Expert Answers about Chrysler
- Fastway e2 Weight Distribution System for 2018 Chrysler Pacifica
- The Fastway e2 Weight Distribution Item # FA92-00-0450 is absolutely the right weight distribution system for your trailer and 2018 Chrysler Pacifica. It has a 450 lb max tongue weight which only exceeds your trailer tongue weight capacity by 110 lbs. It will require a 2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank Item # 40038.
view full answer... - Recommended Hitch for a 2022 Chrysler Pacifica Hybrid
- Between the Curt Trailer Hitch item # C29UR and item # C13383, I recommend the item # C29UR because it doesn't hang down as much. Both hitches are confirmed to fit the 2022 Chrysler Pacifica Hybrid and have identical 4,000 lbs towing capacities. However, the item # C29UR has a completely concealed crossbar. This not only looks better but also helps with ground clearance. The rear end of your van already sits low enough. You really don't want to drop your hitch receiver down any lower than...
view full answer... - What is the Capacity of Curt Trailer Hitch 11132 for a 2007 Chrysler PT Cruiser
- I am not sure what you mean by system rating but the Curt trailer hitch # C11132 is rated for 200 pounds tongue weight and 2,000 pounds gross trailer weight. I have included a link to the installation instructions for you to view. Be sure to consult the vehicle owners manual for its towing capacities. Always go by the lower rating. The hitch meets Regulation V-5 and SAE J684 regulations.
If you plan on towing with this hitch the correct ball mount to use is # C45520 with pin and clip #...
view full answer... - Power Consumption of Jensen LED Television with DVD Player # JTV1917DVDC
- According to the manual for the Jensen LED Television with DVD Player # JTV1917DVDC, which I have sent to you, the power consumption is 28 watts. This LED television is 19 inches, HD ready, and comes with a tabletop stand and wireless remote control. It also has a VESA 75mm x 75mm mounting pattern if you want to mount it on your wall.
view full answer... - Can a 2007 Chrysler Town & Country Van Pull a 2010 Lark 7x16 Trailer
- The towing weight capacity of your 2007 Chrysler Town and Country ranges from 1,700 lbs to 3,800 lbs depending on what your Town and Country is equipped with. You can consult your owner's manual to find out your specific towing weight capacity and if you don't know what your Town and Country is equipped with you can take your VIN to a dealership and they can let you know.
Since the trailer that you are interested in looks like it could have a Gross Vehicle Weight rating (GVWR) of up to...
view full answer... - Size of Air Lines of Air Lift Load Controller Compressor System AL25856
- The air lines of the Air Lift Load Controller Compressor System for Air Helper Springs # AL25856 are 1/4 inch.
It is highly recommended you use the Air Lift Air Hose Cutter # AL10530 for the air lines to get the most concise cut of the lines.
view full answer... - Lumen Output of the CIPA EVO Formance Light # CM93186
- I spoke with my contact at CIPA and he informed me that the Evo Formance part # CM93186 has just over 100 Lumen.
view full answer... - Hitch Opening Down to the Ground on Draw Tite Hitch part # 76046 for 2017 Chrysler Pacifica
- When we installed the etrailer hitch part # e98903 on a 2017 Chrysler Pacifica we found that from the top of the hitch opening down to the ground the distance was 13 inches. You need to measure from the bottom of your coupler lip when the trailer is level down to the ground. The difference between these two dimensions is the rise/drop you need.
view full answer... - How Far Recessed from Bumper is Draw-Tite Hitch # 36455 Installed on 2011 Chrysler Town and Country
- In the installation video for Draw-Tite hitch # 36455, which I have linked for you at right, you can see the position of the installed hitch at the 1:20 mark. This shows an underside view of the 2011 model year's rear bumper after hitch installation. I have also linked a screen shot image with an arrow to indicate the distance between the edge of the receiver tube and the rear edge of the bumper - just about 5-inches.
You can use this measure to compare to the clearance provided by your...
view full answer... - How to Measure the Rise of a Ball Mount for a Chrysler PT Cruiser
- The rise is the distance from the top of the shank to the top of the ball platform, with the ball mount in the position (rise) it will be used in. I am including a link to a FAQ page that will describe how to measure and choose the correct ball mount.
The 2004 Chrysler PT Cruiser uses a Class I 1-1/4 inch hitch. All Class I hitches have to use the ball mount that is recommended from the manufacturer.
The Draw-Tite Ball Mount, part # 3593, is the ball mount that is recommended for the...
view full answer... - Is there a Maximum Ceiling Height for the Thule MultiLift Cargo Lift and Storage System
- I checked with Thule and the max length from the mounting surface to the ends of the ropes on Thule hoist # TH572 is 200cm which in inches is 78.8 inches or about 6-1/2 feet. So from the bottom of the item on the roof of the vehicle that you need to hoist up to the mounting surface for the hoist cannot be further than that 6-1/2 feet.
Another possible option is to use a hoist such as # DL25727. Its cable is 50 feet long.
view full answer... - What are the Lengths from Pin Hole to Tow Loop on the Bestop and Tow Ready Hitch Mounted Tow Loops
- The Tow Ready loop, part # TR63046 measures 7-1/16 inches from hitch pin hole to center of tow loop.
The Bestop Loop measures about 6-5/16 inches from the hitch pin hole to center of tow loop. The version I have in front of me also uses a red shackle bolt.
view full answer... - Distance From Center of Hitch Pin Hole to Bumper on 2010 Chrysler Town and Country
- The distance from the center of the hitch pin hole of etrailer.com Trailer Hitch Receiver # E98854 to the edge of the rear fascia (or the edge of the rear bumper) on your '10 Town and Country is approximately 4 inches.
For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 118552. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball...
view full answer... - Towing Capacity of 2006 Chrysler 300 V6
- From what I was able to find on your 2006 Chrysler 300 V6 it looks like can tow up to 1,000 lbs.
To tow you'll need a hitch like # 76145, trailer wiring like # 118404, and a ball mount kit like # 989900.
view full answer... - Extended Ball Mount Measurements and Compatibilities for a 2012 Chrysler Town and Country
- You won't have any problems using the Extra Long Ball Mount, # BM20 by Brophy, on your 2012 Chrysler Town and Country as long as you have a 2-inch receiver on your hitch. This ball mount has a 10,000 lb gross trailer weight capacity and a 1,000 lb tongue weight capacity. Be sure you do not exceed the capacity of the lowest rated item while towing. You may also want a hitch ball, # 19247 or #19260.
If you want to know the measurement for the extension, then you will want to start from...
view full answer... - Measuring for Trailer Hitch Receiver Ground Clearance on a 2013 Chrysler 300
- I went out and took the measurement on both hitches for you. The Draw-Tite, part # 76145, measures about 9 inches from the top of the wings where the hitch mounts to the vehicle's frame to the bottom of the collar around the receiver opening. The Curt, part # C13093, sits a lttle lower, the same measurement is about 10 inches.
I've attached pictures, as well as an install video for each hitch.
view full answer... - Hitch Pin Hole to Bumper Dimension for Curt Hitch part # C12264
- The distance from the center of the hitch pin hole of the Curt Hitch part # C12264 to the furthest point out on the rear bumper of your vehicle would be right at 5 inches.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
view full answer... - What Does etrailer hitch # e98903 Weigh
- The etrailer hitch part # e98903 that you referenced weighs 42 lbs.
view full answer... - How Exact Does Rise/Drop Figure Need to be For Ball Mount
- Getting the correct rise/drop is important but if you can't get it totally exact it's not that big of a deal. Getting it pretty close is often times just as good. This is why there aren't ball mount rise/drop figures available in every possible height. On a vehicle like your 2012 Chrysler Town and Country that is going to have some suspension sag when the weight of the trailer is put on the hitch it typically works out the best to have the rise/drop from the ball mount on the higher side...
view full answer... - Dimensional Drawing for Curt Hitch 13465
- I attached a dimensional drawing for the part # 13465 for you to check out that I got from Curt.
view full answer...
Go To Results