For dependable deep traction I would choose the Pewag # PWE2228SC tire chains featuring all square chain links for an excellent bite into the road, and cam buckles for easy tightening. These will install pretty fast using the drive-on method. view full answer...
Can you follow this link and tell me which grille guard you have?
https://www.etrailer.com/gguard-2006_GMC_Sierra.htm?style=&furl=-pm-Westin view full answer...
For your 2004 GMC Sierra 2500 with 6-1/2-foot bed we do have a dual-receiver hitch option from TorkLift, part # TLC1204, which has two 2-inch receiver openings. This allows use of a hitch-mount carrier, such as a bike rack, while towing. The Sierra's factory hitch needs to be removed to install the TorkLift. TorkLift makes the only dual hitch we currently offer for your truck and as you noted it features excellent build quality including reinforced pin holes.
Another option is to install... view full answer...
Can you tell me who manufactured your bed rails? In order to maintain a known weight capacity, it is highly recommended that the bed rails you use and the frame mounting brackets be from the same manufacturer. If you use different manufacturers, you'll find yourself in a situation where the bed rails and frame brackets have not been tested together and the weight capacity might be reduced from what it should be.
Reese offers a frame bracket kit # RP50064. The bracket kit does not require... view full answer...
I have an option for you but unfortunately nerf bars and their parts are specific to the vehicle and the bars themselves. From the pictures you were able to provide me I can see that we do not have that brand of crossbar and therefore I am not going to have replacement parts for it. From the pictures I can see that your current pad has a 4 peg attachment. All of the 4 peg pads we have do not line up with the same measurements or peg pattern that yours has. You may be better off replacing... view full answer...
A Class III hitch like the Curt # 13322 is fully welded as one single unit before receiving its powder-coat anti-corrosive finish. The two frame mounting brackets are not offered as replacement parts for this or for any other hitches we offer for your truck. Just for reference I have linked you to our page for all trailer hitches that fit your 2005 GMC Sierra 1500. These include Class III, Class IV and Class V hitches from Curt, B&W and other makers.
You can remove the hitch from the truck... view full answer...
Yes, the custom Sidewinder wedge for the Reese Titan fifth wheel trailer hitch # RP30867 you referenced is # RP30865. You will bolt onto your Sidewinder to prevent the king pin from rotating in your fifth wheel trailer. view full answer...
I spoke with my contact at Bulldog and he said that he has heard of people using the landing gear motor part # 75391 with the Bulldog jacks part # BD500162 that you referenced. But since they have not fully tested this they can't guarantee it will work just fine.
However, we had a customer come back and leave a review saying they used this motor with this jack set and it worked well. My contact at Bulldog said that this jack set was originally designed for a trailer manufacturer that was... view full answer...
I spoke with my contact at Firestone and he stated that the Firestone Ride-Rite Air Helper Springs - Rear Kit, # F2430, is the kit that will fit your 2010 GMC Sierra 1500 4x4. I have included a link to the installation details below. view full answer...
All of the electric drum brake assemblies we offer in the 10 x 2-1/4-inch size that are suitable for 3500-lb axles have mounting bolts installed. We do offer separate brake mounting bolts in a 7/16-inch size with 20 threads-per-inch, part # 7-75. We also offer washers # 5-8 and nuts # 6-17. view full answer...
I reccomend the Curt # C57WR Universal Truck Bed Exender which will fit nearly all full size pickup trucks including Chevrolet, GMC, Ford, Dodge, Ram, and Nissan, with standard 60" wide tail gates. (6.5 foot and longer beds) and provide 26-1/2 inches of additional bed length for storage and hauling. May not work with flare-style tailgates. Compatible with most tonneau covers.
I would check your tail gate measurements before ordering. view full answer...
We carry many types of towing adapters for goose neck and 5th wheel hitches and trailers.
Some of these adapters install in the goose neck ball hole, such as Curt X5 5th-Wheel Base Rail Adapter Plate # C16220 that fits their EZr Double Lock gooseneck hitch. This adapter provides the equivalent of base rails for any industry-standard 5th wheel hitch.
Other adapters install on the ball itself, like the Demco Recon # DM8550045, which is a complete 5th wheel hitch, not just a rail adapter.
You... view full answer...
We actually have two different fifth wheel tailgates that will work with your 2008 Sierra.
If you would prefer the more traditional all-metal construction, the Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design, # VGM-07-100 would be a great option for you. At the higher end of the price spectrum, we offer the plastic composite Stromberg-Carlson 4000 Series, part # VGM-07-4000.
The # VG-100 you mentioned is for a Ford truck, and would not work on your GMC.
If you would... view full answer...
We do offer a Westin HDX Grille Guard for your 2008 GMC Sierra 2500. You'd need part # 57-2335. Installation hardware is included. If you'd like to see what other accessories are available for your truck, simply click the provided link. view full answer...
I have a solution that'd get you the ball mount length you're needing. First, you'd need to use a reducer, part # C45405 to convert your 2-1/2 inch receiver down to a 2 inch. Then, you'd use a ball mount like the # BH20 from CR Brophy. The # BH20 offers a 2 inch drop (we don't have anything in a 3 inch drop) and a hitch pin hole to ball mounting hole distance of 13-1/4 inches. For a 2 inch ball, you'd use part # A-90.
As long as you have the trailer ball within 1 to 1-1/2 inches of level,... view full answer...
Yes. Reese has created and released a similar product for your 2011 GMC Sierra 3500HD. Take a look at the Elite Series Under-Bed Gooseneck Complete Hitch, # RP30158-68. This is the same set up, designed instead of GM trucks and it will work with the M5 series 5th wheel trailer hitches like # RP30922. view full answer...
The K-Source Custom Extendable Towing Mirrors (1 Pair), # KS62075-76GE, have the electric feature to move the mirrors, and the driver's heated. These features will work only if your original mirrors also had these features. It will not add features that you did have before. I have included a review video of these mirrors for you to check out. view full answer...
We do not have a kit that has both the front and rear Timbren Suspension enhancement systems included. But we do have Timbren kits that are confirmed as a fit for both the front and rear for your 2006 GMC 1500 HD 4-wheel drive.
I have provided a link to the Timbren suspension enhancement kits that are confirmed as a fit for your truck. The Timbren kit that you referenced # TGMRCK25S is intended to be use as a rear suspension of your truck. I have provided a link to these being installed... view full answer...
Yes. For black side steps you would need Carr Custom-Fit Side Steps - Super Hoop - Black Powder Coated Aluminum, # CARR124031. I have included a link to the installation instructions for you. view full answer...
Yes, we do offer a stand-alone slider assembly that will work with your Pro Series 20K hitch. The part number you need is # RP30092 and its written instructions are linked for you at right, along with an installation video.
This slider is a great way to improve low-speed turning clearance for short bed trucks like your 2003 GMC Sierra. It provides 10-inches of front-to-back travel and will fit any industry-standard base rails from Reese, Pro Series, Curt, Valley, Draw-Tite and Hidden-Hitch. view full answer...