Lock for Curt Slim Adjustable 2-Ball Channel Mount

Question:

I have a curt 45935 flip ball hitch. Do you sell a locking pin for the ball side of this hitch?

asked by: Michael T

Expert Reply:

The Curt Slim Adjustable 2-Ball Channel Mount # C46KR uses a 5/8" pin and is 2" wide at the channel. For a lock I recommend using the etrailer Trailer Hitch Receiver Lock # e98880. This has a 5/8" pin diameter as well as a 2-5/8" span. If you don't already have a lock on the hitch you could order 2 and have them keyed alike.

expert reply by: Robin H

Michael T.

3/10/2024

Hi Robin H. The curt 45935 is not the slim hitch. It has a 3/4 diameter pin. I have contacted curt hitch support and they do not offer one yet. I was looking to see if any other manufactures offer a locking pin. Thank you .

Robin H.

3/10/2024

@MichaelT sorry about that. I didn't double check the part number since that was the ball mount you had looked at so that's on me. The 45935 is the # C99NR and although we don't have a lock specifically for this you could use the # 34065041 which has a 4-7/8" span and the 3/4" diameter you're looking for. This also has a keyed alike option if you want to replace both pins with the lock.