Expert Answers about Workhorse
- Steering Stabilizer and Anti-Sway Bar for Workhorse P3500 Motorhome
- The correct steering stabilizer for your Workhorse P3500-based motor home that has the OEM dampener is Roadmaster's # RM-RSSCP30, which you referenced. It replaces the factory dampener. This unit installs on the steering mechanism on one end and to the chassis undercarriage on the other end. Installation time is about an hour with no drilling or welding needed.
The written instructions are linked for your reference.
If you have the coil spring independent suspension (and NOT the widebody...
view full answer... - Installing a Tekonsha Brake Controller in a 2006 Dolphin LX motorhome.
- There isn't a brake controller wiring harness for the 2006 Workhorse RV chassis. It is possible that the RV came with one. Sometimes they plug in under the driver's seat but would otherwise be located under the dash. It is also possible that it does not have a place to plug a brake controller into and could just have tow package wires under the dash. To check this look for a bundle of wires up under dash with a white tag on them.
If you cannot locate a wire bundle or place that a brake...
view full answer... - Suspension Enhancement Kits for 2009 Workhorse W18 Series Motor Home
- We can definitely help you with suspension upgrade components for your 2009 Workhorse W18. We do carry both Roadmaster and Blue Ox brands and while both companies make excellent products our in-house installers slightly prefer Blue Ox items for their often easier installation and for their long-term performance.
If you prefer Roadmaster products you can see all items made for your W18 using the link provided. The available items include the front anti-sway kit # RM-1259-116, and rear axle...
view full answer... - Replacement Polyurethane Bushing Kit For 1-3/4" Diameter Sway Bars
- It sounds like you are needing the Roadmaster Polyurethane Bushing Kit # RM-4109-106. This includes bushings for a 1-3/4" factory sway bar.
view full answer... - Trailer Hitch Receiver for Motorhome With 8,000 Pound Capacity
- We do have some adjustable bolt-on hitches for motorhomes but they won't have a high enough capacity. For a hitch that fits your motorhome and can handle 8,000 lbs you need the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07.
This is a Class V receiver with a maximum gross trailer weight of 16,000 lbs. This fits frame widths up to 44" and has a weld-on installation. You will need to take the hitch to a certified welder for installation.
view full answer... - Availability of Steering Stabilizer for 1998 Pace Arrow Workhorse P32 Motor Home
- We do offer a Roadmaster Reflex Steering Stabilizer for 1998 Workhorse P-Series Motor Homes, part # RM-RSSCP30, intended for vehicles with an OEM dampener.
This installs without drilling or welding (in about an hour) and it replaces the factory dampener. This unit attaches to the steering mechanism on one end and to the chassis undercarriage on the other end.
view full answer...
Go To Results