Expert Answers about Toyota Tundra
- Availability of a Brake Controller Adapter for a 2015 Toyota Tundra
- Yes! If you have a factory installed 7-way trailer connector you can use a Tekonsha Plug-In Wiring Adapter # 3031-P. The adapter will plug into your connector on your 2015 Toyota Tundra built-in brake control wiring harness.
The brake controller I recommend is the Tekonsha Prodigy P3 # 90195. It has 5 storable settings so you can customize multiple trailers and the controller applies the same amount of braking power as the tow vehicle.
I have included a couple FAQ's and videos for you too.
view full answer... - Towing Mirror Options for 2006 Toyota Tundra with Heated Electric Mirrors
- Currently the only option in a custom-fit towing mirror for your 2006 Toyota Tundra with heated electric OEM mirrors is the Longview # CTM4000 which is indeed a slip-on type.
Your other option will be a universal-fit towing mirror. The link at right will let you review all universal towing mirrors which include clip-on types as well as door- and fender-mount varieties.
view full answer... - What 4 to 6 Way Brake Control Wiring Kit is Available for 2002 Toyota Tundra
- The Brake Controller 6 and 4 Way Installation Kit, 10 Gauge, # ETBC6, is available which will give you the 4 to 6 way connection instead of the 4 to 7 way connection.
view full answer... - Do Trailer Brake Magnets Touch Brake Drums All the Time
- A trailer brake assembly magnet is going to lightly touch the armature surface of the brake drum even when the brakes aren't applied. They basically glide along the smooth surface until you apply the trailer brakes which magnetizes them and then activates the braking mechanism to slow the trailer.
view full answer... - Verified Timbren Suspension Enhancement Fit for a 2004 Toyota Tundra
- I checked with Timbren just now and for your 2004 Toyota Tundra they recommend the # TTORTUN4 so that would be the correct part number. We put an extra T in front of the part number but it's the same thing.
view full answer... - Eye Bolt Accessory for Use in Yakima Tracks on Truck Topper
- Yakima does not offer a track-mount eye bolt. I confirmed this with my Yakima contact.
But we do offer the Rhino-Rack Eyebolt for Aero/Sportz Crossbars # S604 that you referenced. This fits a square channel that measures 13/16" by 13/16" so if your tracks have the same width it will work for you.
view full answer... - Is T-Connector For One Fill Valve Available For Firestone Ride Rite Kit On 2014 Toyota Tundra
- The Firestone Ride-Rite Air Helper Springs, part # F2445 has two separate fittings, one for each side of the vehicle.
We do offer the fitting as an individual part. It is part # F3025-1. This will allow you to use one fill valve to supply air to two lines instead of using 2 fill valves.
I have attached a couple of videos that you can check out that show the installation of the Ride Rite system installed in a typical manner, and an installation video using the T-connector you can check out.
view full answer... - Trailer Hitch & 4-Pole Wiring for 2004 Toyota Tundra SR5 with Towable Bumper
- For your 2004 Toyota Tundra SR5 with towable bumper we offer a 2-inch Class III hitch option from Curt, their hitch # 13184. This hitch will require some drilling for installation. A video showing installation on a 2004 Tundra is linked for your reference.
If you also need a 4-pole wiring harness you can use part # C59236. For a ball mount and hitch ball you may be interested in our kit # 989900.
view full answer... - Towing Mirrors for 2014 Toyota Tundra
- According to K-Source, the # KS70103-04T mirror is only a fit through the 2013 model year. I was told that there is a mirror in development for the 2014 Tundra, but they were not able to provide a timetable on when it might be available for sale.
There are some universal towing mirror options available. K-Source offers the # KS3891. The ratcheting rubber straps allow for a secure fit to the mirror.
Another option is the CIPA Deluxe Door Mount Mirror, part # 11650. Although it's not the...
view full answer... - Front-Mounted Hitch Receiver for 2017 Toyota Tundra 4X4
- We can offer you a choice of two 2-inch front-mounted hitches for your 2017 Toyota Tundra. You can see both the Curt and Draw-Tite options by clicking on the link provided.
Both Curt hitch # 31198 and Draw-Tite hitch # 65080 share 500-lb vertical load and 9000-lb line pull ratings. Both are no-drill installations using included hardware. The Curt has the advantage on price so I suggest this one over the Draw-Tite. Installation instructions are linked for you.
If you plan to use a snowplow...
view full answer... - Slide-In Camper Cover Needed
- The Adco SFS AquaShed Truck Camper Cover, # 290-12264 that you link to is 17-3/4' in length. These covers do fit various size campers, there will be slack in the material on smaller campers but this may be more than you prefer.
The Camco UltraGuard Slide-In Camper Cover at 16-1/2' length, # CAM45771. This is considered a heavy-duty cover that is UV-resistant and made of polypropylene with a triple layer top panel providing maximum resistance to rain and snow. But this will not have the...
view full answer... - Is there a Brake Controller Harness for a Tekonsha Voyager and a 2010 Toyota Tundra
- There is an adapter that you can use that will simplify your installation. You can use part # 3040-P and just cut off the black connector. You will color match the cut wires from the harness to the wires on the back of the controller. Once you have these wires spliced, the controller will plug right into the Tundra. The brake controller connector should be just above the emergency foot brake pedal on the left.
I have added a link to the instructions below that shows a picture of where...
view full answer... - TracRac Ladder Rack Systems for 2015 Toyota Tundra SR5 with Factory Deck Rail System
- We do have ladder rack options for your 2015 Toyota Tundra SR5 with 6-1/2-foot bed and with the factory deck rail system. All are shown on the linked page.
For maximum weight capacity and the ability to adjust the rack's uprights to different positions for flexibility I suggest the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-610. This 2-bar rack features aluminum construction for light weight and freedom from corrosion. It installs without drilling and include load stops...
view full answer... - Availability of Air Bag Suspension Kit for 2001 Toyota Tundra 2WD
- Your 2001 2WD Toyota Tundra and your 2013 Tacoma do not use the same Firestone air suspension kits so you cannot move the kit from the Tacoma over to the Tundra, but we do have two kits made specifically for your 2WD Tundra that you can see on the linked page. Firestone does not offer a brackets-only kit that will allow transferring the air bags between trucks.
Firestone Ride-Rite kit # F2245 fits the 2WD 2001 Tundra with the TRD package.
If you want automated inflation/deflation from...
view full answer... - Chrome Replacement Towing Mirrors for a 2007 Toyota Tundra
- I did some checking and we do have some chrome replacement towing mirrors for the 2007 Toyota Tundra. They are set # KS70131-32T. The mirrors have turn signals, electric operation, and heat features. But if the stock mirrors do not have those functions then they will still not function on these new mirrors though the mirrors will still physically fit.
view full answer... - Does the Rola Haul-Your-Might Come as a Single Rack
- The Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs part # 59799 are really nice ladder rack systems.
Sorry but they only come as a kit and not individually.
view full answer... - Replacement 7-way for 2018 Toyota Tundra with Factory Wiring
- Curt offers a Replacement 7-Way connector # C55774 that will plug in to the round U.S. Car connector included in your factory tow wiring. This kit includes a 7-way socket and mounting bracket and it also includes a 4-pole connector as well.
The part you referenced, Pollak 7-way # PK11893, is a socket only without harness (and without the 4-pole connection feature) that also uses the same U.S. Car connector shown in the included photo.
view full answer... - Trailer Brake Controller Harness for a Tekonsha P2 and a 2010 Toyota Tundra
- With a factory tow package on your 2010 Toyota Tundra, you will need the Tekonsha Wire Replacement, # 3040-P. This harness includes a separate ground wire that must be attached to a bare metal surface in order for the brake controller to function properly. We actually have a video, linked below, that shows the Tekonsha P2 Brake Controller and the 3040-P harness being installed on a 2010 Tundra.
view full answer... - Does Using Grease in Weight Distribution System Affect Effectiveness of Sway Control
- Weight distribution systems that advertise as having friction sway control built into the heads and spring bars of the system should not be lubricated at those points as the grease effectively removes the sway control. The dual cam setups like the Strait Line part # RP66074 that you referenced do not use friction as a way to control sway greasing them would not reduce the effectiveness.
view full answer... - Hopkins Brake Controller Wiring Adapter Part # HM47815 Needed For 2008 Toyota Tundra
- The wiring adapter you are looking for is actually part # HM47815, which would fit your 2008 Toyota Tundra assuming it was equipped with the factory tow package with the 7-way trailer connector at the rear bumper. The under-dash connector is located above and to the left of the emergency brake pedal.
We have an installation video showing a controller being installed on a 2007 Tundra. Although the video shows a different model controller and wiring adapter being installed, it will still...
view full answer...
Go To Results