The correct snow tire chains for a 1999 Ford F-250 will be based on tire size. If you have 235/85-16 tires then the Titan Chain Snow Tire Chains part # TC2821 will fit. If you have 215/85-16 tires then you'll need the part # TC2819 instead. If you have a different size please let me know what that is. view full answer...
It cannot, as the system you mentioned is for trailer brakes; what you need is a supplemental braking system designed for flat towing, and for your 1998 Ford F-150 I like the Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494.
This will activate the brakes in your F-150 and is a portable system which means it isn't a permanent install so if you change your towed vehicle you can still use it and not have to buy a brand new system. The other parts needed to flat tow your... view full answer...
You were on the right track with the Reese Universal Base Rails # RP30035 ! This kit will mount to the frame of your truck and works on both the 6-1/2 foot and 8 foot beds on the F-150. This kit will provide you with a set of bed rails to install any 5th wheel hitch that mounts into the industry standard 5th wheel rails- the only drawback is that there is some drilling required for this kit.
For that reason you may instead want to go with the Curt Custom Installation kit # C16437-204 which... view full answer...
I'm not quite sure what you mean but I'm assuming since you were looking at a tailgate assist that that's what you're looking for. If that's the case then the DeeZee Tailgate Assist Custom Tailgate-Lowering System # DZ43203 would be a confirmed fit as long as your 1998 Ford F-150 isn't a stepside or flareside model. view full answer...
We have a couple Westin bumpers that fit your 1998 Ford F-150 but part # 31016 fits certain model years of the Dodge Dakota and not your truck.
Instead we have part # 31002 which is chrome plated bumper that will fit your F-150 but we don't currently have a black powder coat bumper that does. view full answer...
According to Curt, the Custom, No-Drill Fifth Wheel Bracket Kit for Ford F-150 # C16437 is going to require you to use Curt base rails, either part # C16104 or # C16204 as these are the rails the mounting brackets were designed to be used with. I have added a link to a video review of the bracket kit for you to take a look at as well as links to video reviews of the rails. view full answer...
Your RBW 15,000 pound hitch should fit in the Reese rails unless they are installed improperly. When the hitch was installed on the F-550 it may have been tightened down with the gooseneck adapter installed and the rails are just out of position for your fifth-wheel hitch. If the hitch you have is not fitting by a small amount I would try to loosen the mounting bolts on the rails and then install the fifth-wheel hitch. After you have the hitch installed you can then re-tighten the mounting... view full answer...
The recommended thermostat switch for the Flex-a-lite 16" Flex-Wave Electric Fan part # FLX236 in the 1999 Ford F-250 4x4 is Flex-a-lite Adjustable Temperature Controller for Electric Fan part # FLX31149 which will actually read the engine coolant temperature to activate the fan when needed. It will also turn the fan on when you have the AC running in the truck.
I have attached the wiring diagram for the thermostatic controller for your reference. view full answer...
For your 1999 Ford F-150 the Curt front hitch part # 31038 has been confirmed as a fit and would work well. The fit info we have for this hitch is that it is for trucks with front tow hooks like yours so it will fit. view full answer...
Since your 1998 Ford F-150 already has a 4-flat connector you will need the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your F-150 with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it.
You will then connect the blue wire to the blue wire on the Tekonsha PowerTrac Electronic Brake Controller... view full answer...
Your 1999 Ford F-250 has plenty of room for an electric fan with shroud like the Derale High-Output, Electric Radiator Fan-and-Shroud Assembly # D16928 which can move 4,000 CFM. The dimensions of this are 28-5/8" wide x 13-7/8" tall x 3-1/4" deep which should fit easily on your radiator, but if you wanted a more custom fit measure the radiator of your truck and let me know the size and I'll be able to get you one that matches up perfectly. view full answer...
Since your 1997 Ford F-150 already has a factory 4-way the only part you will need in order to add a brake controller are the Ford Replacement OEM Tow Package Wiring Harness, 7-Way # 118242 which will upgrade your truck to a 7-way. I have added a photo showing you where the plug normally is on your truck - on the driver's side between the back tires and the end of the truck bed. view full answer...
The Dutton Lainson Pull Pin, Easy Swivel Trailer Jack # DL22560 referenced in your question is designed to fit a 2-1/2 inch diameter weld-on mount like what you have installed on your trailer. This jack will work great with your existing hardware and will provide a weight capacity of 1,000 pounds. It has a total lift of 12 inches and an extended height of 27-5/16 inches. It also is made from heavy-gauge steel for strength and features a zinc plated TUFFPLATE finish for a longer life.
I... view full answer...
If your 1999 Ford F-150 is equipped with a step bumper, then yes this hitch can be used. You may need to drill new holes factory holes do not line up.
You can also use a standard frame hitch like part # 75065 or part # 13355. view full answer...
If you have a light duty 1997 Ford F-250 then you can use # 118242. This harness will not work on Super Duty models. For a Super Duty you would use # 118243. I have included links to the installation details for both harnesses for you to view. view full answer...
If you have a factory 4-flat connection on your 1999 Ford F-150 4x4 then the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM40145 will be a confirmed fit. This custom-fit T-connector plugs into your Ford F-150 wiring harness, which is located behind the rear bumper, near the driver's-side frame rail.
If you do not have the factory 4-way flat, then you will want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56031.... view full answer...
If your 1997 Ford F-150 came with a factory 7-Way or 4-Way then you can use the brake controller wiring adapter # 3035-P for Tekonsha brake controllers, or # HM47715 for a Hopkins brake controller. I have included a link to the installation details for the Hopkins and Tekonsha harnesses for you to view. view full answer...
It sounds like you have done a good job in choosing the correct items for installing a brake controller on your 1998 Ford F-150 XLT with factory tow package. Everything you have chosen is the correct part for your application.
The Tekonsha P3 Brake Controller # 90195 and the Ford Adapter # 3035-P is a good choice for your vehicle. The P3 brake controller is a proportional brake controller which means it will only activate when you apply the brakes on the tow vehicle. It has a motion sensing... view full answer...
Yes, your 15K Reese 30038 5th wheel hitch is compatible with the Reese Universal Base Rails and Installation Kit # RP30035 which is also a fit for your 1999 Ford F-150/F-250 Light Duty that you input for your vehicle info.
If you don't already have a 7-Way in the bed of your pickup then I also recommend installing the Curt # C56070 to make connecting your trailer wiring much easier. view full answer...
The Roadmaster XL Base Plate Kit, # 492-1, will have two brackets that will attach to the vehicle frame. One on the drivers side and the other on the passenger side. It gives two attachment points for a tow bar to connect to.
When towing, the towed vehicles weight should not exceed 40 percent of the towing vehicles weight. The towed vehicle will be in neutral and the steering wheel must be unlocked.
Check the vehicle manufacturers instructions for the proper procedures to prepare the... view full answer...
Go To Results