Hey Travis, so we have several different options for fifth wheel bracket options but since we can't recommend mixing brands between the bracket and rail kits I would need to know what brand rails you have to recommend a bracket kit.
If you had the very common Reese rails you'd need the bracket kit part # RP30439. view full answer...
Hey Larry, thanks for providing all that info. It sounds like you are on the right track here, because the Curt TruTrack 4P Trailer Mounted Weight Distribution System # C74RV is a great choice. This system is designed for trailers with a tongue weight between about 700 and 1,000 lbs. It stands to reason that your trailer will be within this range at all times, loaded or unloaded. This is a 4-point system so it will provide superior sway prevention and control.
The # C74RV does include... view full answer...
Hi Daniel,
I was able to Google the correct tail lights for your trailer and while we don't have a ramp, here is what you need for tail lights. I know you said right tail light, but 'll go ahead and list out both the driver and passenger side options in case you need both at some point.
- Passenger Side: LED Trailer Combination Tail Light # STL38RB
- Driver Side: LED Trailer Combination Tail Light # STL39RB view full answer...
Hi Jill,
The Yakima BaseClip you mentioned is not a fit for a 2018 Chevy Colorado, but we do have what you need. The correct part for your truck is the following:
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06110 view full answer...
Hello Noel. So, the TruXedo Lo Pro Cover for the 2004 Toyota Tundra is part # TX545101. According to TruXedo, this cover does use the # TX1117467 rear header plugs (yes that is the correct term).
My only concern is, like you said, this does not look exactly the same as the header plug in your picture. This makes me wonder if perhaps you have an older model of this cover that uses a different header plug.
Can you provide me with the model number of serial number of your TruXedo Lo Pro... view full answer...
Hi Steven,
Yes there is a grommet for the hole you are referring to on the Replacement Front Cover for Solera Power RV Awnings - Regal Drive Head # LC643922.
Per the manufacturer, what you need is the Replacement Manual Override Grommet for Solera Powered RV Awnings # LC95ED. view full answer...
According to the owners manual for your 2020 Chevy Equinox it appears you are going to be limited to a trailer weighing up to 1,000lbs when you do not have trailer brakes. I have included a snip image from your manual that shows most can only tow up to 1,500lbs with trailer brakes. If you have the 2.0L with the V92 provision then it can tow up to 3,505lbs with trailer brakes. As you only have a 4-way the 7-Way Kit # ETBC7 will provide you with the connector and wiring needed to step up... view full answer...
You need to use the Torflex Lift Kit # K71-707-02 since your 2020 Haulmark enclosed trailer has the tandem Dexter #10 Torflex axles. The Lippert Axle Riser Kit # LC382741 you found is only rated for Lippert's square torsion axles. While I do see the measurements are very close for the mounting holes(7-7/8" Lippert, 8" Dexter) each manufacturer does test their own parts for their products. So if an issue developed over time by using the different manufacturers parts they would not be covered... view full answer...
Yes, you can go with the 60" Yakima HD Crossbars # Y01157 rather than the 55" # Y01156 on your 2021 Honda CR-V with the flush mount roof. Here is a list of all the parts you would need to have the 60" HD crossbars.
Yakima HD Crossbars # Y01157
BaseLine Towers # Y28TR
HD Bar SL Adapter # Y03541
BaseClip Fit Kit # Y06188
BaseClip Fit Kit # Y06189
If you choose the 60" JetStream crossbars you would need the following parts.
Yakima JetStream Crossbars # Y00426
BaseLine Towers # Y28TR
BaseClip... view full answer...
Hello again, Dave. It is possible to mount the Yakima Ladder Roller # Y01163 upside down. We would not want the weight of the kayak on the roller during transport, but since you are using it just to load onto the J carriers it will be just fine. view full answer...
Unfortunately William, I have no way to look at exactly what parts are installed on your Karavan KHD-2000-60-8-RR utility trailer. Based on images I could find it does look like the Incandescent Tail Light # ST56RS you found. If you can take some images of your light or of the good light on the drivers side along with measurements of the light I can use that to verify if this is the correct tail light for your trailer. view full answer...
While the Blue Ox SwayPro Weight Distribution # BXW1000 is going to be one of our lightest systems at 91lbs I don't think this is really what you are going to want to use. The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV is going to be easier for you to put on and take off. The hitch head is separate from the drop shank which means while the overall system is heavier at 124lbs the separate parts will make it easier for you to put on and take off. The Curt is rated... view full answer...
Hey Jacob,
The Curt Trailer Hitch Receiver # C11488 has mounting holes spaced from center to center 37" x 3-3/8". If you have any other questions or need help finding the correct hitch for your vehicle then just let me know the year/make/model and I'd be happy to help. view full answer...
Thanks for reaching out, Bruce!
The Convert-A-Ball Interchangeable Ball Set # 902B comes with the 2-1/4" standard shank length so it's the kit you're looking for. The XL kit, part # 105TB, comes with a 3" shank length just or reference.
Then to wrap up the rest of the parts you asked about you'll need the Storage Case # 004B and the Cover # 005B. view full answer...
You only need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 if your Crosstrek does not already have a 4 pole at the back. If you already have a 4 pole, then you'll just need # ETBC7 and you'll be set. view full answer...
Yes, the Curt Spyder Goooseneck/Fifth Wheel Adapter part # 16085 does come with the needed pins to secure it to your fifth wheel rails. view full answer...
The Firestone air bag kit part # F2550 that you have installed on your 2008 Ford F-350 was designed to fit with in-bed rail kits like the Curt # C16448-204 that you want to install so they two will fit well together and would not require any special install steps. view full answer...
The Clearsource Ultra RV Water Filter System # CS87FR really is designed for "weekend warriors" such as yourself, who would only be using it occasionally, and are not living in the camper full time. It is very easy to set up and take down, and it is pretty lightweight, at least as far as water filtration systems go.
We do not recommend leaving it full when in storage though. What you will want to do is remove the filters and blow out the system with pressurized air (do not exceed 30 PSI).... view full answer...
The drill adapter cannot be used with the Dutton Lainson winch part # DL15850 as the part # DL6456 only works with the DLB style of Dutton Lainson winches like the part # DL16331. view full answer...