The item you selected, Classic Accessories Veranda Patio Chair Cover, part # 052963789324, has a length of 32-1/2 inches, is 25-1/2 inches wide, and has a height of 34 inches.
The cover that we have available that will fit your chairs the best is the Classic Accessories Patio Lounge Chair Cover, part # CA70912. The Lounge Chair Cover measures 38 inches wide, a length of 33-1/2 inches, and a height of 31 inches. All the Classic Accessories Chair covers are not designed to completely cover... view full answer...
The Classic Accessories Deluxe 4 - Sided Golf Cart Enclosure, part # 052963720723, fits most two person golf carts and measures 64 inches long by 43-1/2 inches wide in the front and 51 inches wide in the back.
The thickness of the vinyl windshiled on the Classic Accessories Deluxe 4 - Sided Golf Cart Enclosure, part # 052963720723 , is .3 millimeters. and the material is heavy duty but a thickness is not provided by the manufacturer.
I have personally handled one of these covers and... view full answer...
I spoke with my contact at Classic Accessories on the Classic Accessories Deluxe Heavy-Duty Cover for Teardrop Trailer, part # CA80198, and they said the width is 6-1/2 feet. They said the width is not listed because that cover is designed to fit the Forest River R-Pod 150 Series teardrop trailers, which they said are all the same width. view full answer...
In regards to the Trailer Hitch Reducer and Extender part # e53YR, the distance from the accessory end to the center of the hitch pin hole is 2-1/2" which includes the collar. I have attached a photo as well as a video of this measurement for you. view full answer...
The beam width of the Classic Accessories Boat Cover by StormPro, part # 052963889680, is 116 inches. The cover is not matched to specific boats, however, it is a semi-universal fit for boats between 22 and 24 feet long. view full answer...
The Replacement M10 Channel Nut for Rhino-Rack Accessories # RR89TB has a M10 thread size and base dimensions of 35mm x 19mm x 8mm. view full answer...
It is possible that the MaxxTow Ball Mount with 2 Inch Accessory Receiver # MT70066 will work for you, but you will want to take a quick measurement or two first.
The # MT70066 measures 8 inches from the hitch pin hole on the base to the hitch pin hole on the accessory receiver, and 5 inches from the center of the hitch pin hole on the base to the rearmost point on the accessory receiver. You will want to ensure that you have enough clearance at your bumper for the MaxxTow # MT70066 to... view full answer...
On Draw-Tite trailer hitch # 24920 and all of the hitches for the 2015 Honda Fit the receiver will be directly below the rear fascia. So if you measure from the bottom most part of the fascia down to the ground and subtract 1-3/4 inches that will be the approximate ground clearance measurement once the hitch is installed.
On smaller vehicles that are low to the ground to start with, adding a trailer hitch usually reduces ground clearance so you have to keep that in mind when choosing accessories.... view full answer...
You will be able to install an Inno roof rack for your 2016 BMW 328i with fixed points. This roof rack will consist of the following items:
Inno Square Crossbars - Steel - Black - 46" Long - Qty 2, part # INB117
Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4, part # INXP
Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet, part # INTR131
This roof rack has a maximum weight capacity of 140 lbs. This roof rack will... view full answer...
The crossbars of the Yakima Rack and Roll Trailers like the part # Y08107 that you referenced are dimensions that are standard for roof rack accessories. So you would not be limited to only using Yakima roof rack carriers. Any standard roof rack accessory that's designed to fit a square or round crossbar is going to fit and work well. view full answer...
The Classic Accessories Toy Hauler Screen # 052963799842 measures 96-inches wide x 90-inches tall, so it is plenty large enough to fully cover your trailer's 75-1/2 x 79-inch opening. Its size is adjustable. This screen is intended for fiberglass or aluminum trailers. If your trailer is steel then instead use part # 052963799941 which is also adjustable for a good fit. view full answer...
The stop punched into the receiver tube is 1-5/8 inches rearward from the center of the hitch pin hole or 3-7/8 inches rearward from the front of the receiver tube (see photo). The stop will prevent use of an adapter meant for the higher weight rated Class II receiver.
The Brophy Hitch Adapter we offer, part # HTAD is compatible with Class I receivers and would work with the # 24880. The distance from the center of the hitch pin hole in the shank to the end of the shank is 1-1/2 inches.
Keep... view full answer...
The bench seat cover of the Classic Accessories UTV Seat # 052963783773 the measures 55" long, 17" wide and 5" deep. The back rest cover measures 55" long, 15" wide and 5" deep. view full answer...
Since the Spectro # SWC9538 is rated for up to a 15 amp fuse that means it can handle up to a 180 watts since wattage is volts (12) multiplied by amps. view full answer...
Class I and II accessories like the Draw-Tite Class I Ball Mount you referenced all use a 1/2 inch hitch pin or lock. Class III, IV and V hitches use the thicker 5/8 inch diameter hitch pin or lock.
For your Class I accessory, I typically recommend a stainless locking hitch pin, like part # 40106. view full answer...
The Classic Accessories seat covers have an overall height (including the portion that goes over the lower part of the seat that you would sit on) of 33 inches, the portion that goes just over the seat back is 24 inches, and the width and depth are then also both 24 inches. view full answer...
The Classic Accessories UTV rear window you're looking at, part # CA78637, is about 49 inches across not including the straps. It's also about 34-1/2 inches tall.
It's custom designed to fit a Yamaha Rhino from 2007 to 2013. If you can tell me the model of year of your Cub Cadet or the width you're looking for I may be able to find one that fits if this one doesn't. view full answer...
We do have the Class II Draw-Tite # 36597 trailer hitch for your 2018 Honda CR-V. This is essentially the same trailer hitch as the Draw-Tite # 76128 except that it has a 1-1/4" receiver instead of a 2" receiver.
I actually recommend going with the 2" receiver for your CR-V because you will actually be able to use a wider variety of accessories with the larger receiver. If you currently have an accessory that fits a 1-1/4" receiver then I also recommend using a reducer like part # HT02... view full answer...