Hey Mike. Installation and fitment of the BedSlide Sliding Truck Bed Tray # BE36WR is based on the factory truck bed. Fitment can depend on the exact type of liner, but generally the liner will need to be removed in order to install a BedSlide Tray. view full answer...
To find if the BedSlide Sliding Truck Bed Tray w/ T-Tracks # BE39ER will fit you will need to measure. The tray is 48" wide so you will need at least that much space for it to fit. I would say 48-1/2" would be good just to give a little clearance on either side. view full answer...
Yes, the Lomax Hard Tonneau Cover # AB1010029 is compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-501. Both of these are designed to fit your 2019 Ford F-150 with a 6-1/2' bed. The Lomax cover installs inside the bed rails and the Thule TracRac installs on top of the bed rails so they won't interfere with each other.
The one thing you may run into is the uprights getting in the way of the panels when you fold the cover because they're angled in slightly.... view full answer...
Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack System # TX96NV in black if the color is more important to you than the rack itself. This rack allows you to also slide the rails but not as easily as on the Thule. view full answer...
Yes, the Brophy Slide In Camper Tie-Downs # HSAB will fit a dually. They simply require your truck to have at least 2" between its sidewall and lip of the bed rail, and you can't have a drop-in bed liner, aftermarket bed rails, double-walled bed, or side-step bed. view full answer...
Yes, it does! The Malone TradeSport Truck Bed Ladder Rack w/ Load Stops item # MAL55VR fits the 2024 Toyota Tacoma with either the 5' or 6' bed lengths. view full answer...
Hey Justin! There's only one ladder rack with a cantilever that fits your short bed 2015 GMC Sierra 1500 and is compatible with the BAK Revolver X2 Hard Tonneau Cover item # BAK39120. It is the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever item # TH43002XT-782EX.
The Thule item # TH43002XT-782EX has a sliding base that attaches to the stake-pockets on top of your Sierra's bed. This is what makes it compatible with your X2 cover. This ladder rack has a 1,250 lbs
capacity... view full answer...
Your 2015 Toyota Tundra with the 6-1/2' bed will require the Base Rails # TH21610 to attach the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT. view full answer...
Yes, there is and congrats on the new truck! For a hard folding tonneau cover that is ladder rack compatible, I recommend the BAKFlip MX4 Hard Tonneau Cover item # BAK78AV. This cover fits the 2024 GMC Canyon's with the 5' bed. This quad-fold cover sits inside your GMC Canyon's bed rails which means it is compatible with sliding ladder racks. It has a matte black finish and is made of 1/2" rustproof aluminum panels.
For a ladder rack, I recommend the Thule T-Rac Pro2 Truck Bed Ladder... view full answer...
Yes, the Curt A25 5th Wheel Trailer Hitch # C16180 will fit on your 2020 Chevrolet Silverado 3500 but it typically not recommended unless you have a pivoting pin box like the Reese Sidewinder # RP34FR since you have a short bed. First you will need Rail Kit # C16429-204 if your truck did not come with the factory in bed hitch prep or you will need the Adapter # C88KR if your truck does have the in bed mounting system.
Typically a short bed truck is recommended to have a sliding 5th wheel... view full answer...
The # HSWB is designed to fit Ford trucks. For your 2024 Ram 2500 you either need the # HSAB, # HSBP or # HSSF. All of these will fit the 6-1/2' bed and 8' bed with crew cab. The # HSAB is the only one compatible with the RamBox. view full answer...
No, it does not. The Malone TradeSport Truck Bed Ladder Rack item # MAL55VR only includes a set of load stops.
For a compatible carrier, I recommend the Malone SaddleUp Pro Kayak Roof Rack w/ Tie-Downs item # MPG110MD. The SaddleUp is perfect because it is a rear-loading carrier, so it will be much easier to get your kayak up on top than a side-loading saddle-style carrier. It has fabric covers for the rear saddles as well, which makes it simpler to slide your kayak into position.
I... view full answer...
For your 2006 GMC Sierra 1500 with a 6-1/2 foot bed we do have a snap on style tonneau cover that fits with the Truxedo TruXport # TX281101. This is the only snap on style cover we have fits your truck. view full answer...
Hey Michael,
I have three options for your 2022 Ram 2500 from you to choose from:
The first being the Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707. This is your standard contractor-style ladder rack that you've likely seen quite a bit of out on the road. It's nice solid rack that will get the job done, but is quite loud when driving at speeds over 45mph. I actually have one of these myself and used some gasket maker to fill in any spaces that could allow wind to pass through... view full answer...
Hey Ivan, thanks for reaching out!
The Brophy Slide In Camper Tie-Downs # HSAB are universal, so you'll have to reference the attached photo and compare that to your 2019 Ford F-150 bed sides for fitment. Unfortunately, this kit isn't something that we're able to add to our fitguide.
If they do fit your truck, then be sure to also pit up the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP so you have a complete setup! view full answer...
Hi Dennis,
The Access TonnoSport Soft, Roll-Up Tonneau Cover # A22010409 is a confirmed fit for your 2024 Ford F-250 (8' bed) and would sit inside the bedrails allowing you to use a stake pocket-mounted ladder rack, like the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-000. The rails of the rack may make it a bit harder to get your fingers in to fully press in the cover to the Velcro on the cover rails but you'll still be able to secure it. view full answer...
The Pullrite Superglide 2700 is not compatible with the 2022 Ram 2500 short bed with Ram boxes. When you have the Ram boxes installed the only choice is to use a fixed 5th wheel hitch and a rotating pin box like the Reese Sidewinder # RP34FR. You would need to identify your current pin box to find the right replacement.
If you end up getting the truck I would sell the sliding hitch to recoup some of the money. Then you can pick up a fixed 5th wheel hitch like the # C16120 which can be... view full answer...
Hi there Jay, thanks for the question and we do have a really good option to outfit your 2024 Toyota Tundra short bed with a hard roll-up tonneau and rack. I looked into the CT and Elevate but the info is they aren't compatible, so what you will need to go with is a different inside-the-rails tonneau cover, from BAK:
- BAK Revolver X4s Hard Tonneau Cover # BAK87AV
This is a hard roll-up cover and frankly, one of the best covers you can get - of any style. It sits about flush with your... view full answer...
Hi Tony; that's a good question and unequivocally the better option is the Curt A20 5th Wheel Trailer Hitch w/ S20 Slider # C55DR.
This will not only give you extra height, but won't void the warranty on your trailer frame like the Convert-A-Ball adapter does, gives you better turning clearance, and is just a more secure overall set up than what is essentially two different adapters.
The # C55DR is also just a really good hitch overall with a superb interlocking jaw system for a tight... view full answer...
Hey Jim, Curt states that the Crosswing part # C32DR can't be used with anything other than a spray in bed liner. But if your mat is really 1/8 of an inch thick and you don't have a spray in bed liner I would think it should still fit pretty easily.
What prevents the hitch from turning on the gooseneck ball is the set screws that hold the ball tightly and prevent it from being able to spin. view full answer...