The Demco base plate you mentioned, part # DM9518016, does not fit your 1997 Geo Tracker but it does fit 1989 through 1995 model years. For the 1997 Tracker 2-door we offer Demco Base plate # DM9517023.
With this base plate you can use Roadmaster's Falcon II Tow Bar # RM-520 by adding adapter kit # DM9523036. view full answer...
The Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms Item # 118-1 is a confirmed fitting base plate for your 1994 Geo Tracker and to attach it to your Reese tow bar you'll need the Roadmaster Tow Bar Adapter # RM-025.
To flat tow you'll also need a braking system, tow bar wiring, and safety cables. I have the following recommendations for you below:
Braking System: Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item # HM39524. This system provides intense,... view full answer...
The Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-050 does have mounting holes, but is a confirmed fit for your 1992 Geo Tracker. view full answer...
You can use a diode kit like # 38955 on your 1996 Geo Tracker but there are several things to consider. First, it looks like your Tracker has turn signals that are separate from the brake and running lights. If this is so then by using a 4 diode kit, all the functions will use the brake/running light bulb and the vehicle turn signals will not be used at all.
If the towing vehicle (RV) has separate bulbs as well and no trailer connector, you would either need to use a tail light converter,... view full answer...
The Curt Trailer Hitch Receiver, # 11128, was designed for the 1993 Geo Tracker and offers bolt-on installation with no welding required. This hitch provides a 1-1/4" by 1-1/4" hitch receiver opening.
The recommended ball mount for the Curt Trailer Hitch Receiver, # 11128, is part # C45521. A pin and clip are included with the ball mount so you'll just need a hitch ball, part # 19256 for 1-7/8" or part # 19258 for 2".
If you need trailer wiring, take a look at the Upgraded Circuit Protected... view full answer...
I was unable to find much information on the P and E Tow-Me tow bar so I cannot say whether or not that it will work with Roadmaster or Blue Ox base plates. I did find one person who said that the attachment from the tow bar to the base plates matched the Roadmaster products but I cannot verify that.
What I recommend is to go ahead and get parts that you know will be compatible. Starting with the Roadmaster base plates, # 118-15, for an economical compatible tow bar you can use # RM-020... view full answer...
Yes. The Blue Ox Aventa II tow bar will work with the Blue Ox Base Plates # BX3503 without any issues on your 1992 Geo Tracker. You may also need a lighting solution for this new setup on your Tracker, so if you need lights also, the Roadmaster Standard Magnetic Towing Lights # RM-2120 are an easy to install choice that won't break the bank.
A complete flat towing setup will consist of a tow bar, base plates, safety cables, tow bar lighting, supplemental braking and possibly a high/low... view full answer...
Yes! The SportRack roof rack # SR1003 and short roof adapter # SR1116 will fit on your 1997 Geo Metro hatchback (also known as a 3 door).
It's a removable roof rack that easily clamps to your naked roof on your 1997 Geo Metro. The weight capacity is 130 pounds but always be sure to check your Owners Manual for the maximum carrying capacity. You will always go with the lowest rating.
The adapter # SR1116 allows you to mount the Sport Rack # SR1003 allows you to increase the distance between... view full answer...
We offer three different base plate kits for your 1997 Geo Tracker 2-Door that will fit as long as your Tracker is not equipped with brush guards. The link provided will take you to our page for all base plate kits.
Roadmaster offers a choice of fixed-arm and removable-arm types. Removable arms allow the vehicle to retain more of its stock appearance when not being flat-towed and will help reduce bumps on your shins. Roadmaster # 118-15 has removable arms; the more cost-effective part... view full answer...
The Curt Trailer Hitch Receiver part # 11128 is indeed a confirmed fit for a 1992 Geo Tracker. It features a bolt-on install with no cutting, drilling, or welding required. This is a class I hitch which means the maximum number of bikes that can be carried is two, regardless of capacity. This has more to do with leverage than capacity. There are unfortunately only class I options for this vehicle.
The only way to safely carry more than two bikes would be on the roof with a roof bike rack.... view full answer...
Yes, the Bestop Strapless Bikini # B5257015 that you referenced is confirmed to fit your 1993 Geo Tracker as long as it has the factory original soft top windshield channel. I have attached the written installation instructions that you can check out as well. view full answer...
You will need the Roadmaster Standard Base Plate Kit, item # 118-1, or the Roadmaster XL Base Plate Kit, item # 118-3, for your 1995 Geo Tracker.
If you will not be towing the vehicle often I would recommend the standard base plate kit but if you are planning on towing more often then I would recommend the XL base plates with one of the nicer tow bars for convenience.
Along with the base plate kit you will need a tow bar and wiring for the towed vehicles taillights. With the Standard... view full answer...
I can't say for certain without knowing what base plates they are, but I can say it's highly unlikely that the base plates from your Volkswagen is going to fit onto your Honda Fit.
I can say, however, that the Blue Ox Base Plate Kit # BX2252 will fit your 07 Honda Fit. This is going to be custom to your Fit and will just bolt up to the chassis of the vehicle using the included hardware.
I'm not sure what you have already, but you're also going to need a set of tow bars like # e47ZR, a... view full answer...
The best towing bar wiring option for the 1994 Geo Tracker is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 which will give you a 6-way round at the front of your Tracker with a coiled cord that connects that plugs into the motor home's 7-way for a nice clean install. The Geo Tracker's lights will activate in sync with the motor homes lights. This is our most popular wiring option. I have attached an installation video for your reference.
You will also need... view full answer...
Does the warning sound eventually go off if the door is shut on your 1996 Geo Tracker? If so that would save you the trouble of having to shut off power to those things to flat tow the vehicle. The Warning and Indicator lights use the fuse in location 8 in the fuse block located under the left side of the instrument panel. However this fuse is also for the ignition system, gages, and 4-wheel drive system. I am not certain that you could still flat tow the vehicle if there is no power to... view full answer...
I have a trailer wiring harness that will work on your 1990 Geo Tracker, but we cannot guarantee the Tow Ready T-One Wiring Harness, # 118372, will fit your vehicle. This harness was designed to fit the 1996-1997 Geo Tracker.
The wiring harness we recommend is the Tow Ready Universal Wiring Harness, # 119178KIT. To install this harness, you will have to gain access to your vehicles tail light wires and splice-in by function. Your tail light wires will not match the wires on the Tow Ready... view full answer...
The # C56175 would be installed on your Tracker if you wanted to tow a trailer with it, but it will not work for towing the Tracker behind a motorhome.
To wire the vehicle for flat towing there are several available systems, as you can see in the article I have linked you to. A magnetic towing light kit like # RM-2120 would be an easy to use, easy to install alternative. If you would prefer a permanently-wired alternative, the article outlines how to determine which choice is best for... view full answer...
We do offer one light-duty Class I trailer hitch for the 1993 Geo Tracker, both the 2-door and 4-door versions. Curt 1-1/4-inch hitch # 11128 offers a 200-lb tongue weight (TW) capacity and includes the hitch pin and clip. A ball mount (drawbar) can be selected separately by referring to the linked article.
The rear impact bar will need to be removed to install the hitch. This is attached with a total of 4 bolts. It cannot be re-installed with the hitch in place.
You'll need ball mount... view full answer...
The SnowBear Winter Wolf Snowplow # SB324-166 fits a range of pickups and other vehicles including certain model years and versions of the Geo Tracker. It does fit your 1994 model year Tracker if it is the 4-wheel-drive model. You will use the custom mounting kit # SB397-050.
This plow weighs a substantial 370-lbs which will put a significant load on your front end. Since we do not offer any front-axle suspension enhancement kits for your Tracker, such as air bags or helper jounce springs,... view full answer...
The Roadmaster Crossbar-Style Base Plate Kit # 1007-2 will fit the 4-door versions of the 1996 Geo Tracker. If you do have a factory brush guard it will not fit. If you have a 2-door the Roadmaster Crossbar-Style Base Plate Kit # 118-15 will be the base plate you need.
Both these kits will allow you to use your Roadmaster Guardian # RM-4000. We do have the Roadmaster Guardian 2nd Vehicle Kit # RM-4000-1 if you are using this with multiple vehicles. view full answer...
Go To Results