Expert Answers about Toyota Camry
- Availability of Base Plates and Tow Bar Adapter for Flat-Towing 2000 Toyota Camry LE
- For your 2000 Toyorta Camry LE we offer the EZ Series Base Plate # 521157-1 which is confirmed to fit your 4-cylinder LE.
We do offer adapters to allow different brands of base plates and tow bars to be used together, but if you do not already own the Blue Ox Alpha Tow Bar # BX7380 you might want to consider using a Roadmaster tow bar to avoid the need for using an adapter, part # RM-033, which is both an additional expense and an additional connection point in your flat towing system....
view full answer... - Do Tire Chains that Fit Size 195/75-14 also Fit 195/75R14
- The tire sizes you listed are essentially the same. The R in your tire size just means that it has a radial construction.
The V-bar chains part # TC1840 that you mentioned do fit your tire size and would do an excellent job in heavy snow and ice.
If you needed something that offered a bit better fender well clearance you would want the Titan chains part # TC1530 which also fit. These will install a bit quicker as well and are priced great.
view full answer... - Is A 2 Inch Trailer Hitch Available For A 2009 Toyota Camry
- On the 2009 Toyota Camry, all of the hitches available are Class II 1-1/4 inch hitch openings. The hitches will have a 3,500 lb. Gross Towing Weight and a 300 lb. or 350 lb. Tongue Weight.
There is not a 2 inch hitch available for your vehicle, because a 2 inch hitch has to be rated as a Class III and a Class IV hitch. That means that the vehicle would have to be able to tow weights ranging from 3,500 lbs. to 12,000 lbs. The frame on your Toyota Camry would not be able to handle towing...
view full answer... - Hitch and Cargo Carrier for 2018 Toyota Camry Hybrid
- We do have a hitch to fit your 2018 Toyota Camry Hybrid, the 1-1/4-inch Curt Class I hitch # C11576. The Curt hitch # C11576 installs without drilling using the included hardware pack. The instructions are linked for reference along with a helpful article with tips for an easier install. I also attached an installation video for you to check out.
For a wiring harness I recommend kit # 118763 for its simple plug-in installation and because Tekonsha products are proven to be very reliable....
view full answer... - Adapter for 1-1/4 Inch Hitch Receiver for use with 2 Inch Hitch Mounted Accessories
- We do have the Trailer Hitch Adapter # e93YR. This will fit into a 1-1/4" receiver and allow you to fit a 2" hitch accessory. It will give you a 5" rise and you will need to reduce your receiver's tongue weight capacity by 50% when using this adapter. You cannot use this in a towing application.
view full answer... - Recommended Trailer Hitch For 2008 Toyota Camry SE V6
- Yes, we do have a hitch that will fit your 2008 Toyota Camry SE V6, but the item you selected, Curt Trailer Hitch, part # 12343, will not fit the SE model of the Camry. I would recommend the Draw-Tite Trailer Hitch Receiver, part # 36416, which is a Class II 1-1/4 Inch Hitch.
To complete your towing setup you may be interested in the following:
Draw-Tite Ball Mount, part # 36071
1-7/8 Inch Hitch Ball, part # 19256
2 Inch Hitch Ball, part # 19258
Pin and Clip, part # PC2
T-One Vehicle Wiring...
view full answer... - Trailer Hitch Recommended for 2005 Toyota Camry
- We do indeed offer a Class II hitch for your 2005 Toyota Camry. I'd recommend the US made Curt # C12339.
If you'll be using the hitch for light duty towing, you'll need a trailer wiring harness like # 118308, a # 36065 ball mount and # 19256 for a 1-7/8 inch trailer ball or # 19258 for a 2 inch ball.
I've linked to installation videos for the hitch and the wiring harness.
view full answer... - Trailer Hitch for 2011 Toyota Camry XLE Non-Hybrid
- For the 2011 Toyota Camry non-hybrid version we offer a 1-1/4-inch Class II hitches from several manufacturers and you can see all on the linked page. I recommend the Curt # C12343 because it costs less than the other options and because it requires no drilling for installation. An installation video and the written instructions are linked for you. The only special tool required to install the hitch is a torque wrench like # ALL944001.
If you also need a 4-pole trailer wiring harness for...
view full answer... - Availability of 2 Trailer Hitch Receiver for a 2008 Toyota Camry
- We have a trailer hitch that fits your 2008 Toyota Camry but unfortunately it is only a 1-1/4" trailer hitch that is available for your vehicle. I recommend going with the Draw-Tite # 36416 because it has a hidden receiver and fits all models of the 2008 Camry.
Attached is an installation video but if you can let me know what you will be using the hitch for I can make additional recommendations as necessary.
view full answer... - Trailer Hitch for 2014 Toyota Camry for Scooter Carrier
- The problem is most mobility scooters and the carriers for them will weigh too much for the hitches that would fit your Camry. Also most carriers that would have a ramp don't fit the smaller 1-1/4 inch hitch size.
For your 2014 Toyota Camry we have the Draw Tite hitch part # 36540 which has a 300 lb tongue weight capacity, you'd have to find a carrier and scooter that weighs less than that.
view full answer... - Availability of 2-Inch Hitch for 2011 Toyota Camry Non-Hybrid SE
- We offer one hitch for your 2011 Toyota Camry Non-Hybrid SE, part # 36416 from Draw-Tite. This is a Class II hitch with a 1-1/4-inch receiver opening. No 2-inch hitches are offered for your 2011 Camry. This is because hitch makers base their hitch sizes and weight capacities on the structural strength of the vehicle's frame, where the hitch mounts. In the case of your 2011 Camry the frame structure is strong enough to handle the load of a Class II hitch, but not the load typical of a 2-inch...
view full answer... - Available Class II Hitch Cargo Carriers for 1-1/4-Inch Hitches
- The hitch cargo carriers made for 1-1/4-inch Class I and Class II hitch receivers will usually not be the folding type. The reason is that any folding/hinge mechanism will introduce a point of weakness in the carrier's structure, as compared to a fixed carrier without a hinge. When you are already starting off with the smaller 1-1/4-inch shank, adding more potential for weak spots deters carrier makers from trying to make a folding hitch cargo carrier for these hitches.
The best I can...
view full answer... - Available Snowboard Carriers for Vortex Aero Crossbars of Rhino-Rack 2500-Series Roof Rack
- We have a wide range of roof-mount ski/snowboard carriers that will fit perfectly on the Rhino-Rack 2500-Series Vortex Aero roof rack.
The Rhino-Rack 2500-Series aero roof rack for your 2012 Toyota Camry 4-door sedan is made of parts # RRVA118B-2, # RRRLKVA and # DK321. This rack features lightweight aluminum crossbars that cannot ever rust and that leave more of your roof's weight capacity available for your cargo load.
On this rack you can use any of the aero-bar-compatible snowboard/ski...
view full answer... - Available Trailer Hitch Class for 2008 Toyota Camry for Using Hitch Bike Rack
- The custom-fit hitches that are made for vehicles like your 2008 Camry are designed around each car's own capacities. When a car only has 1-1/4-inch hitches made for it this means the vehicle frame simply does not offer enough strength to make a 2-inch Class III hitch usable. For your car only 1-1/4-inch Class II hitches are offered. All are shown on the linked page. Of the options available, I suggest the Curt # C12343 because it offers no-drill installation. An install video is linked....
view full answer...
Go To Results