I checked with Roadmaster for you, and I verified that the thickness is 1-3/8 inches for the anti-sway bar:
- Roadmaster Rear Anti-Sway Bar # RM-1139-153
This is good because the thicker the anti-sway bar, the more roll stiffness there is, which means you get more control over sway and body roll. A rear anti-sway bar is really the best thing you can add to counteract sway and improve stability and handling of your truck.
The # RM-1139-153 is a replacement for the rear factory anti-sway... view full answer...
I checked with Roadmaster and the correct rear sway bar for your class C 2014 Thor 33SW built on a Ford 550 chassis is the Roadmaster Rear Anti-Sway Bar item # RM-1139-161.
If you are looking for the front sway bar it is the Roadmaster Front Anti-Sway Bar item # RM-1139-179.
The Roadmaster Rear Anti-Sway Bar item # RM-1139-146 you were looking at is for the class A Thor motorhomes. view full answer...
The Roadmaster Rear Anti-Sway Bar Item # RM-1139-173 is 1-3/8" diameter in size while the stock anti-sway bar on the 2017 Ford F-350 Super Duty is around 1/2" thick.
Since your 2017 Ford F-350 Super Duty is DRW you'll need the Roadmaster Rear Anti-Sway Bar Item # RM-1139-193 which has a diameter of 1-1/2". view full answer...
I would be happy to. I checked with Roadmaster to confirm the correct part numbers. To add sway bars and a steering stabilizer to your 2019 Thor Vegas motorhome you will need the following parts:
Steering Stabilizer - Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets item # RM47MR
Front Anti-Sway Bar - Roadmaster Front Anti-Sway Bar item # RM-1139-176
Rear Anti-Sway Bar - Roadmaster Rear Anti-Sway Bar item # RM-1139-147 view full answer...
The Roadmaster front sway bar part # RM-1139-148 that you referenced weighs 54 lbs and then # 1139-144 weighs a total of 99 lb for the entire kit. view full answer...
The Roadmaster Bracket for Anti-Sway Bar Split Bushings # RMB140 has mounting holes that are spaced out 3-1/4" center-to-center (see attached).
This is designed to be a replacement part for the Roadmaster Front Anti-Sway Bar and Bushing Kit # RM-1109-116. view full answer...
To add a rear anti-sway to your 2024 Chevy Silverado 3500, I recommend the Hellwig Adjustable Big Wig Rear Anti-Sway Bar item # HE96XR. This sway bar is custom fit and bolts to your Silverado with included hardware. The bar itself is 1-5/16" in diameter and is designed for stock height not a lifted truck. view full answer...
The blue domed bushings in the Roadmaster Rear Anti-Sway Bar kit # RM-1139-145 are shown in the linked photo. Dimensions are indicated for you. Please note that the bushings and hardware for this sway bar are offered on their own as kit # RM-4139-127. view full answer...
Since your motorhome weighs 24,000 lbs and it was built on a 2017 Ford F-53 chassis you will want the following sway bars:
Front Anti-Sway Bar - Roadmaster item # RM-1139-148
Rear Anti-Sway Bar - Roadmaster item # RM25VR
I have linked installation videos below for both parts.
We do have a steering stabilizer for your motorhome. It is the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes item # RM62RR. view full answer...
I have listed the parts you have requested for your 2019 Winnebago Intent 26M below along with any installation videos we may have. The steering stabilizer and sway bars will fit both the 16,000 lbs and 18,000 lbs models and the SumoSprings are confirmed to fit your 26M.
Steer Stabilizer - Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets item # RM33RR
Front Sway Bar - Roadmaster Front Anti-Sway Bar item # RM-1139-148
Rear Sway Bar - Roadmaster Rear Anti-Sway Bar item #... view full answer...
The Thor Ace 30.4 Class A motor coach built on the Ford F-53 chassis with Triton V10 and has a specified gross vehicle weight rating (GVWR) of 18,000-lbs and a combined rating (GCWR) of 23,000-lbs. If you were to use an anti-sway bar or steering stabilizer rated for higher than your RV actual weight there would be no benefit and the functionality of such devices could suffer.
This is NOT like a scenario where you are selecting tires with a higher weight load range than you actually need.... view full answer...
The End Link Kit for Roadmaster Rear Anti-Sway Bar for Motorhomes # RM-590185-00 is 10-1/4" long overall and the center of the eye to the center of the eye measurement is 8-1/2". view full answer...
The Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK22-RSSA is approximately 20 inches long and will fit a 2013 Ford F-53 chassis with a GVWR of 15,700 lbs 16,000 lbs 18,000 lbs, 20,500 lbs, and 22,000 lbs.
As a note the best way to enhance the ride of your motorhome which was built on a 2013 Ford F-53 chassis is to add an aftermarket rear anti-sway bar because they are a vast improvement over the OEM sway bars and their placement at the rear... view full answer...
Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item # HE96XR is confirmed to fit your 2024 Chevy Silverado 3500. This sway bar will minimize lateral movement in your rear end and improve stability.
This sway bar is made in the USA and includes everything needed to install on your Silverado. I have linked a review video below where you can see the functions of the sway bar discussed and demonstrated. view full answer...
The Roadmaster Rear Anti-Sway Bar # RM-1139-147 uses part # RM32VR (B315) for the end links, which are 11" in length. If you need longer end links Roadmaster can get you the correct size for your motorhome since you have a lift. view full answer...
Yes, the Hellwig Adjustable Rear Anti-Sway Bar item # HE66XR is confirmed to fit your 2024 Chevy Silverado 3500. This will minimize lateral movement in your rear end and improve stability. You will really notice this installed when you are going over uneven roads or making turns.
This sway bar is made in the USA and includes everything needed to install on your Silverado. view full answer...
The Axle bracket on # RM-1139-170 has an overall length of 5-1/2" and a width of 2". I also got the overall depth at 1-1/2" and the distance between mounting holes center on center is 4 inches.
The bushing bracket/shackle has an overall length of 5-1/2". The width of the shackle is 1-1/2" and width of the blue bushing is 2". The diameter of the bushing hole is 1-1/8", the length of the blue part is 2 inches where the shackle slides over and the distance between mounting holes center on... view full answer...
The Equal-i-zer Weight Distribution System # EQ37100ET that you referenced does include 4-point sway control to keep your trailer steady behind your tow vehicle but this system uses integrated sway control that is built into the head and lift brackets. It does not require a separate friction anti-sway bar like # 17200 or # 83660. These friction bars do use a small 1-1/4-inch hitch ball like # RP58060 for installation. The sway control built into the Equal-i-zer will perform much better... view full answer...