Expert Answers about Toyota Corolla
- Are Blue Ox Base Plates Available For the 2012 Toyota Corolla XRS
- I spoke with my contact at Blue Ox and they have not tested the Blue Ox Base Plate Kit, # BX3781, on any 2012 Toyota Corollas and cannot give a clear answer whether it will fit or not.
I would recommend the Roadmaster XL Base Plates, # 1188-1. Roadmaster has verified that these base plates will fit all models of the 2012 Toyota Corollas including your 2012 Toyota Corolla XRS. These base plates will work with all Roadmaster tow bars and they will work with Blue Ox and Demco tow bars with...
view full answer... - Affordable Bike Rack That Will Carry 2 Fender Bikes On a 2011 Toyota Corolla
- The Thule Apex XT 2 Bike Rack # TH9024XT looks to be the bike rack that meets all your needs. It is a hanging mount that will hold the bike by the frame. If you have an alternative frame bike a Thule Bike Adapter Bar # TH982XT will be needed. The rack fits both the 1-1/4" and 2" receivers including a class I Curt Receiver # C11265 that fits your 2011 Toyota Corolla LE. It will support 2 bikes up to 37.5lbs each. And has an integrated anti-rattle stinger hitch for tool-free connection.
The...
view full answer... - Replacement Catalytic Coverter Recommendation for 2003 Toyota Corolla
- We offer a direct-fit, 49 state legal (except for California) catalytic converter for your Corolla, part # MF93200.
The converter you referenced, part # MF36760, is for a Nissan Maxima or Pulsar.
view full answer... - Available 1/2-Inch Diameter Plunger Pin for Trailer Jack
- We offer four different 1/2-inch diameter plunger pins that are shown on the linked page. Two of the four are bent pins, parts # F0933307S00 and # PLGPIN-12 that you referenced. I went to our warehouse and measured both of these. While they are not exactly identical they are essentially of the same dimensions.
Please refer to the linked photo. From the end of the pin to the clip hole is 1-1/4-inches; from the clip hole to the bend is also 1-1/4-inches; overall end-to-end length is 5-inches.
view full answer... - Are There Baseplates For Flat Towing A 2022 Toyota Corolla
- Since the 2022 Toyota Corolla can not be flat towed we only carry tow dollies for dolly towing your Corolla, like the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes # DM9713093. This tow dolly comes with disc brakes, wheel straps, and LED lights all in one package so all you have to do is drive your Corolla up on it and strap it down to be ready to go.
view full answer... - High/Low Adapter for a 2015 Toyota Corolla with 1-1/4 Inch Trailer Hitch
- We do have an option for an adapters for a 1-1/4 inch hitch but it can only be used in the rise position, # HT5R (Class I and II).
Please note that the use of any adapter will reduce the tongue weight capacity of the trailer hitch by 50 percent.
view full answer... - Availability of a 1-1/4 to 1-1/4 Hitch Adapter With a Rise
- We don't offer a 1-1/4 to 1-1/4 inch rise adapter such as the # RM-077-8 you'd looked at, but we do have a combination of two parts that could possibly provide a solution for you.
I'd recommend using the CR Brophy # HT5R along with the # HT02. The # HT5R is a 1-1/4 to 2 inch adapter with a 5 inch rise. You'd use the # HT02 to reduce the 2 inch receiver on the # HT5R back down to a 1-1/4 inch adapter. You'll need one # PC3 hitch pin to retain the # HT02 in the adapter, and one # PC2 hitch...
view full answer... - Availability of Euro-Style Ball Mount for Curt Class I Hitch Installed on 2009 Toyota Carolla
- The Curt # C45561 Euro-Style ball mount you referenced is exactly what you'll need. The ball mount will work fine with your # C11265 Class I hitch once it's installed. Keep in mind that the ball mount carries a 3500 lb towing/350 lbs tongue weight rating, but that your hitch is only rated for 2000 lbs towing/ 200 lbs tongue weight. Because of that difference in capacity between the hitch and the ball mount, you'll need to abide by the rating of the lower rated component, which would be...
view full answer... - Base Plates Needed to Flat Tow 2001 Toyota Corolla with Blue Ox Alpha Tow Bar
- The only base plates available for your 2001 Toyota Corolla are the Roadmaster EZ Base Plate Kit, # 521162-1. This kit offers the hidden bracket design and will install on the Corolla's frame to provide attachment points for your tow bar. Blue Ox base plates are not available for your Corolla.
Since you mention that you already have a Blue Ox Alpha Tow Bar, # BX7380, you would just need the Roadmaster Tow Bar Adapter, # RM-032, in order to use the tow bar with the Roadmaster EZ base plates.
Now...
view full answer... - Trailer Wiring Harness for 2001 Toyota Corolla
- I'd recommend the Tow Ready Circuit Protected Taillight Converter Kit for your Corolla, part # 119178KIT. This is a hardwired option. Due to the age of the vehicle, and the fact that the Corolla wasn't popularly used as a tow vehicle, there isn't a plug and play wiring option available.
I'll link you to an install video showing the wiring harness being installed on a newer Toyota Avalon. Although the wire colors in the Avalon are probably different, the video will give you a good idea...
view full answer... - What Length Trailer Was Hopkins Electronic LED Smart Level for Trailers # HM08201 Set Up For
- The Hopkins Electronic LED Smart Level for RVs and Trailers # HM08201 is designed to give you a rough estimate of how much further you'd need to jack the trailer up or down to get it level. Each red light will indicate 1-1/2 inches that it needs to move up or down. This can also be set to 1 inch.
This was configured with the average RV length in mind so while it will work with your 45 foot long trailer you might find that the indicator lights aren't perfect in terms of the amount of inches...
view full answer... - Trailer Hitches and Towing Capacities for 2014 Toyota Corolla
- Makers of trailer hitches design their products based on the capabilities of the cars they are intended to fit. In the case of the 2014 Toyota Corolla only light-duty 1-1/4-inch Class I hitches are made. This is simply because the Corolla's frame is not strong enough to support a hitch of higher capacity than this Class I type. You might care to review the linked articles on hitch sizes and classes. The linked page will show you all three choices in a Class I hitch for your Corolla.
On...
view full answer... - Recommended Cartridge Style Engine Block Heater for 2013 Toyota Corolla with 1.8L Engine
- We do not have a cartridge style engine block heater for your 2013 Toyota Corolla with 1.8L Engine but we do offer magnetic oil heaters that attach to your oil pan such as the Kat's Heaters 90-watt dipstick type heater # KH15200.
view full answer...
Go To Results