Expert Answers about Freightliner Trailer Door Latch
- How to Determine Right Door Latch For Horse Trailer
- Hi Keeley; unfortunately we have no way of knowing what handle or latch is on any one trailer. So to determine it you'll have to measure the thickness of your door and dimensions of the cut out the handle fits.
For example, the Bauer Products Door Lock for Horse and Utility Trailers # BA63FR fits 1-1/4" to 1-1/2" thick doors and a 2-3/4" wide x 3-3/4" tall cut out.
I have added a link below to our selection of latches for you.
view full answer... - Replacement Tack Room Door Latch For A Featherlight Trailer
- We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by the cutout size.
If your cutout is 5" x 5" we do not have a lock that will fit those exact dimensions. The closest thing we have is the Bauer Products Motorhome Door Lock # BA64FR which will fit a 5-1/4" wide x 4-1/2" tall cutout. Is it made for a...
view full answer... - Recommended RV Entry Door Locking Latch Kit that Can Be Keyed Alike and Bluetooth Controlled
- We only have one entry door lock that can be controlled through Bluetooth and keyed alike. I do not have any way of knowing what size cut-out that your 2022 Mini Lite 2516 travel trailer has, so you will want to verify the dimensions you need. It is the Global Link RV Entry Door Locking Latch Kit # GL55VR and it fits a cut-out size of 3-3/4" tall x 2-3/4" wide.
view full answer... - What are the Dimensions of the Global Link and Bauer Cam Door Latches?
- Thanks for your patience! I just heard back from Global Link and Bauer and have listed the dimensions of these two locks below:
The Global Link Vise Lock for Cam-Action Door Latch item # 295-000025 measures 3-1/2" wide x 6" tall x 1-1/4" deep.
The Bauer Products Locking Cam Latch for Horse Trailers item # BA32FR measures 3" wide x 6.6" tall x 1.26" deep.
view full answer... - Replacement Slam Latch for a LCI Latch
- We've had this question come up before and I have linked a couple pictures below to see if they match up to what you have. If so you can use the Lippert Standard Baggage Door Latch Kit - Black item # LC317649 to replace your LCI slam latch.
I have linked a dimensional drawing of the Lippert item # LC317649 below. If this one does not match up with what you have go ahead and email me back directly with a couple of pictures and measurements and I'll be happy to look and see if we have the...
view full answer... - Replacement Entry Door Lock For A 2017 Jayco Eagle HT
- Hi Daniel,
In order to find the correct replacement for your current entry doo lock you'll first need to remove the inside portion of the handle to see and measure the cutout hole in the door. Once we know the dimensions of the cutout hole we can then look for a suitable replacement. The Global Link RV Entry Door Locking Latch Kit # 295-000019 you were looking at is designed to fit cutout holes 2-1/2" to 3" wide x 3-1/2" to 4" tall.
view full answer... - Determining The Correct Replacement Compartment Entry Handle For A 2015 Thor Challenger
- Since there isn't a guide to tell us the entry handle used on your compartment door you'll need to remove the backing plate of the handle to get a look at the cutout hole and measure it. Once we know the dimensions of the hole we can then look at replacements.
For example, the Global Link RV Baggage Door Slam Latch # 295-000078 requires a 3-7/8" wide x 3-3/8" tall cutout hole.
view full answer... - Replacement Door Handle for 2014 Newmar Dutch Star 4374
- Looking at picture of a 2014 Newmar Dutch Star 4374 the closest thing we carry is the Bauer Products # BA85FR. This fits cutouts that are 6" tall x 4" wide with overall dimensions of 7-3/8" long x 1-7/8" wide x 7-3/4" tall. You will need to know your cutout size to see if this or any other replacement handle will fit.
I went ahead and attached a link to all of our available latches below which can be filtered by cutout size for your reference.
view full answer... - Ramp Door Spring Recommendation for 200 lb 90" Wide Door
- Hey Rick, thanks for reaching out!
I'm guessing the 90" dimension is the width of your trailer door so for your application I recommend the Conventional Ramp Door Spring # M394FR because it has a 185 lb weight rating. This means that you'll still need to put a little effort into lifting the door, but you'll only be handling 15 lbs of it if your door really does weigh 200 lbs.
We have some higher rated springs but that can be dangerous since the spring can close the door by itself if it's...
view full answer... - What Size Steep Pipe Will The Replacement Retainers For Polar Fit?
- The Replacement Top Pipe Retainer # PLR74FR is designed to be used with a schedule 40 3/4" inside diameter steel pipe. This is a 1.050" outside diameter so if this is the measurement you are taking on your pipe this retainer is correct for your application. We also have the Bottom Retainer # PLR84FR.
We currently do not have any retainers compatible with a 1" inner diameter pipe and you may want to try your local trailer supply store.
view full answer... - Replacement Rubber Bumper for Ramp Door on Trailer
- The closest thing we have to a 2" x 2" bumper is the Rubber Bumper for Enclosed Trailer Ramp Door # 37210715 you looked at. This has a 2-1/2" diameter with a height of 1" and a 3/8" mounting hole.
view full answer... - Space Inside Trailer Needed For Lippert SolidStep 25" - 28-7/8" Wide Double Steps
- You will need a minimum of 10 inches of clear space inside your trailer for the double step Lippert SolidStep RV Steps for 25" - 28-7/8" Wide Doorways # LC733931.
Then for the threshold/lip that can be up to an inch for the install of the steps.
view full answer... - Recommended Replacement RV Steps for a 2024 Heartland Eddie Bauer 34BHS
- Hey Brad, thanks a bunch for going ahead and getting all those measurements in advance. Based on the measurements you've given, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step # TL52SR will work perfect for your coach.
These steps are going to be an awesome upgrade from your OEM steps on your 2024 Heartland Eddie Bauer, has a nice 325 lb capacity, and glows in the dark for up to 10 hours with only 5 minutes of light exposure (neat!).
If you need anything else, don't hesitate...
view full answer... - Recommended 3 Way Rocker Switch for Trailer
- We do have a rocker switch that can be wired in a three way config - the Single Rocker Switch # 37212625. This switch is American made, measures 1.2" tall x .5" wide, and has cut out dimensions of 1-1/8" tall x 1/2" wide.
view full answer... - How Does The Demco Trailer Coupler # DM88XR Mount To The Trailer Tongue
- Hey John,
The Demco Trailer Coupler # DM88XR is a channel mount style coupler and would need to connect to a channel like the # DM55342. We offer different channel mounts and versions with the channel built into an actuator so finding the correct part to go with it is going to depend on the style of the trailer tongue. If you want to send me some pictures and measurements of the trailer tongue if it's a straight tongue then I can pick out some options for you.
view full answer... - Looking For Barrel Hinge For Horse Trailer Tack Room Door
- Hello Kristine. We carry quite a few hinges and barrel hinges, so we very well may have what you need. If you can provide some dimensions for the hinge, I can take a look and see if we offer a match. Of if you would like to email me a few pictures I can take a look and compare. Feel free to send that over or post more info in the comments below and I am happy to look into it.
For example the Weld-On Hinge with Stainless Steel Bushing and Pin # MA66ZR is a very common barrel hinge. It...
view full answer... - RV Roof Vent Lid Replacement for Atwood Fridge and Step Set for 2013 Keystone Passport 2650
- Hey Ken, we have verified in the pas that the Camco RV fridge vent cover part # CAM42163 works with the Atwood fridges like what you have and is black in color.
The Lippert steps part # LC432690 that you referenced would also work great as a replacement step setup as well. This matches the dimensions you need and would work great.
view full answer... - Can I Mount the MORryde RV Generator Slide Out Tray MR79RR on a 5th Wheel Bumper?
- No, it really isn't but I have a solution. The MORryde RV Generator Slide Out Tray item # MR79RR is designed to be mounted in storage compartments. It needs a sturdy base to support the weight of your generator and you're not going to be able to get that mounting it to the bumper on your OutDoors 5th wheel trailer.
Instead, I recommend the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers item # MNT34FR. This bolts directly to square RV bumpers that measure 4", 4-1/2", 5-5/16",...
view full answer... - What Info Is Needed to Pick Out Conventional Trailer Ramp Spring
- Hey Scott you will need to get the width of your ramp as well as the weight of the ramp to pick out what you'd need. For example the part # M394FR is for 8 foot wide ramps and has a weight capacity of 185 lb.
I attached a link to all of the options we have if that is not what you need.
view full answer... - Replacement Dual Water Inlet For A 2005 Exiss 414 Horse Trailer
- Hey Lagina,
We offer a few different dual water inlets so you'll want to measure the cutout hole and overall dimensions to make sure that the replacement will be a fit and not interfere with any other trim or accessory that could be mounted on the wall of the trailer next to it.
The Valterra Lockable Dual RV Water Inlets # A01-2000VP (white) and # A01-2000BKVP (black) are a pretty standard size for most trailers so I'd say these are likely going to be what you need. They measure 7-5/8"...
view full answer...
Go To Results