Expert Answers about Mazda
- Trailer Hitch Availability for 2010 Mazda 5
- Both trailer hitches that we offer for your 2010 Mazda 5 are Class I hitches with a 1-1/4 inch receiver, but an adapter can be used to install a 2 inch hitch accessory. Between the two options I would go with the Draw-Title Sportframe Traile Hitch Receiver # 24773 as it has a slightly easier install process. I have linked an installation video for you to check out.
If you need to adapt this 1-1/4 inch receiver to a 2 inch receiver, I recommend the Brophy Adapter 1-1/4 inch to 2 inch #...
view full answer... - Class I Trailer Hitch for 2017 Mazda 6
- We offer the light-duty Class I hitch for your 2017 Mazda 6, the USA-made Curt # C11356. Both share the same no-drill installation with included hardware, and you can see the whole installation in the video I linked for you.
For a 4-pole wiring harness you can use # 118587, for a ball mount # C45016 and for a hitch ball part # A-82 for a 2-inch ball or # A-80 for a 1-7/8-inch.
Be sure to check your Mazda owner's manual before towing.
view full answer... - Thule Roof Rack Recommendation for a 2014 Mazda 6
- There is a Thule roof rack available for your 2014 Mazda 6. All of the part numbers you referenced are the correct components needed have a complete Thule Aeroblade roof rack on your vehicle as long as you have a 4 door with a naked roof.
I confirmed this with Thule.
view full answer... - Availability Of A Trailer Hitch For A 2008 Mazda 3
- The # e63AR hitch that google showed you is not for a 2008 Mazda 3. That hitch is for a 2011-current Mitsubishi RVR or Outlander Sport.
We carry only one hitch for the 2008 Mazda 3 with the Draw-Tite Class 1 Hitch # 24816. This has the smaller 1-1/4" receiver opening. I am sorry to say that there is no 2 inch receiver available for a 2008 Mazda 3.
view full answer... - What is Difference Between Malone MicroSport and EcoLight Trailers
- The big difference between the two trailers is the EcoLight trailers like part # MAL43FR were made to be lighter weight for smaller vehicles and have lower weight capacities. This weighs 145 lbs and has a 400 lb capacity whereas the MicroSport # MPG461KB weighs 240 lbs and has an 800 lb capacity. So it comes down to what you are looking to carry and your tow vehicle which would make most sense to go with.
view full answer... - Recommended Trailer Hitch for 2015 Mazda Miata MX-5
- We do offer a Curt Class I hitch for your 2015 Mazda Miata MX-5 as long as it does not have the appearance package. It also fits the Miata with the power retractable hardtop. Curt hitch # C11028 features a 1-1/4-inch receiver opening and installs using included hardware. A bit of drilling and fascia trimming is required.
I have linked an install video as well as a helpful article to illustrate the installation process.
If you plan to use the hitch for a bike rack you can use one of the...
view full answer... - 2" Trailer Hitch Receiver and 4-Way Wiring For a 2022 Mazda CX-30
- Yes, we have the Draw-Tite Trailer Hitch Receiver # DT44YR which fits your 2022 Mazda CX-30. This has the 2" receiver opening you are looking for and is rated for up to 300lbs of tongue weight and a towing weight up to 2,000lbs. Be sure to check with your Mazda dealer for your exact weight capacities on your CX-30.
I recommend installing the T-One Vehicle Wiring Harness # TK67FR when you install the receiver. This will allow you to control the lights on small trailers you may tow and...
view full answer... - Availability of Trailer Wiring Harness for 2015 Mazda CX-5
- There is indeed a plug and play trailer wiring harness option for your 2015 Mazda CX-5. I'd recommend the Tekonsha # 118563. The harness would plug inline with the vehicle's taillight wiring harness where it plugs into the back of the taillight assembly.
I've linked you to install instructions and videos for the hitch and trailer wiring harness.
view full answer... - How To Wire 6-Way Square Connector on 2000 Viking Popup to 2001 Mazda Tribute With 4-Way Flat
- I do have a few solutions to wire your 2000 Viking with 6-way Square to your 2001 Mazda Tribute 4-Way flat.
The first option would be to cut off the 6-way connector on your Viking Popup Camper, and wire in a 4-way connector by function. You will want to use Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design. part # HM48110. To wire, you will want to wire the labeled color wire on part # HM48110 to the matching wires on your trailer.
Another option would be...
view full answer... - Trailer Wiring for 2022 Mazda CX-5
- The T-One Vehicle that you mentions is not for the 2022 model year Mazda CX-5. The correct wiring harness for the '22 CX-5 is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C45FV.
view full answer... - New Sink to Fit 28" x 16" Cutout in RV
- The closest thing that we have to what you are looking for is part # 277-000089. This has overall dimensions of 29-1/4" x 18-1/2" but the minimum cutout dimensions are 26-1/2" x 16" so your cutout should work just fine. This lacks the 3 hole cutout for a faucet that you mentioned, but we have plenty of other options here on our site.
I think a stainless steel faucet would look best with this sink so if that's what you're shooting for and you want to keep the amount of extra holes you...
view full answer... - Recommended Stabilizing Straps for Bike Rack on the Curt Hitch, # 11338, on a 2008 Mazda 5
- The straps you are referring to are the Curt Bike Rack Strap, part # 18050, for the Curt Class I 1-1/4 inch Hitch, part # 11338. These straps are required by Curt on their Class I and Class II 1-1/4 inch hitches for any non-trailer load, like a bike rack.
The Curt Bike Rack Strap, # 18050, will attach to the bike rack and the other end to the trunk lip or window on your 2008 Mazda 5. It gives added support and stability to the bike rack and keeps the movement of the bike rack to a minimum....
view full answer... - Are Replacement QuickAccess Interface Top T-Track Strips Available Individually
- The Replacement QuickAccess Interface Top T-Track Strip # 1500052989 is only available as a pair. Unfortunately, Thule won't sell a single strip so this is the only option.
view full answer... - Recommended Rhino Rack Crossbar Size for 2015 Mazda CX-5
- I have a solution for you, but there is not a 47" long Rhino Rack bar available. However, the Rhino Rack Roof Rack Kit using parts # RRVA118B-2 (crossbars), # RRRLKVA (towers) and # DK289 (foot pack) uses 46" long bars, so it would be fairly close and is designed to fit on the naked roof of a 2015 Mazda CX-5. The next longest bar size is 49" long with part # RRVA126B-2, which could also be used on the above mentioned towers and foot pack.
I've linked a review video of this roof rack setup...
view full answer... - Are Replacement Yakima Q Towers Available
- If you're referring to the Yakima Q Tower then a replacement can be purchased with part # Y8880047. If you're referring to something else please send me a picture and I'd be happy to search for the correct replacement.
view full answer... - Durable Replacement Faucet Knobs
- We do have several replacement faucet knobs that will fit, similar to the one you mentioned part # PF284006 . All of the faucets knobs we carry are plastic, so replacement knobs will have the same strength and durability. So if you are not wanting to deal with broken knobs, the best option is to replace the faucet.
The design of the dual handle faucets make it easier to be over tightened and wear down over time. The single handle design has less chance of being over tightened from normal...
view full answer... - Availability of Custom-Fit Towing Mirrors for 2004 Mazda B Series Pickup
- We can offer you a custom-fit towing mirror set from Longview for your 2004 Mazda B Series Pickup. Part # CTM2200A includes driver- and passenger-side slide-on mirrors that will fit the mirror shape shown in the linked photo. These will not fit if yours have a light in the housing under the mirror.
If you do not have compatible OEM mirrors on your truck we can still help you with towing mirrors. We offer universal-fit clip-on, door-mount and fender-mount types.
For a pair of universal...
view full answer... - Blue Ox Rangefinder II to Roadmaster Base Plate Adapter for a 1999 Mazda Miata
- What you will need to use your Blue Ox Rangefinder II with Roadmaster Base Plates, # 711-2, is the Blue Ox Rangefinder II to Roadmaster Bracket Adapter, # RM-037. This adapter will attach to the Roadmaster base plates and then to your Rangefinder tow bar to tow your 1999 Mazda Miata.
view full answer... - Tire Chains for a 2008 Mazda 6 with 215/50-17 Size Tires
- We actually do have several snow tire chain options for your 2008 Mazda 6 and 215/50-17 tires. I have included a link to the available options below. On the product page for each of the chains, you can scroll down near the end of the page to see a list of tire sizes the chains will fit to verify whether or not your tire size is represented.
It is also a good idea to follow the specifications in the owners manual for your vehicle. If it states tire chains are not to be used, there could...
view full answer... - Availability of Trailer Hitch for 2023 Mazda CX-30
- For your 2023 Mazda CX-30 we have the Curt # C49CR. This is a Class I hitch with a 1-1/4" receiver. It has a tongue weight capacity of 200 lbs which should be plenty for your bike rack. You will need to make sure your bike rack is Class I compatible like the # TH934XTR before using it with the hitch.
view full answer...
Go To Results