The Draw-Tite Trailer Hitch, # 41990, is a weld together application for service body trucks. For your 1988 Ford Bronco, the correct Draw-Tite Hitch is # 40050. Please note it will not fit models with a roll pan bumper. I have included a link to the installation instructions for you.
If you will be doing some towing, I recommend the etrailer Ball Mount Kit, # 989900, which comes with 2 ball mounts, 2 balls, a pin with clip, and a carrying bag. For trailer wiring, use Hopkins Plug-In Simple... view full answer...
You will need the Curt Custom Wiring Adapter # C51436 to connect the Curt Assure Trailer Brake Controller # C49UR on your 2023 Ford Bronco. This adapter will connect to the factory wiring included with your tow package making installation a plug and play. view full answer...
We have 2 sets of custom fit mud flaps for your 2023 Ford Bronco. The WeatherTech Mud Flaps # WT25YD are designed to fit models with a plastic rear bumper. This will fit with the factory rock rails and tube steps as well. If you have a steel rear bumper you will need the Mud Flaps # WT29KD. These will also fit with the factory rock rails and tube steps. Both sets are a no drill installation from WeatherTech. view full answer...
It sounds like you want to install the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK55VR on your 2022 Ford Bronco. This will add a 7-way wiring connection and also includes a wiring harness to install a brake controller should you need one. If you think you might tow a trailer with a 4-way, I also recommend grabbing the Pollak 7 Pole to 4 Way Connector Adapter # PK12716.
If you aren't towing a trailer with brakes, there is no need to add a brake controller.... view full answer...
We do have an option for one of those things, which is the bike rack, and it will fit right on the A-Frame of your R-Pod along with the trailer jack, hence it's name:
- Jack-It 2 Bike Rack for A-Frame Trailers # LC429756
The # LC429756 will mount using the same holes as the jack, and it simply goes over the jack, and has 22-1/2" of clearance from the base, which is plenty of room for your jack to extend.
We have had customers use this rack on their R-Pods, and it will hold a pair of... view full answer...
Yes, we have the Curt Trailer Hitch Receiver # C76WR which is custom fit for your 2023 Ford Bronco. This will bolt to your rear bumper with the included hardware. It has a 2" opening for your ball mount or hitch mounted accessories.
For the wiring you will need the Kit # C87BR if you have incandescent tail lights or the Kit # C42WR if you have LED tail lights. Both of these will provide you with a 4-way flat connector that fits most small trailers. It will also allow for Auxiliary Lights... view full answer...
Since you have LED lights on your 2023 Ford Bronco you want to use the Curt # C42WR. This will plug into the connection point behind your tail lights and provide you with a 4-way to power your trailer's signal lights. The # C87BR you looked at is for vehicles with incandescent or halogen lights. view full answer...
Demco unfortunately doesn't currently offer a compatible baseplate for the Ford Performance Heavy Duty Modular Bumper so you would have to choose a different baseplate like the Blue Ox Base Plate Kit # BLU23XR and then use the Demco Dominator Non-Binding Tow Bar # DM9511008-BX, which is designed to connect to Blue Ox baseplates.
If you haven't picked out the rest of your flat towing components then I have the following recommendations for you:
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire... view full answer...
Yes, the Curt Trailer Hitch Receiver # C76WR fits all models of the 2023 Ford Bronco. That includes your Big Bend trim. It has a simple bolt-on installation and comes with a limited lifetime warranty.
If you plan on towing, you will also need wiring and a ball mount. If you have LED taillights you need the # C42WR and for incandescent you need # C87BR. For a ball mount, check out the Curt Towing starter kit # C45534. This comes with a 2" ball, hitch pin, hitch receiver lock, hitch cover,... view full answer...
The Blue Ox and Curt tow bars have different arm designs at the end so to use the Curt Custom Base Plate Kit # C59JR with the modular bumper on your 2021 Ford Bronco you need to use the Curt Rambler Steel Tow Bar # C26FR. The tab design on the Blue Ox and Curt tow bars can sometimes crossover so that they work with each other's base plate kits but in this case the Curt "base plate kit" is just an adapter that fixes to the tow bar.
For a complete flat towing setup you will need a base plate... view full answer...
The Kuat Pivot 2 Swing-Away Hitch # PVD20B (driver's side) and # PVP20B (passenger's side) can be used with other accessories like your Thule bike rack, like the Thule T2 Pro X Bike Rack # TH26ZE, or a hitch mounted ski carrier. It has a 250lb capacity but due to the amount of leverage it will place on the Bronco's hitch it will reduce the hitch's capacity by 50% so you'll need to ensure you stay under whichever capacity is lower.
This only has one receiver tube so you'd have to use a... view full answer...
I would be happy to help you find a wiring harness for your Ford Bronco Badlands but I recommend going with the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 over both of your options. This diode kit allows you to use your Bronco's tail lights and wiring system while preventing feedback from your RV. The install isn't too complicated, but you will need to cut and splice some wires to connect the diodes and wiring to the 6-pole socket.
I was able to verify this... view full answer...
Yes, the SumoSprings Custom Helper Springs # SS56EV will fit your 2021 Bronco. The Badlands trim with the Sasquatch package will not interfere with the installation. These work for both the 2WD and 4WD models and have a 1,000 lb weight capacity. They come with a 30-day satisfaction guarantee and a limited lifetime warranty. view full answer...
I have an option but I do not see that anyone makes a custom fit kit for your 1971 Ford Bronco. With these tow bars there are standards the manufacturers must adhere to so you will not see a universal/generic kit. If you can find a front bumper with 3/4" shackle mounts that is rated for flat towing you will be able to use the Adapter for Jeep D-Ring Bumper Mounts # RM-035 with a Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522.
I do not see any way to use your Roadmaster StowMaster... view full answer...
The Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7K # T43397007K is designed to fit a 3 inch wide coupler. It does not give a height restriction to that coupler size. You can use 3x3, 3x4, or 3x5 inch steel to replace your tongue and use with this coupler. The top of the coupler ball will line up pretty closely with the top of the tongue.
The weight of your trailer should dictate the dimensions of your tongue. If you trailer is 5,000 lbs or less, I would use... view full answer...
The Bully Black Bull Adjustable Side Steps part # BBS-1101S-2 is a cab step and will not fit your 1993 Ford Bronco as you mentioned. We do have similar options which I have attached a list of for you. Out of these options I like the Carr Custom-Fit Side Step part # CARR120251-1. This step is a confirmed fit for your 1993 Ford Bronco and comes in a black finish just like the Bully step. The step is also larger at 5" wide compared to the above 3" wide step which will give a much larger usable... view full answer...
The Diamondstep rear bumper for your 1978 Ford Bronco is 74-1/4" long, 8" wide and 8" tall. This would be the closest available to the 10 inch face you are seeking for your Bronco. There are three options for colors that also come with mounting brackets designed to fit your 1978 Bronco:
- Black Powder Coated Steel: Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 20000-95600
- Chrome Plated Steel: Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 21000-95600
-... view full answer...
We do indeed have base plates that fit your 2022 Ford Bronco Wildtrak that will allow you to use the Roadmaster Falcon 2 Tow Bar # RM-520. The correct fit will depend on if you have the standard factory bumper or have the optional Ford Performance Heavy-Duty Modular front bumper:
- Standard Front Bumper: Roadmaster Direct-Connect Base Plate Kit # RM79RR
- Ford Performance Heavy-Duty Modular Front Bumper: Roadmaster Direct-Connect Base Plate Kit # RM92ZR
These direct-connect base plates... view full answer...
For your 2022 Ford Bronco, you can use the Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR. This hitch will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. But this hitch also extends further out, allowing you to use those accessories with your spare tire on the back of your Bronco.
If you plan to do any towing, you can round out a tow package by adding the etrailer Ball Mount... view full answer...
Go To Results