Trailer Hitch Fit for 1993 Geo Tracker with Off-Road Equipment Package
Question:
Have off road package on my tracker Heavy duty steel shield over gas tank. Also below rear number round steel bar Can a hitch fit on this type of application What would have to be removed ?? If Anything?? Thank you
asked by: Bud H
Expert Reply:
We do offer one light-duty Class I trailer hitch for the 1993 Geo Tracker, both the 2-door and 4-door versions. Curt 1-1/4-inch hitch # 11128 offers a 200-lb tongue weight (TW) capacity and includes the hitch pin and clip. A ball mount (drawbar) can be selected separately by referring to the linked article.
The rear impact bar will need to be removed to install the hitch. This is attached with a total of 4 bolts. It cannot be re-installed with the hitch in place.
You'll need ball mount # 3593 (or another you select) and either 1-7/8-inch ball # 19256 or 2-inch ball # 19258 if you plan to tow. For a wiring harness use part # 119178KIT.
If you plan to use hitch-mount accessory items like a 2-bike rack or cargo carrier you'll need to choose a compatible Class I rated item to ensure it will work with the Class I hitch. Links to both items are included for you.
Products Referenced in This Question
Tekonsha Tail Light Converter with 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 1-1/2 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Will the Rear Bumper Support Need to be Removed for a Hitch on a 1989 Suzuki Sidekick
- Article: Trailer Hitch Installation Tips
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Will The Roadmaster StowMaster Tow Bar Cover Fit My Duncan Tow Bar
- Q&A: Comparing 2" Trailer Hitches for 2020 Honda CR-V
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: Will AirLift 1000 Rear Air Helper Springs # AL60793 Fit 2004 Chevrolet Tracker
- Q&A: Measurements of Curt Trailer Hitch 11128 for a 1991 Suzuki Sidekick
- Q&A: What Hitch do You Recommend for My Japanese 1992 Toyota Hilux?
- Article: Must-Have Flat Towing Components
- Article: Trailer Wiring Diagrams