I ran out the our warehouse, and pulled one of the Fulton Snap-Ring Swivel Marine Jacks, part # FTJ12000101 off the shelf. The caster does indeed swivel. The caster is welded to the interior pipe portion of the jack, which is free to swivel. view full answer...
For your 2007 Monaco Diplomat the correct replacement cover for the Voyager side camera is Replacement Chrome Cover for Voyager Right Side Camera with LED Low Light Assist # SIDHSG50CM.
It's designed to work with the chrome Voyager RV side cameras # VCMS50LCM and # VCMS50RCM.
It also come in white # SIDHSG50WT and is designed to work with # VCMS50LWT and # VCMS50RWT view full answer...
I recommend using the CIPA Rearview Boat Mirror - Convex Glass - Windshield Mount # CM11119 because it has a smaller mirror face than a lot of the other available and comparable mirrors since it is 8" long by 2-1/2" wide. This mirror will mount on round or square tube windshield frames 7/8" and smaller.
I've linked our review video of this mirror as well as a picture that shows this mirror in use by one of our happy customers. I've also linked our entire selection of boat mirrors in the... view full answer...
We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof.
These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2.
There are... view full answer...
Yes, you can use the etrailer # e98848 which is a Class III hitch with a 2" receiver. I would recommend this over the Class II option with a 1-1/4" receiver. The 2" receiver will give you more options for bike racks like the # BA22B, and the price difference is negligible. This has a bolt-on installation and will require trimming of the fascia. The hands-free liftgate functionality may be limited or lost if you have it following the installation, which is true for any hitch.
I have attached... view full answer...
While we do have the option of using the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY84FR with trike adapter # HRTRK-ADP. This will only accommodate the trike. It will not allow for a second bicycle to be loaded and it does not have a load ramp option.
The best option we will have that meets your needs of carrying an Electric Trike, an adult size cruiser style bike and have loading ramp option will be the Detail K2 Mighty Multi Utility Trailer at 6' Long, # K2MMT4X6. view full answer...
The InfiniteRule # 34061071-D hitch lock isn't available keyed alike, but we do offer a stainless steel locking hitch pin with the same 2-5/8 inch inside span dimension that is. I'd recommend the etrailer brand # e98882. On the linked product description page, simply choose '2' as the quantity and choose 'keyed alike' from the drop down menu, and you'll receive 2 keyed alike hitch locks.
I've linked you to a product demonstration video. view full answer...
Yes, we do have the second row and rear cargo area mats for your 2013 Honda CR-V. If your CR-V is the EX-L model then the front ones you have selected, # WT444021, will fit. If it is not an EX-L version then you will need # WT447371.
The second row liners are the same for both EX-L models and non-EX-L models, # WT444022.
And for the cargo area you can use # WT40524 for EX-L and non-EX-L models. I have linked a couple of review videos for some of these mats for you to view. view full answer...
I attached a picture that has a diagram of where all of the wires of the 4 way to 7-way adapter part # 30717 run when installing it.
Basically the blue wire goes to the brake output circuit of the controller, the black to the positive post of your vehicle battery, white to ground, and the yellow to the reverse light circuit. view full answer...
The SportRack roof rack # SR1003 uses square bars like those found in a Thule roof rack. You will want the fairing to about the same length as the distance between the legs that hold the crossbars. The 44 inch model would probably work, # TH82WV. Or, if a longer one is needed, # TH22WV, is 52 inches long. However, the SportRack bars are a little smaller than the Thule bars so it will not be the best fit. view full answer...
Any bike rack will require some degree of lifting to seat the bike within the carrier. A hitch mounted platform type rack is definitely the right choice when being concerned about lifting height; especially if you already have a hitch installed on your 2019 Honda Cr-v. This style will require lifting the bike to less height. I suggest the hule Helium Platform XT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount Item # TH53GC. At 43 lbs this carrier is itself a little lighter... view full answer...
The Curt Mfg. Class III trailer hitch, # C13119, does not have a bracket welded to the cross tube for installation of a trailer wiring holder bracket, like part # 18144.
You could install the # 18144 bracket on the hitch cross tube easily with the No Drill Mount Bracket, # 18140. We have a video showing this installation that I linked for you to see.
For a hitch with a trailer wiring tab welded to it you could use the Draw-Tite Class III hitch, # 75742, which is the correct application... view full answer...
You would need to use a small extension to allow the Blue Ox Avail part # BX7420 to fold up when not in use. For that the part # BX88265 would be perfect. It can provide up 6-3/4" or 8-3/4" of extension and would work well as it is intended for use with tow bars. view full answer...
Yes. The Thule Fit Kit for Podium Style Foot Packs # THKIT3050 is fit for the tracks on your 2002 Honda CR-V and can be used to mount the Thule Podium (discontinued-formerly TH460) or Thule Rapid Podium # TH460R feet. If you also need crossbars for this rack, you can use the Thule WingBar Evo Crossbars # TH711420 to complete your roof rack. These are the most aerodynamic crossbars offered by Thule and will do a great job of eliminating most wind noise associated with roof racks. The WingBar... view full answer...
If the tow hook on your rear bumper is still present on your 2017 Honda CR-V the Draw Tite hitch part # 76128 will still fit. It attaches to the side frame rails and then the tow hook. If the section removed was not the tow hook you'd be good. view full answer...
We do carry the base plates for your 2006 Honda CRV that will work with the Roadmaster Sterling All-Terrain Non-Binding Towbar with 6 Wire Electrical, item # RM-576. Does your CRV have a brushguard or front bumper extra trim package? view full answer...
We offer the Hollywood Racks Sport Rider Trike Carrier, part # HR1000Z-R-TRKADP, that can carry a single three wheeler, or a delta or tadpole style recumbent bike.
This carrier fits a Class II (1-1/4") or III (2") hitch and features an easy-to-use clamping system, padded hooks and adjustable wheel mounts to hold a maximum track width of 36" and wheel base (length) of 74". The carrier is also foldable, allowing for access to the rear of your vehicle.
I also recommend adding a Hitch... view full answer...
We can help with a way to activate the taillights of your 2012 Honda CR-V when it's being flat towed but the supplemental braking kits like the InvisiBrake part # RM-8700 are not designed provide that function.
What you would need for that is the # RM-152-98146-7 which comes with everything needed to control the taillights of the CR-V with you tow vehicle. view full answer...
We have the WeatherTech for your 2024 Honda CR-V available in Black or Gray.
Black
Front # WT59CQ
2nd Row # WT74CQ
Rear # WT66TQ
Gray
Front # WT24NQ
2nd Row # WT74NQ
Rear # WT94NQ view full answer...
A trim panel remover tool is not included with trailer wiring harness # 118561. We have # PT73HJ which is a basic design set of several tools that would come in handy. view full answer...
Go To Results