If your 2017 Hyundai Santa Fe Sport with panoramic glass roof has an otherwise normal (bare) roof with no rails or fixtures you can use the Thule WingBar Evo roof rack made of parts # TH711400, # TH710501 and # TH145059. view full answer...
All available floor and cargo area mats offered for your 2014 Hyundai Santa Fe Sport can be seen on the link provided. Most of these are the carpeted type, but we also offer custom-fit thermoplastic mats from Weather Tech, such as the item you referenced, part # WT40556, which is a black cargo area mat.
You can use the filters in the left-hand margin to narrow the product results to those with the characteristics you prefer. Pricing for these products is indicated on each product page. view full answer...
For your 2017 Hyundai Santa Fe Sport, I recommend the Curt Class III Trailer Hitch w/ 2 Inch Receiver, # C13152, and the Draw-Tite Class II Trailer Hitch w/ 1-1/4 Inch Receiver, # 36536, which is confirmed to fit your 2017 Santa Fe Sport.
Unfortunately, this hitch was not designed to be "concealed" once installed on the vehicle. The cross tube will be visible on the underside of the vehicle's bumper. Unfortunately, we do not have a concealed hitch to fit your Santa Fe.
This hitch is a... view full answer...
With Wheel Lock Set for 1/2" Wheel Bolts # RG01-150 you get 2 locks and 1 key. There isn't an option for multiple wheel locks that use the same key for this product. view full answer...
We have wheel and tires in the size and rating that you need of 5.30-12 Load Range C like the part # AM30820 which is mounted on a 5 lug bolt pattern wheel or the part # AM30790 that is mounted on a 4 bolt wheel. view full answer...
The only suspension enhancement confirmed to fit your 2017 Hyundai Santa Fe Limited is the Coil SumoSprings Custom Helper Springs # CSS-1145R. These provide support to the coil springs on your vehicle. For air springs like the # F4155 you looked at, you may be able to use an Air Lift 1000 Universal Air Spring Kit like # AL60920.
Finding the correct kit will require taking some measurements. First, unload your vehicle to make sure it's at normal ride height. Then, measure the inside height... view full answer...
Since your 2010 Hyundai Santa Fe has a factory 4-Way trailer wiring connector, it will be pretty simple to install a working 4-Way and 7-Way combination connector. We offer a kit, # ETBC7, that has this style of connector. You will need to hardwire the remaining wires that will supply power for trailer brakes, 12 volt power for trailer lighting or maintaining trailer battery charge, and reverse light signal.
We have detailed instructions, see link, that show how to connect these wires,... view full answer...
If you check out the review I attached you will see the Curt cargo carrier part # C18151 being demoed on a 2014 Hyundai Santa Fe just like yours. It will sit 14 inches off the ground at the back of the carrier. And adds 38-1/2 inches to the back of the vehicle.
It would work well for you and have clearance to fold up but you would need to be careful in steep elevation changes so that it doesn't drag. view full answer...
Currently our etrailer Trailer Hitch Receiver # e28AR and the Curt # C34ER are the only options for your 2023 Hyundai Santa Fe Hybrid. Both these are Class III receivers which you can use a Reducer # e63YR with to allow for any 1-1/4" class I or II accessories you may have. view full answer...
The best E-bike rack for your 2016 Hyundai Santa Fe is the Thule EasyFold XT part # TH903202 because of how well it secures the bikes, how easy it can attach to the typically unusual frame styles of E-bikes, and because it's much easier to load due to the included ramp.
You'll want a trailer hitch installed on your Santa Fe first. For that the hitch I recommend is the Draw Tite part # 75776 which has plenty of towing capacity and won't require a stabilizer strap like the Curt hitches... view full answer...
You would need Thule Podium Foot Pack for Rapid Aero Bars, part # TH460R, as well as a Thule Fit Kit for Podium Style Foot Pack, # THKIT3024, to use the Thule Aero bars you have on your 2010 Hyundai Santa Fe.
These products will install onto the flush rails of your Santa Fe and allow you to run the Aero Bars that you have as cross bars. view full answer...
We carry beam trailer axles up to the 3500-lb rating and with the dimensions most commonly used on recreational trailers. Dexter idler axle kit # 35545I-EZ-89, for example, is a 3500-lb-rated EZ-Lube axle with 74-inch spring centers and an 89-inch hub face dimension. Axle diameter is 2-3/8-inches and spindle size is indeed 1-1/16-inch.
The same axle with spindles but without hubs is part # T3584F-EZ-8974.
The linked article on trailer suspensions includes a table of common axle dimensions... view full answer...
In the 2019 Hyundai Santa Fe Ultimate without the tow package you can use Curt universal hardwire 4-pole kit # C59236. I confirmed compatibility with my tech contact at Curt. At the present time (March 2019) this is the only hardwire option confirmed for the vehicle.
Please refer to the linked review and installation videos for more details on operation and installation. view full answer...
I do have a possible solution for you, but unfortunately the 2017 and 2018 Hyundai Santa Fe models were designed in a way that does not allow for any kind of suspension enhancement or air bags. If you're looking to reduce sag while towing, I recommend using a weight distribution hitch.
In order to choose the correct weight distribution hitch you will need to know the loaded tongue weight of your trailer. This also includes the weight of anything behind the rear axle in your tow vehicle.... view full answer...
Yes, take a look at Fulton Single Axle Trailer Fender with Top and Side Steps # F008593. The fender is 9 inches wide, 12 inches tall and 40 inches long. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets.
I have included a video review of this fender for you to check out. view full answer...
I have a different option for you, but the etrailer Trailer Hitch # e98841 you were looking at is only designed to fit the sport models of the 2017 Hyundai Santa Fe.
Since your 2017 Hyundai Santa Fe is a Limited AWD model then I recommend going with the Curt # C13153 which will be a confirmed fit and is very similar in design to the # e98841 you were looking at. This hitch is a fantastic option for carrying a bike rack, cargo carrier, or ball mount to tow a trailer, and you know you are... view full answer...
I do have a possible solution for you, but unfortunately there are no rear suspension enhancement options for your 2017 Hyundai Santa Fe. I spoke with my contact at Firestone (who have been the only ones with a fit for previous years) and he said that they do not have a fit for a 2017.
Instead what I recommend doing is using a Weight Distribution (WD) system. I check the online version of the owner's manual for your Santa Fe and I didnt see anything that prohibits the use of one, so as... view full answer...
I have a solution for you, but there are not any suspension enhancement systems available for your 2018 Hyundai Sante Fe. Instead, I recommend looking into a weight distribution hitch which is the recommended method for leveling your vehicle and trailer. A weight distribution hitch takes the weight of the trailer off the rear axle of the vehicle and applies it more evenly throughout the entire vehicle and trailer. This results in less rear sag on the tow vehicle along with improved handling... view full answer...
If the plan is to do any towing and there is a 2 inch hitch available that's the way to go. So for your 2017 Hyundai Santa Fe Sport the Curt hitch part # C13152 would be a great option and the best recommendation we can make.
For trailer wiring you'd then want the part # 118571.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop.... view full answer...
We have exactly what you need with the Curt T-Connector # CU94FR. This plugs right into the connector for the factory trailer tow package on your 2020 Hyundai Santa Fe and provides you with a 4-Way flat connector for basic trailer wiring. I have attached an installation video of this kit on a '19 Santa Fe that you can reference.
If you don't already have a trailer hitch, then I recommend the Draw-Tite # 75908 because it has a mounting bracket welded onto the crosstube which pairs nicely... view full answer...
Go To Results