Expert Answers about Ford Wheel Locks
- How To Lock Steering Wheel of Vehicle that is Towed on Tow Dolly
- Hey Dave great question. So some people will use the seat belt to lock the steering wheel. To do this wrap the seat belt around the steering wheel a few times and then buckle it and then pull the seat belt all the way out so that it's ratcheting and let it go and it will be locked to the steering wheel and hold it straight. You can pull on the steering wheel side of the seat belt to take out as much slack as possible so that it won't slip.
To undo this you would just unbuckle the seat belt.
view full answer... - Overall Extended Length of The Club 900 Steering Wheel Lock
- Overall, when fully extended from just the tip to the tip, the extended length is 27 inches for the The Club Vehicle Steering Wheel Lock # WI900YELLOW.
view full answer... - Will the Trimax Heavy Duty Adjustable Wheel Lock Stop an Angle Grinder?
- Oh it won't stand up well to an angle grinder at all. The Trimax Heavy Duty Adjustable Wheel Lock item # TMX42ZR is designed to stop the casual thief with bolt cutters. Not a dedicated criminal with power tools.
I am sorry but I do not have another option for you. We do not carry that heavy duty of a wheel lock.
view full answer... - Trouble Getting BOLT Spare Tire Lock # BLT66FR To Attach on 2024 Jeep Wrangler Willy's Edition
- The BOLT Spare Tire Lock # BLT66FR is the Bolt part number 7032301. This will fit onto a 1/2"-20 threaded stud. I have included images for the keys which work with this lock as well as the wheel hole requirement needed to fit inside the wheel. The problem may be your 2024 Willy's Edition has some wheels which may not be compatible with the lock.
view full answer... - Wheel Lock Solution for Trailer that Was Stolen that Had Demco Coupler
- That is a super frustrating story. There isn't really a great way to lock the Demco coupler part # DM14040-81 to a trailer but a better option might be a wheel lock like the part # 288-02020 which would at as a theft deterrant.
Somebody must have really planned out the theft of that trailer though as they had tools to remove the coupler and seemingly had the same coupler or drug it off by the safety chains.
view full answer... - Is There a Way To Get The Reese 5TH Wheel Locking Latch # 30416?
- Reese no longer manufacturers their part 30416. As this is a part specific to the Reese 5th wheel hitches there is not another option for replacing this. So you would either need to have one custom made by a steel shop in your area or look at a new hitch like the B&W Patriot Fixed # BWRVK3255 or Slider # BWRVK3270. I prefer B&W as they seem to not change over their 5th wheel hitches like Reese and B&W carries more replacement parts for their 5th wheels than most other companies.
view full answer... - Replacement Door Lock For A 2015 Palomino Sabre Fifth Wheel
- Hey William,
HF350 is just your key code so you'll need to remove the backing plate of the door lock in order to measure the cutout hole. Once we know the cutout hole dimensions we can look for a compatible fit to replace the current lock.
view full answer... - Troubleshooting Trailer Brake Assemblies Where One Wheel Locks Up Before Other
- Hey Charlie, typically this problem is related to the adjustment of the brake assemblies being different. Most likely one assembly has a tighter adjustment and is locking up before the other. I'd jack the trailer up so the wheels are off the ground and turn the wheels by hand. You should feel a light drag of the brakes on both wheels. If one has more resistance than the other that would be why.
To see how to manually adjust trailer brake assemblies check out the video I attached, fast-forward...
view full answer... - Lock Recommendation for Shadow Gooseneck Trailer that Doesn't have Coupler Lip
- For gooseneck trailers like yours where the coupler is not a standard that we have a lock for the best option is going to be a wheel lock like the etrailer part # 288-02020, Barb. This will for sure fit as a lock and would be just as effective so it would be the route I would recommend.
view full answer... - Can I Use Demco Hijacker With Reese Side Winder Pin Box
- If your Demco Hijacker is a fixed fifth wheel hitch you can certainly use it with the Sidewinder with the custom wedge for Hijacker fifth wheel hitches part # SWW-05.
If your Demco Hijacker is a slider hitch like part # DM8550034 then you will need to lock out the side winder. Since the Reese Side winder moves the pivot point of the towing setup back 22" you cannot have a pivot point at the pin box and the slider hitch without causing damage.
If you look under the rotating turret there...
view full answer... - Recommended Bike Rack For An Aventon Level.2 And Adventure.2 E-Bike
- Hey Paul,
There unfortunately isn't a bike rack that's going to meet all of your needs/wants at this weight capacity but I have a couple of options depending on a few factors:
Option 1: Hollywood Racks Sport Rider SE Bike Rack # HLY84FR. This rack has an 80lb per bike capacity, locking ratcheting hooks to secure the bikes by the frame, wheel hoops capable of handling tires up to 5" wide, 60" maximum wheel base, tilt-away function, and comes with a locking anti-rattle hitch pin. It does...
view full answer... - Will the AMPLock King Pin Lock Work With a Nylon Lube Plate
- Yes, the AMPLock King Pin Lock for 5th Wheel Trailers # AMP77FR will work with a nylon lube plate. The only reason this wouldn't work is if there was any adapters installed.
view full answer... - Options For Curt Slider 5th Wheel Hitch With Locking Handle Below The Top Of Hitch Head
- Hey Joel,
There is no replacement handle for your Curt Q25 # C16566 that does not stick up above the hitch, they all use the same handle, and it's the only one that fits.
You'll need to not use a tonneau cover with the hitch installed, or switch to a hitch like the Curt # C35DR which uses a handle that doesn't stick up above the head.
view full answer... - Should The Jaws Of A Reese 16K 5th Wheel Hitch Stay Latched Open When Uncoupling
- Hi William,
The jaws of the Reese 5th Wheel Trailer Hitch w/ Round Tube Slider # RP30075 should lock open when you pull the handle out. In the video I've attached below you can see Jeff lock the jaws open around the 3 minute mark. If your handle is no longer latching open then you'd likely be looking at replacing the head of the hitch with # RP30047A.
Typically you can't get replacement parts for 5th wheel hitch heads because the manufacturers don't want the liability of consumers adjusting...
view full answer... - Recommended 9/16"-18 Lock Nut for a Dexter Single Axle
- Rocky, I was not able to find a flange nut with that thread pitch but I was able to find the Replacement 9/16"-18 Lock Nut for Lippert Tandem Axle Lift Kit # LC44UD which could still work for you. This is a regular lock nut that has the 9/16"-18 thread pitch that you're looking for.
view full answer... - King Pin Coupler Lock For A 3" Diameter King Pin
- The Ultra-Fab 5th Wheel King Pin Lock # UF48-979008 might be just what you're looking for. It has a 3-1/4" diameter and uses a padlock to secure the king pin. If you could provide a picture and some dimensions on your king pin I'd be happy to take another look and see if there's something a bit more specific for your setup.
view full answer... - Recommended Bike Rack for Carrying E-Bikes on Keystone Cougar 5th Wheel
- For a bike rack that is rated for the back of a 5th wheel and can handle your electric bikes I recommend the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes # HLY64FR. This rack can handle tires up to 5" wide and has a capacity of 80 lbs per bike.
I looked through all of the available Lectric eBikes and none of their current models are over 80 lbs so it should work no matter what you have. Even the dual battery models are under 80. The padded clamps hold bikes by the frame or...
view full answer... - Can Companion Fifth Wheel Hitch be Used with Curt Turning Point Pin Box
- Hey Ryan, I hate to be the bearer of bad news but yeah the single connection point Companion hitches like what you have cannot be used with rotating pin boxes UNLESS you lock them out which turns them into a non-rotating pin box.
So if you have to run your current setup you'd need to lock out the Turning Point to use it with your Companion but you may not have great turning clearance unless the Companion you ordered was a slider.
view full answer... - Can CE Smith Spare Carrier Secure Promaster Wheel to Trailer
- We can't say for certain if it would work on a vehicle as it was designed for trailer applications.
view full answer... - Will The Demco Recon With Slider Work With A Curt Turning Point Pin Box
- The Demco Recon 5th Wheel Hitch w/ Slider # DM57YV has a sliding function so you would not want to use this in conjunction with the pivoting function of the Curt Turning Point. If you lock out the pin box by inserting the two bolts in the back and transition it back to a standard pin box then you could use the slider function on the # DM57YV.
The # DM57YV only gives you 14" of turning clearance, whereas the Curt Turning Point will give you 22" so I highly recommend not going with the...
view full answer...
Go To Results