Hi Alvin,
You'll need to disconnect the 4-pole trailer connector that you have installed and replace it with the T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118266. This kit includes everything you'll need for a functioning 7-way, including some relays that you'll need to install in order to get power to the 7-way. It won't come with a mounting bracket so I recommend picking up the no-drill bracket # 18136 and mounting it to the trailer hitch.
From there you'll need to... view full answer...
Well thanks so much for those kind words, and we can help you out here. Since you have a 450 lb loaded tongue weight, the Blue Ox TrackPro # BLU47FR would indeed be rated too highly, but you can actually just substitute a 2-5/16" hitch ball for the 2" hitch ball that comes with the Blue Ox TrackPro Weight Distribution # BLU36FR.
TheTrackPro # BLU36FR is rated properly for your tongue weight, and all you'd nee to do is replace its 2" hitch ball with one that has a 1-1/4" diameter shank,... view full answer...
In order to find out a jack for your Jayco, you're going to need to know what your trailer's tongue weight is and pick a jack that can support that weight rating.
Since your Jayco has a GVWR of 3,950 lbs (and tongue weight is 10-15% of the GVWR), that puts your range at 395-592 lbs tongue weight roughly. If you actually know your tongue weight that would be the best case, but since we don't at the moment this'll work too.
So with that said, the Stromberg Carlson Electric A-Frame Tongue... view full answer...
Kent, I'm assuming you're talking about a trailer wiring harness, in which we do have the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector # HM11143690 which will work great with your 2015 Pathfinder.
This harness will plug directly into your factory wiring and won't require any cutting or splicing. view full answer...
There aren't any plug-in adapters for your 2023 Nissan Pathfinder unfortunately, so you'd have to use the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR that comes with the brake controller.
You could also use the Curt Echo Wireless Brake Controller # C51180 which plugs into a 7 way trailer outlet, which I'm assuming you have since you have the factory tow package. But, if you don't have one you're going to need to add one with # ETBC7 if you plan on using... view full answer...
Yes, we have both a hitch and 4-way connector confirmed to fit your 2022 Nissan Pathfinder. The hitch that I recommend is the Draw-Tite Max-Frame Trailer Hitch Receiver # DT67GR. This hitch has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
The wiring you need for the 4-way connector will be the Curt T-Connector # C95ZV.
To round out a... view full answer...
The Curt # 13088 will require absolutely no drilling to get installed on your 1996 Nissan Pathfinder. This will bolt right into factory weld nuts that are already in your frame, so it's a nice easy install.
With that being said, these weld nuts can get clogged up with debris over time, so you may need to clean them out before the install. This is pretty common and all you need to do is soak them with WD40 and then scrub them out with something like the Nylon Tube Brush # 814092. This is... view full answer...
If you have the OEM roof rack on your 2010 Nissan Pathfinder then the Thule ProRide XT # TH598004 will fit just fine. This would be the same case even with the older 598003 version of the ProRide.
Your problem may be that you only have the raised side rails and you don't have the crossbars on your Pathfinder. If this is the case then you'll need crossbars to install this bike rack. I recommend going with the Rhino-Rack 46" Vortex Crossbars # RRVA118B-2 and SX Series Legs # RRSX006 which... view full answer...
Go To Results