices are good for when you're driving on a paved road that has maybe an inch or less of snow on it.
Tire chains that we have labeled as good for deep snow offer a heavier traction than the socks and cables but are not as heavy duty has a typical off-road driving chain.
For your 2015 Chevrolet Impala I recommend either the ISSE Hybrid Snow Socks # TCH70 or the Konig K-Summit...
view full answer... - Will the Hopkins 12-Volt Power Inverter Adapter Work To Power a Winch
- The Hopkins 12-Volt Power Inverter Adapter part # HM11147650 can be used to power a winch, yes. However, it has a max amp draw rating of 25 amps and you also will have to abide by the amp draw rating of the trailer battery charge line circuit on the vehicle you will be pulling power from (usually 30-40 amps). It would work for a small winch most likely.
view full answer... - Is Curt Trailer Connector with Backup Alarm Compatible with 2004 Jeep Grand Cherokee
- I have a solution for you. I recommend the Curt Trailer Connector for Ford and GM Trucks - Backup Alarm - 7-Way Blade and 4-Way Flat # C57101. This will plug right into your factory wiring and will give you that same style alarm you are seeking.
The Curt Trailer Connector for Dodge Trucks - Backup Alarm - 7-Way RV Style and 4-Way Flat
Item # C57100 is only compatible with certain Dodge vehicles.
view full answer... - Will the Curt Base Plate Kit for a 2019 Ford F-150 Work With Blue Ox Tow Bar
- The Curt Custom Base Plate Kit part # C78FR is an excellent option for a 2019 Ford F-150. It is listed as a fit for all models regardless of features. The base plate kit like all base plate kits is not given any sort of weight capacity, it will be suitable for the weight of the vehicle under any condition. The Curt Custom Base Plate Kits are directly compatible with Blue Ox Tow Bars so you will be good to go.
In regards to an installation video, this will be available on the product page...
view full answer... - Bearing Buddy Recommendation for Trailer with Hub Bore of 1.85 Inch
- The Bearing Buddy that is closest to the hub bore on your trailer is the Model 1810 # BB1810. These Bearing Buddies are available in a chrome plated finish and are designed to fit hubs with a hub bore of 1.810 inches.
view full answer...
Go To Results