Expert Answers about Kia E-Track

• E-Track and Parts Needed For Securing Motorcycles In a Enclosed Trailer
• Yes, you can place the etrailer Horizontal E-Track # e25VR across your trailer from side to side. This will allow you to use the CargoSmart Motorcycle Wheel Chock # 3481731 making it easier and safer to secure your bikes in your trailer. Be sure to use the etrailer E-Track Backing Plates w/ Hardware # e46RR to secure each of the 5' tracks in place. Each of these kits includes 3 brackets for each track. I recommend using the Erickson E-Track Tie Down Rings # 59131 and Cam Tie-Downs # EM05729...
  view full answer...


• How To Install E-Track Inside Of A Isuzu Refrigerated Truck
• Hey Shawn, The E-track you're wanting to install in the back of your truck is just going to need to be screwed into the studs of the walls or into the floor. You'll want some self tapping screws ( # SL99FR) or wood screws ( # SL49FR) that are just thin enough to pass through the mounting holes of the E-track # e62VR and just long enough to bite into the studs without passing completely through them. The more screws the better the hold so you can load up each hole, even if some holes are...
  view full answer...


• Does it Matter Which Side of the Brophy Stop Plate ETHSB the Load is Placed On?
• Yes, it does matter. If you put a load on the opposite side of the Brophy Stop Plate for E Track item # ETHSB it will bend.
  view full answer...


• How Long are the Tracks of the CargoSmart X-Track Cargo Organizer Pro Bundle
• Hey Frank, each of the tracks that come with the CargoSmart X-Track Cargo Organizer Pro Bundle - Matte Black - Steel - 667 lbs - 5foot Long # 3481788-P are 5 foot long. How to install it will depend on the application. Wood screws through studs would be a great way that would be very strong. Otherwise we do have a backing plate that would work great with the part # e89RR.
  view full answer...


• Are There Landing Pads Available To Mount Yakima Q-Towers To An A.R.E. Truck Topper
• I reached out to Yakima and was informed that there unfortunately is not a compatible landing pad for Q-Towers available so the only way to mount your Yakima crossbars would be to also get new towers. You would also need some tracks to mount on the roof of your A.R.E. Truck Topper to have something for the towers to mount to. We have the following track sizes available: 42" # Y01126 54" # Y01127 60" # Y01135 Since you have Q-Towers I'm assuming you have round bars and would need four...
  view full answer...


• Do You Have Tracks Which Can Be Fitted To a Hard Top For Adding Cross Bars?
• It sounds like you are looking for a set of tracks like the Yakima 60" Tracks # Y01135 these are available in different lengths so if you are looking for a specific length please let me know. Also if you know the width of the crossbars you are needing I can help you find the correct crossbars and towers to mount on the tracks. Sembra che tu stia cercando un set di binari come i binari Yakima da 60" # Y01135, questi sono disponibili in diverse lunghezze, quindi se stai cercando una lunghezza...
  view full answer...


• Aero Cross Bar Solution To Fit Into Utili-Track Bed System On 2022 Nissan Frontier
• The Inno Truck Bed Cargo Rack # INRT102-65 you found is going to be the only rack we have that sits as low for your 2022 Nissan Frontier. For an Aero bar like the Rhino Rack # RR56VH these are going to sit much higher on the bed.
  view full answer...


• Cushioned Equalizer Recommendation for 2017 Jayco Whitehawk 27DSRL with Wide Track Equalizers
• Hey Clarence, so we do have a cushioned equalizer solution that fits your wide track tandem axle setup like with the equa flex part # LC314336 but we don't have a Dexter EZ Flex that fits this size. We also have a MORryde part # MR34AR which would be my first choice as I prefer the way these rotate to provide the cushioning and MORryde just has a really good reputation in terms of performance and quality.
  view full answer...


• Dexter E-Z Flex Suspension Kit For a 2017 Grand Design 303 RLS 5TH Wheel Camper
• I have now way to verify which stock equalizer your 2017 Grand Design 303 RLS came with so you are going to need to measure the bolt hole separation on camper to find the correct Dexter E-Z Flex Suspension Kit. We have the Kit # K71-652-00 which is 5-3/4" from front hole to rear hole on center or the Kit # K71-653-00 which is 7-3/4" from front to rear hole on center. You will need to select the kit closest to your factory measurement. I do recommend using the Grease # L11390 with a Grease...
  view full answer...


• Availability Of Replacement U-Bolts For An Old Reese Sway Bar
• Hello Howard. I am afraid we do not have a U-bolt that will fit those parameters. If you knew exactly what model of Reese sway bar you have, that may help to narrow it down. Have you tried reaching out directly to Reese? They may be able to help point you in the right direction. It can be difficult tracking down replacement parts for older sway bars though. If parts are no longer available, I would have to recommend getting a whole new sway bar. If you can tell me the year, make and model...
  view full answer...


• Questions About Adding A Thule Wheel Tray To A Yakima Bike Rack Ramp To Help With Loading Bikes
• Hello Gregg thank you for your questions. Firstly I will start by telling you that all three of the replacement wheel trays you mentioned, the # 853-7020-56-02, # 853-5423-56 and # 853-7628 are all made of aluminum. Thule describes it as a lightweight single-wall aluminum. All three of these trays are made as replacement parts for some of the older Thule model bike racks, all of which have been discontinued for quite some time. The only real difference between the trays is the length and...
  view full answer...


• Recommended Trunk Mounted Bike Rack Compatible with 2019 Forester Sport with Spoiler
• Saris does not confirm the Bones 2 bike track as a fit for your vehicle. The best rack I can confirm as a fit is the Hollywood Racks Over-the-Top 2 bike # HRF2 or 3 bike # HRF2-3. Hollywood Racks does confirm this fit and this rack is designed to give you the best trunk mounted bike rack for a spoiler like on your 2019 Subaru Forester Sport. This rack is adjustable to fit your vehicle perfectly. If you have step-thru frames, I recommend using a bike adapter bar like # 64005 to give...
  view full answer...


• Availability Of Digital Door Lock System For A 2019 Thor Ace
• I am sorry to say that we do not carry a door lock system that will fit those parameters. The largest door lock we have is the Bauer Products European Style Motorhome Entry Lock # BA58AR which will fit a 7-7/16" tall x 3-3/4" wide cutout, and even then, it is not a digital lock. We do have a few electronic locks like the Global Link Ultra E Pro Electronic Lock # 295-000185 but this is made for a 3-3/4" tall x 2-3/4" wide cutout, so it will be much too small for this application. Do...
  view full answer...


• Recommended Weight Distribution Hitch and Brake Controller For 2017 GMC Acadia Factory Tow Package
• Your 2017 GMC Acadia Denali with the factory V92 towing package is rated to tow a trailer up to 4,000lbs. This information is directly out of the owners manual for your Acadia. I do recommend using a weight distribution hitch like the Fastway e2 Weight Distribution # FA92-00-0450 with a larger trailer. This system will help to ensure that your Acadia rides level and you do not experience light steering from to much weight on the rear axle and that the trailer tracks straight with the inclusion...
  view full answer...


• Where Should I Mount D-Ring Tie Down Points In Relation To The Front And Rear Of The Tire?
• Hey Dwayne that is a great question. Generally, we would want the tie down points to be in line with the front and rear of the tire. So the # EM58522 straps would hang straight down and connect to the # RR05 D-ring. You can also angle them forward if needed. It really depends on the trailer, the tire and how much space you have to work with. There really is no rule of thumb for how far away the tie down point can be, so if you have to go a foot away from the tire you definitely can. I...
  view full answer...


• Solution For Carrying A Finn Golf Scooter On A 2018 Audi Q5
• Hello Jason, I just looked up those Finn Golf Scooters those things are pretty sweet. We do have a potential solution for carrying a Finn Golf Scooter, but there are no Thule products I am aware of that will work for this. Your best option for this is to use a hitch mounted carrier for a motorcycle or dirt bike. What I recommend doing is installing the Stealth Hitches Class 4 Hitch # 391AUDQ518 which will give you a 2" receiver capable of carrying 600 lbs of tongue weight. You can then...
  view full answer...


• All Parts Needed to Flat Tow 2014 Chevy Silverado 1500 Behind Motorhome
• Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit: etrailer Classic Base Plate Kit # e98959 - Tow Bar: etrailer XHD Non-Binding Tow Bar # e94ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Roadmaster Battery Disconnect # RM-766 - Supplemental Braking System:...
  view full answer...


• Base Plates For 2014 Honda Pilot For Flat Towing
• Hey Robert, We do have a tow bar base plate for your 2014 Honda Pilot, as well as the rest of parts needed to flat tow it: - Base Plate Kit: Blue Ox Base Plate Kit # BX2251 - Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox and Curt Base Plates # e47ZR - Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 - Supplemental Braking System: Brake Buddy Classic 3 Portable Flat Tow Brake System # HM39494 Blue Ox has a deserved reputation for the quality of...
  view full answer...


• Recommended Roof Rack For A 2018 Chevy Equinox Hauling A Kayak And Bike
• Hey William, If your 2018 Chevy Equinox has rails that run from front to back then I recommend the Yakima JetStream Crossbars # Y00425 and TimberLine Towers # Y33TR. If you have a naked roof then you'll need the following roof rack components: Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK488 To haul the kayak you can can clamp on a carrier like the Rhino-Rack...
  view full answer...


• Complete Towing Package For 2016 GMC Acadia Including 7-Way For Brake Controller
• Hi there Daniel; thanks for writing in and we can get your 2016 GMC Acadia set up with the complete towing package, including the 7-way, helper springs, and weight distribution hitch. I'll go ahead and list out the parts you need, as you're already on the right track with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528. - T-One Vehicle Wiring Harness - 7-Way Trailer Connector # 118271 - 7-Way Mounting Bracket # PK12711U - Redarc Tow-Pro Liberty Brake Controller # RED24FR - Plug-and-Play...
  view full answer...