We do have some generator adapter cords rated for 50 amps:
Cord # A10-G30450VP is a 50 amp female to 30 amp male twist lock
Cord # A10-50X30Y is a Y-Cord with a 50 amp male plug and two 30 amp female plugs
Cord # CAM55412 is a 125 volt 30 amp twist lock male and 50 amp female view full answer...
Currently the Draw-Tite Max-Frame Trailer Hitch Receiver # DT85GR is the only receiver we carry for your 2022 Kia EV6. Once Draw-Tite, Stealth or EcoHitch creates a hidden receiver and releases it to us we will add it to our website under the vehicle fit guide.
We do have the T-One Vehicle Wiring Harness # TK65VR which will attach to the tail lights on your Kia to give you a 4-way flat connector. view full answer...
According to Rhino Rack, their available roof rack for your 2017 Sportage that uses the # RRSX023 roof rack feet isn't rated for a roof top tent.
The good news is that Yakima has a rack that would work. The rack would consist of the following parts:
50 Inch CoreBars, part # Y00421
RidgeLine Towers, part # Y00145
RidgeClip fit clips, part # Y06021
The rack would have a 600 lb static capacity (while the vehicle isn't in motion) which would be perfect for a roof mounted tent. view full answer...
Yes, we do offer a trailer hitch that will fit your 2023 Kia Sorento PHEV. I recommend the Curt class 3 hitch # C34ER. This hitch has a 2" reciever so it will be perfect for your Kuat NV bike rack (great choice of rack by the way. I have one too!). The hitch has been confirmed to fit all models of the 2023 Sorento, including the PHEV models.
I have linked our install video below if you want to take a look. view full answer...
We have the EcoHitch Hidden Trailer Hitch Receiver item # 306-X7326 that fits your 2015 Kia Soul and has a 2" receiver so that you can utilize your steel Swagman bike rack like item # S63381.
Not only does this trailer hitch have the 2" receiver that you're looking for, but it also features a hidden crosstube so that the only thing you can see is the receiver itself. I have attached some photos and a video of this installed on a '17 Kia Soul for you to check out.
Please note that all... view full answer...
I may have a solution for you, but there is not a chrome/black combo running board for the 2020 Kia Sorento EX. However, the AeroTread Running Boards w/ Custom Installation Kit - 5" Wide - Aluminum - Polished Stainless # AA2051028 are a polished chrome running board with black treads that would fit on your Sorento. These are the only running boards currently available for your Sorento EX, but they're a really nice solution.
I've linked a review video of these on a similar Sorento for... view full answer...
I may have a solution for you, but the AirLift 1000 # AL61730 are not a confirmed fit on the 2012 Kia Sorento and there are not any suspension enhancements available for your vehicle. Additionally, these types of systems don't work to "lift" your vehicle and much as they reduce the sag when you connect a trailer; the good news is that there are other ways you can help fight off the sag you might be getting when towing.
I recommend using a weight distribution hitch, which is designed to... view full answer...
When it comes to replacing the low beam bulbs on your 2013 Kia Optima, one option is the Putco PURE High-Performance H11B Ion Spark White Halogen Bulbs, # P230011BSW. The bright white light offers a subtle blue tint for a custom look and is designed to improve visibility.
For your fog lamps, one option would be to go with the Putco Optic 360 High Power LED Fog Lamp Bulbs # P250008WW. These bulbs have a 1-year warranty and are designed with the high color temperature to improve visibility... view full answer...
I spoke with my representative at Tow Ready, who tells me that because the Forte Koup is not often used as a tow vehicle, a plug-and-play trailer wiring harness like the # 118431 you mentioned is not offered.
For your Forte Koup, a universal fit hardwired harness like the # 119178KIT is recommended.
The 118431 fits the 2007-2010 Kia Rondo or the 2010-2012 Kia Soul, but not your Forte Koup. view full answer...
The Ignik black travel case unfortunately isn't sold separately at this time so you would have to purchase both the tank and case with part # GN74FR. view full answer...
We do not have an extra/replacement coax port for the SmartPlug RV TV/Internet Inlet # SM88VR, nor do we have a plastic version with 2 coax ports. However, if you already have the SmartPlug RV TV/Internet Inlet # SM58FR, you can remove one of the coax ports and switch it to the plastic SmartPlug.
I will also say that the SmartPlug RV TV/Internet Inlet # SM58FR only weighs just over a pound, so it would not be too heavy for an RV sidewall. view full answer...
If your vehicle has the factory tow package then you can use the Tow Package Wiring Harness with 4 Pole Trailer Connector, item # C56332, which will simply plug into the connector on the passenger side frame rail (see instructions).
I would recommend checking the connector with a circuit tester, item # 3808 if needed, before purchasing to be sure that all of the wiring functions are present in the connector you mentioned on your frame rail. If the vehicle is not equipped with the tow package... view full answer...
The Reese Mini 350 Weight Distribution for Fleetwood/Coleman trailers you referred to, part # RP66041 has been discontinued and is no longer available.
For trailers with lower tongue weights under 400 lbs, Reese recommends their Light Duty Weight Distribution System w/ Sway Control, part # 66557. The frame brackets would need to mount on the trailer frame between 25 and 32 inches rearward of the center of the trailer ball, as shown in the diagram I provided. If your trailer frame is clear... view full answer...
If you have a variety of older Yakima products that you want to mount to crossbars that are 2-1/2" wide x 3/4" tall then the Universal MightyMounts # Y03590 would be your best bet. These adapters fit a wide variety of Yakima products but they are somewhat specific. If you can let me know what products you are wanting to mount them on I can see about verifying if these will fit or what other parts you may need. view full answer...
We do indeed offer a hitch for the 2016 Kia Forte Hatchback (A/K/A Kia Forte5). You'll need part # C11395. If you'll be doing some light duty towing with the hitch, you'll also need the # C39KR trailer wiring harness, a # C45521 ball mount, a # PC2 hitch pin and a # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball. view full answer...
Yes, the T-One Vehicle Wiring Harness # 118749 has been confirmed to work on your 2022 Kia Niro EV. This will give you a 4-way flat connector for use on most small trailers, and will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessory that impairs the view of your tail lights.
The Draw-Tite Trailer Hitch Receiver # 36600 is the class II receiver we have that is also confirmed to fit your Niro. Draw-Tite recommends using the Ball Mount # 36071 with either a... view full answer...
If your 2014 Kia Sorento SX V6 has the factory tow package you can use custom-fit plug in wiring harness # C56332 from Curt. This harness installs without having to cut or splice wires on your new Sorento. Since your hitch includes a mounting point for the 4-pole trailer connector you might want to add on the mounting bracket # 18144.
If you do not have the factory tow package you'll instead use the hard-wire harness # C56256 from Curt. This wiring kit will require you to do a bit of splicing... view full answer...
There is a T-One trailer wiring connector for the 2011 Kia Sportage. The T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118526, will fit a 2011 Kia Sportage.
I have included links to the installation details and videos showing typical installations. view full answer...
Your 2014 Kia Optima has only light-duty Class I hitches offered for it, such as the Curt # C11025. All can be seen on the link provided. Each one shares the same 200-lb tongue weight capacity and each can carry up to 2 bikes on a hitch-mount rack. Please note that my research did not confirm any official rated towing capacity for the 2014 Optima sedan; your owner's manual should be consulted before towing any trailer.
The reason only Class I hitches are offered for your Optima, and for... view full answer...
The ballmount, pin and clip are packaged with the hitch and the installation hardware and we cannot separate them. Curt includes them, because on Class I and II hitches, only certain ball mounts should be used.
If you do not want a hitch with the draw bar and pin and clip, I would suggest Draw-Tite part # 24839.
Yes, you can use a load carrier or a cargo carrier on either of these hitches, so long as the cargo carrier is designed for use with 1-1/4 inch Class I hitches. The tongue weight... view full answer...
Go To Results