Expert Answers about Dodge Trailer Fenders

• Looking For Replacement Fenders For A 2021 EZ-Hauler Model EZEC820DL
• Hello Jon. Based on the pictures of these 21 EZ-Hauler Model EZEC820DL trailers I can see online, they appear to use a tandem axle teardrop style fender. Unfortunately, EZ-Hauler does not list any specs or info for the fenders online. Your best bet will be to measure the current fenders then try to find a match. For example, the Tandem Axle Teardrop Trailer Fenders # HP64VR are 9" wide, 68" long and 17" tall. Feel free to post the dimensions of your fenders in the comments below and I am...
  view full answer...


• Do the Fulton Trailer Fenders Fit the Left and Right Side?
• Yes, they do! The Fulton Single Axle Trailer Fender with Top and Side Steps item # F008584 you were looking at will fit both left and right sides. This fender is designed for 14" wheels. You will want to look at the dimensions of the plastic fenders, item # F008584, to determine if they fit your trailer because we have quite a few options. I have included a diagram below to show the measurements for you. I have also linked our entire selection of Fulton fenders because we have ones that...
  view full answer...


• Are There Interior Fender Protectors Available For A Boat Trailer
• Hey Stevie, We don't currently offer any kind of interior fender protector but we do offer bunk carpeting, like part # CE11349 that could be mounted to the fenders to prevent the boat from scratching against the metal fenders. We offer a few different sizes and colors, which I've attached a link to below.
  view full answer...


• Recommended Jeep Style Fenders that are 36" Long
• The closest fenders we have to the size you mentioned are listed below but they are only 10" wide: Single Axle Jeep Style Trailer Fender - Cold Rolled Steel item # HP76VR Single Axle Trailer Fender - Jeep Style - Aluminum Tread Plate item # CE18041ATB Both of these fenders measure 10" Wide x 36" long x 19-1/4" tall and fit 13" to 15" wheels.
  view full answer...


• Do You Have any Triple Axle Trailer Fenders in a Flare?
• The Tri-Axle Teardrop Trailer Fenders # HP37VR you found are our only fenders we carry for a triple axle trailer. We do not offer them in a flare.
  view full answer...


• Replacement Fender for 1998 Equiquest Horse Trailer
• Hey Reid, so the tandem axle trailer fender part # HP74VR is going to be your closest option and as long as you are okay with it being a little taller and longer it would fit and work great. There's no reason it wouldn't work though.
  view full answer...


• How to Tell if Replacement etrailer Fender Will Fit EZ-Loader Trailer
• Thanks for reaching out, Steve! The Replacement Single Axle Trailer Fender for White River Marine Trailers # HP53VR can potentially be used for your EZ-Loader trailer, but you'll need to compare the 31" long x 9" wide x 12-3/4" tall dimensions of this fender with the one on your trailer to ensure this will work as a replacement.
  view full answer...


• Looking For A Fender 8" To 9" Wide And 16" To 18" Long - What Are My Options?
• Hello Guy. That is a pretty small fender. We do have one potential option for you, but unfortunately, we do not have anything that will fit all of your parameters. The closest thing we offer is the CE Smith Single Axle Trailer Fender # CE17717. This fender measures 16-1/4" long and 7" wide. So not quite the 8" width you were looking for, but if you can make it work this will definitely be the closest option. Anything 8" wide or more will be much longer than you are needing. For example...
  view full answer...


• Replacement Fenders for Forest River R-Pod
• I am sorry Mike but we do not sell custom fit fenders for your Forest River R-Pod. The absolute closest thing I could offer would be the CE Smith Single Axle Trailer Fender item # CE17100ATB. It measures 10" Wide x 32" long x 16" tall and is made of 14-gauge aluminum. This has the standard diamond plate finish that it looks like your R-Pod came with from the pictures I can find online. You would get this fender mounted up using the Mounting Brackets for Trailer Fender item # CE26098G-2.
  view full answer...


• Fenders For a Single Axle Utility Trailer Switched To 225/75-17 Wheel and Tires
• For your size wheel and tire you will want 2 of the Fenders # HP49FR. This fender is 10-3/4" wide, 32" long and 15-1/4" tall.
  view full answer...


• Options For Increasing Fender Clearance On A Single Axle Trailer
• Hello Dan. Our rule of thumb is that you want at least 3" between the tire and the fender, and at least 1" between the inside of the tire and the frame of the trailer. If you need additional clearance there are ways to do this, but using longer spring shackles is not one of them. Generally, we do not recommend using larger tires if clearance is an issue, but since you already have them there are really two ways to go about this. The first way is to remove/relocate the fenders or replace...
  view full answer...


• Are Polished Steel Fenders For 15" To 16" Tires Available
• We unfortunately do not currently offer polished steel fenders in a 15" to 16" tire size, but we do offer standard steel fenders in this size with part # HP64VR.
  view full answer...


• Trailer Fender Recommendation for a 1999 Bayliner Capri Single Axle Trailer with 15 Inch Wheels
• The Fulton Plastic Fender, # F008585-2, is designed to fit on single axle trailers with 15 inch wheels, so it would be a good fit for you. To make sure the fender is the right size for your needs, take a look at the dimensions on the product page below the description to ensure proper fit. If you find you need something different, I have included a link to our fenders for 15 inch wheels for you.
  view full answer...


• Can I Put Larger Tires And Wheels On My Harbor Freight 1720 Trailer?
• Hello Michael, thanks for reaching out. It might be possible to upgrade the tires and wheels on your Harbor Freight trailer. This will completely depend on how much extra room you have in the wheel well/fender area. The 12x5.3 tires are about 5.6" wide and 21.9" in diameter. If we go up to the # LHAX097 ST175/80R13 tires they are 7" wide and 24" in diameter. Our rule of thumb is that you want at least 3" between the tire and the fender, and at least 1" between the inside of the tire...
  view full answer...


• Recommended 33" Steel Fender for Trailer
• Hey Vince, it looks like the closest I was able to find to what you're looking for was the CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel # CE17900G which measures 31-1/2" long x 9" wide x 13" tall, and the Replacement Single Axle Trailer Fender for Malibu Boats Trailers # HP33VR which measures 32" long x 9" wide x 15" tall. If you let can let me know specifically what trailer you're needing a replacement for, I'd be happy to check and see if we carry it.
  view full answer...


• Can Trailer Jeep Fender # HP76FR be Used on Trailer with 14 inch Wheels
• Hey Scott, the Jeep Fender part # HP76FR that you referenced will work great on your trailer that has 14 inch wheels. It would be a street legal solution too.
  view full answer...


• Availability Of Optronics Thinline LED Trailer Fender Light MCL67ARB
• Good morning Jeff, we have exactly what you are looking for. Take a look at the following: Optronics Thinline LED Trailer Fender Light w/ Bracket - Submersible - 10 Diodes - Amber/Red Lens # MCL67ARB
  view full answer...


• Replacement Fender for Harbor Freight 1915 Trailer
• The dimensions we need to find a replacement fender are the length, height, and width. For example, the Fulton # F008551 is 7.35" wide x 21-1/2" long x 6.5" tall. The # HP99VR which seems to match the style of many Harbor Freight trailers is 24" long x 8" wide x 8" tall. For a third option that is designed for 12" wheels we have the # CE17701G which is 23-1/2" long x 7" wide x 6-1/2" tall. I would compare these to your length, width and height to see if they come close. If not, I would...
  view full answer...


• Availability of 30" Long Galvanized Trailer Fender for 14" Wheels
• Hi Keith; the only fenders we carry with those dimensions are the stainless steel # HP98VR and the cold rolled steel # HP38VR. Unfortunately, a galvanized version is not available.
  view full answer...


• Does TRC Small Edge Trim Require Adhesive or Wire to Install
• Hey Bob, the Small Edge Trim part # 362ET4119-25 that you referenced comes ready to install and does not require additional wiring or adhesive. You'd be able to press it onto the fender as-is and it will stay on and work great.
  view full answer...