Expert Answers about Chevrolet C/K Series Pickup

• Available 2-5/16-Inch Hitch Balls with 2-Inch Diameter Shank
• We do have two 2-5/16-inch hitch balls that have a 2-inch diameter shank that is also 3-1/2-inches long; both appear on the linked page. B&W part # BWHB94009 that you referenced is one and the other is Curt item # C40088. Please note that both of these use a coarse thread, either 4-1/2 or 5 threads per inch; both also include a matching lock washer and nut. All balls in the 2-5/16-inch size appear on the linked page and some of these have fine threads but the two above are the only ones...
  view full answer...


• What Ladder Racks are Available for a 1998 Chevrolet Silverado 1500 6 Foot Bed
• The Thule Ladder Rack, part # TH500XT, will fit your 1998 Chevrolet Silverado 1500 with 6 foot bed. We have other ladder racks that will fit your 1998 Chevrolet Silverado and I have linked to a page that has all of them below.
  view full answer...


• Replacement Wheels for 1966 Chevy C/K Series Pickup That Accept 10-1/8 Inch Hub Caps
• I may be able to provide a solution for you here, but we do not have any wheels that are 15" diameter and 5" wide; additionally since the wheels we carry are designed for use on trailers, almost all of them will not have an offset, so you will need to take that into consideration when choosing one for your truck. With that said, we do have wheels that are 15x6 in a 6 on 5.5" bolt pattern, which would require the use of a tire that is 205, 215 or 225 wide like the # AM10303 -but you will...
  view full answer...


• Is There a Brake Controller for a 1984 Chevrolet Custom Deluxe Camper
• Brake controllers are universal items and are not vehicle specific. Newer trucks will have brake controller ports to simplify wiring, but the brake controllers are the same. I have included a link to a page on general brake controller information and on wiring and installing brake controllers that should be very useful for you. Our most popular brake controller is the Tekonsha Prodigy P2, part # 90885. It sells so well because how of how easy it is to setup and how well it works.
  view full answer...


• Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00
• We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents. The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively. The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you want...
  view full answer...


• Availability of a Dual Hitch Receiver to fit a 1989 Chevrolet K10 Blazer
• I have a few different dual hitch extensions that you can choose from that will a 2 inch receiver hitch opening. The Malone Dual Hitch Extender, # MPG544, measures 12-3/8 inches from the center of the rear hitch pin hole to the end of the receiver. This hitch has two 2 inch receivers. The upper receiver is designed to carry a towing accessory and the bottom receiver will let you tow a trailer. Curt offers a Dual 2 Inch Receiver Tube, # D-192. This dual hitch extender will give you up...
  view full answer...


• Availability of a Trailer Hitch for a 1989 Chevrolet R3500 Cab and Chassis Truck with Dump Box
• According to my technical contact at Draw-Tite your 1989 Chevrolet R3500 cab-and-chassis with dump box has no direct-fit bolt on hitches available. However, there may be an option in a universal-fit weld on Class V hitch. Curt offers a universal-fit weld-on Class V hitch with 2-inch receiver opening an 3-inches of drop, part # 15901. This hitch fits truck frame widths between 18-inches and 43.88 inches. Installation requires welding on the side brackets to the main tube and welding the...
  view full answer...


• Is Curt Adjustable Ball Mount # C45900 Available with 1-7/8 Inch Trailer Ball
• Curt Channel Style Adjustable Ball Mount, part # C45900, is only available with 2 and 2-5/16 inch diameter trailer balls. Curt offers a different adjustable ball mount that can be used with all three ball sizes, part # D900. The ball mount is rated for 6000, 7500 or 10,000 lbs, depending on which ball is being used. Due to the adjustable rise or drop, this versatile ball mount would allow you to tow many different types of trailers.
  view full answer...


• Replacement Tarp for Extang Classic Platinum Series for 1992 Chevy C-1500
• The Replacement Extang Classic Platinum Tonneau Cover - 02-08 Dodge 1500, 03-09 2500/3500 6.5' Bed Item # EX6770 is only a fit on Dodge trucks, so that's not going to be the correct cover. To replace the Extang Classic Platinum Series for your 1992 Chevy C-1500 you'll want to use the # EX6540, which is the tarp replacement for your short bed C-1500.
  view full answer...


• Is Center Section of B&W Gooseneck Hitch BWGNRK1000 Available Separately
• B&W Gooseneck Hitch # BWGNRK1000 is confirmed to fit your long bed 1998 Chevrolet C/K Series Pickup. The center section of this complete hitch is available on its own as part # BWGNRC800.
  view full answer...


• Availability of Class V Hitch for 1997 Chevrolet C/K Series Pickup with 10-Inch Deep Drop Bumper
• We do offer a 2-inch Class V trailer hitch for your 1997 Chevrolet C/K Series Pickup with 10-Inch deep drop bumper. Curt hitch # C15317 offers a very substantial 2400-lb tongue weight capacity and a gross trailer weight rating as high as 17,000-lbs if used with weight distribution. If your truck carries a different weight rating then the lower-rated item becomes the overall limit. This hitch installs without drilling or welding using the included hardware. Your spare tire will need to...
  view full answer...


• Adapter to Convert 1986 Chevrolet Military Pickup 12-Pin Military Connector to 4-Pole or 7-Way
• We do not offer any wiring adapters to convert a 12-pin female connector on a military vehicle to a standard RV-style 7-way like # 37185 or a 4-pole like # 18252. But you can install a different type of trailer socket on the truck by hardwiring one. Based on the information I could find about your military connector the wires have letter codes on them and carry the following functions common on most trailers: J is the right turn signal B is left turn signal E is tail lights D is ground K...
  view full answer...


• Fifth Wheel Hitch Install Kit for 1984 Chevy Pick Up
• To install your Husky fifth wheel hitch on your 1984 Chevy, you would need the Reese Universal 5th wheel install bracket/rail kit, part # RP30035. If you do not have a trailer connector installed in the bed of your truck, you can use # 20023. I have linked you to an install video showing the 20023 being installed on a later-model Silverado. The procedure for your truck will be very similar. Unfortunately, due to the age of your vehicle, I do not have any video footage of a fifth wheel...
  view full answer...


• Available Trailer Hitch Receivers for 1995 Chevrolet K250 4x4 Pickup
• I have included a link to all of the available trailer hitch receivers that have been confirmed to fit the 1995 Chevrolet Pickup with a standard or step bumper. One of our most popular hitch receivers is the Curt Class IV Trailer Hitch Receiver, # C14081. I have included a short installation video for you. The Curt Trailer Hitch Receiver, # 13028, that you mentioned will fit a 1995 Chevy Cab & Chassis Pickup with 34 inch frame but not the standard pickup.
  view full answer...


• Is Spare Tire Repositioner Available for the Curt Trailer Hitch # 13942 on a 1989 Chevy C/K Pickup
• We do not carry a aftermarket spare tire repositioner that you may need to use when installing the Curt Trailer Hitch Receiver # 13942 on your 1989 Chevy C/K Pickup.
  view full answer...


• Recommended 5/8" Thick Locking Hitch Pins With A 4" Span
• For a 4" span the Roadmaster Hitch Lock for 2" Hitches # RM-316 you were looking at is going to the be the best option since it comes with two locks that keyed alike.
  view full answer...


• How to Determine which Transmission Line is Return Line
• The best way to determine which line on a transmission cooler is the return line from the radiator is to use the following procedure: 1. Start engine while engine is cold 2. Place transmission shift lever in drive for no more than 10 seconds 3. Place in Park, stop engine, and remove keys 4. Identify the oil return line by feeling both oil lines. The coolest line is the oil return line. On the aftermarket transmission cooler the ports are not input specific or output specific. It is not...
  view full answer...


• Shank and WD System Head Availability as Replacement Parts
• Sounds like you are in need of a weight distribution shank and head assembly. Without knowing what brand you have it would be hard for me to make the proper recommendations. Most shanks are universal though. They typically will have 3/4 inch diameter holes that are spaced 1-1/4 inches apart measured on center. I attached a page that has all of the shanks we offer as well as an FAQ article that details how to pick out the correct rise/drop ball mount for a setup. I also attached a link...
  view full answer...


• Availability of Amber and Red LED Clearance Light for Trailer Fender
• The closest lights we offer to the # BA44FNL and the # BA44FNR in LED is part # MCL12ARRB and # MCL12ARLB. I attached an install and review video for these lights for you to check out as well.
  view full answer...


• Universal towing Mirror For 1999 Chevrolet Hightop Explorer Conversion Van
• We do not have towing mirrors with the heat and power feature for your 1999 Hightop Explorer van. We have the universal towing mirrors like the K-Source Universal Towing Mirror, part # KS3891. This clips on the mirror you have and gives you a towing mirror surface that measures 7-3/4 inches tall and 5-1/8 inches wide.
  view full answer...