Hi there Dakota; the Lock N Roll Articulating Trailer Coupler for 2" Receivers - Trailer Side # 336TS510 will use a hitch pin lock just like the vehicle coupler side. So it just requires a 5/8" pin lock like the InfiniteRule Hitch Lock # 34061072-D. view full answer...
I'm not entirely sure what kind of hitch you have on your Airstream Travel Trailer, but I'm assuming it's a 2" hitch so you could use the Master Lock Trailer Hitch Receiver Lock # 1479DAT. view full answer...
Hi Gary,
The Fastway Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - 3-5/8" Span # FA86-00-3160 unfortunately doesn't come with a keyed alike option. We do offer the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881, which has the same 3-5/8 span and can be keyed-alike. If you have a 3" hitch then we unfortunately only have keyed-unique options available. view full answer...
I recommend the Curt Trailer Hitch Receiver # C12118 on your 2015 Kia Cadenza. This hitch has a tongue weight rating of 350lbs and 3,500lb trailer rating. You will want to ensure that you do not exceed the weight ratings given by the manufacturer for your vehicle. This will not require you to change your rear shocks. If your suspension is sagging you should check that the weight on the trailer is distributed properly across the trailer and you do not have to much tongue weight. You typically... view full answer...
Hi Adam!
The Saris Freedom Bike Rack for 4 Bikes # SA4414B will only work with the Saris brand of locking hitch pin so the kit you're looking or is the 8' Cable Lock and Anti-Rattle Hitch Lock for Saris Hitch Mounted Bike Racks # SA984.
Since the Freedom does come with an anti-rattle hitch bolt already, you can potentially just use a longer cable lock like the 10' etrailer # e98891 and just wrap it in and around your bikes, the bike rack, and through the safety chain loop on your trailer... view full answer...
Great question Shaun, so hitch pins like the Master Lock part # 1481DAT are not weight rated because they don't ever really fully take on the weight of the trailer so it's not realistic to give a number. We've had our hitch manufacturers tell us the hitch would fail before the hitch pin would. view full answer...
Hi Ed,
Yes, the pin # C87ER included with the Curt QuickPin No-Latch Trailer Coupler for 2" Ball # C82CR is 1/2" diameter so you could use a locking hitch pin lock like the Curt # C23517. This locking hitch pin is 1/2" in diameter with a 2-13/16" span to fit the width of the coupler. view full answer...
A High-Low adapter like the one you looked at is only intended for flat towing, not towing a trailer. Regardless, I would not use a separate adapter with the Lock N Roll. Use of your typical adapter will reduce the capacity of the hitch by 50%. It also isn't the best idea to add in an additional part with the design of the system.
The best option is to get the Lock N Roll Articulating Hitch w/ 5-Position Channel # 336VS503515. This has a maximum rise/drop of 8-1/4" with 2" hole spacing... view full answer...
The Curt Slim Adjustable 2-Ball Channel Mount # C46KR uses a 5/8" pin and is 2" wide at the channel. For a lock I recommend using the etrailer Trailer Hitch Receiver Lock # e98880. This has a 5/8" pin diameter as well as a 2-5/8" span. If you don't already have a lock on the hitch you could order 2 and have them keyed alike. view full answer...
Hey DC, we do have a solution for that but you would need to order the part # 8820048 which is the body of the lock assembly without a core and then for the correct core part # Y8771-A132. view full answer...
The etrailer Threaded Anti-Rattle Hitch Pin Lock # e99047 is an M16 bolt while the bolt that comes with the Thule Snug Tite Hitch Lock # THSTL2 is an M12, so even if the thread count was the same they wouldn't be compatible.
If you're just needing to replace the bolt for your Thule bike rack then you can use part # TH62RE, otherwise if you need the lock and washers then you'll need the kit # THSTL2 instead. view full answer...
The Brophy 2" Stainless Steel Hitch Ball part # SC23-C will work out great with the Flash Self-Locking Aluminum Ball Mount part # DTLBM8600.
For an anti rattle for it use the Roadmaster Quiet Hitch for 2" Trailer Hitches part # RM-061 this is my go to anti rattle because it is very effective at keeping things secure. I've linked a video on it for you to check out. view full answer...
According to the owners manual for your 2020 Toyota Camry, "Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your vehicle is not designed for trailer towing or for the use of tow hitch mounted carriers."
With that said if you decide to go ahead and tow a trailer the Curt Trailer Hitch Receiver # C11576 is a class I receiver which is rated... view full answer...
It sounds like you are looking for the Replacement Lock Cylinder for BOLT Toolbox Latch # BL7023482 which can key to the double side cut style key on your 2019 Toyota Tundra. We also have the following BOLT locks which you can code to your key.
BOLT Trailer Hitch Receiver Lock # BL7023584
BOLT Trailer Coupler Lock # BL7032495
BOLT Covered Padlock # BL7023539
BOLT Coiled Cable Lock # BL7023721
BOLT Trailer Coupler Lock # BL7025289
BOLT Locking Recovery Hook # BLT97FR view full answer...
Hey Craig,
To secure your Kuat Beta Bike Rack for 2 Bikes # B202-2 to the trailer hitch receiver you'll need the Hitch Lock for Kuat Bike Racks # HL2. If you have the 1-1/4" shank Beta then you'll need the # HL1 instead. view full answer...
If the key won't turn at all it could be a stuck tumbler. I recommend getting some WD40 and spraying it into the key hole. Use the key to work the WD40 into the lock core inserting and removing the key several times. Eventually, hopefully the lock core will release and work again. Otherwise, the lock might be beyond saving and will need to be replaced. view full answer...
I do have an option for you as we currently only carry the 2" Shank # AM3422 and not the 2-1/2" shank 3422-25 for the Rapid Hitch Adjustable, Locking, Aluminum Ball Mount Kit # AM3400.
The Fastway Self-Locking, Adjustable 2-Ball Mount # DTALBM6825 has an aluminum shank and fits into a 2-1/2" receiver. It uses an integrated hitch lock so no receiver hitch pin is required. The same key is used to secure the adjustable ball mount to the 8" drop shank. view full answer...
Thank you Dean.
While we currently only offer the Diversi-Tech Combination Lock Set # DT35010KA5504 as the set and do not have a keyed alike 2nd coupler latch we do offer our etrailer Hitch Receiver and Coupler Lock Set # e99039 which you can have keyed alike by selecting the option from the drop down on the item page. Then you can add the 2nd Coupler Latch # e98884 and also select keyed alike from the menu. This will give you the 3 locks all keyed alike. view full answer...
I do have some options for you as the Draw-Tite Ball Mount Adjustable with Sway-Control Tab # 7390 is required to use the supplied 1/2" bolts.
The Shocker Hitch XR Adjustable Drop Hitch w/ Sway Control Tabs # SHK45VR is capable of using the InfiniteRule Locking Pins for Shocker Hitch Ball Mounts # IR39FR. The design of the Shocker Hitch is superior to the Draw-Tite so it is strong enough to be able to accept the locking pins. view full answer...
Go To Results