Expert Answers about Scion xD

• Is Blue Ox Tow Bar Needed For Blue Ox Base Plates on 2010 Scion xD
• Hey there Don, that's a good question as there's a lot of different tow bars available, and the answer is no, you are not limited to only a Blue Ox tow bar for your 2010 Scion xD using Blue Ox Base Plates # BX3778. That said, it is easier and I do recommend going with Blue Ox as your first choice because you won't have to use any adapters; so if it were me I would go with the Blue Ox Alpha 2 # BX7380. But if you're okay with using adapters there are tow bars that come with them, the Roadmaster...
  view full answer...


• Can a 2009 Scion xD Be Flat Towed Or Dolly Towed?
• According to the owners manual for your 2009 Scion xD it can only be flat towed with all 4 wheels on the ground if you have a manual transmission. You can dolly tow with either an automatic or manual transmission. So a Tow Dolly # RM-2050-1 is likely going to be what you want. If you have a manual transmission and want to tow all 4 wheels on the ground please let me know and I can list the parts you will need. That install is likely going to require you to go to a local shop to have everything...
  view full answer...


• Will Thule Passage 2-Bike Trunk-Mount Bike Carrier # TH910XT Fit Scion xD
• Your Scion xD will work with several Thule trunk-mount 2-bike carriers including the Passage # TH910XT. The link for trunk-mount carriers provided will show you all four carriers suitable for the 2008 through 2013 Scion xD, which include the Passage, Gateway, Archway and Raceway series. Please note that for any of these carries the rear wiper on your Scion cannot be used with the rack in place, and the plastic cover over the rear bumper may deform from the weight of the bikes. (It is recommended...
  view full answer...


• Compatability of the Thule Passage 2 Bike Carrier Trunk Mounted Bike Rack On a 2008 Scion xD
• Yes, the Thule Passage 2 Bike Carrier Trunk Mounted Bike Rack, item # TH910XT, will work on your 2008 Scion xD. There are a couple of concerns to keep in mind when using this carrier. You should not use the rear wiper when the carrier is installed and you should remove the carrier when not in use because the rear fascia (plastic over bumper) will deform if the bike rack is left on the vehicle for extended periods.
  view full answer...


• 2 inch Hitch Ball Recommendation that Fits Curt Trailer Hitch # C111343
• A 2 inch ball mount cannot fit directly into the opening of the Curt hitch part # C11134 that you mentioned but a 2 inch hitch ball could if that's what you meant. We have the Euro ball mount part # C45572 which is a fit for this hitch that has a 2 inch ball.
  view full answer...


• Will the Thule OutWay Trunk Mounted Bike Rack Fit a 2008 Scion xD
• The Thule OutWay, part # TH45JV is a confirmed fit for your vehicle. Instead of the cumbersome straps and buckles used to attach the rack to the vehicle, the OutWay uses only 2 rubber coated straps that allow the rack to be quickly and easily installed and removed. The rack features an integrated One-Key cable lock system to deter theft of the carrier and the bikes. If you plan on carrying womens or alternative framed bikes you might also be interested in purchasing a Thule Bike Adapter...
  view full answer...


• Wiper Blades for 2008 Scion xD
• The windshield wiper blade lengths specified for your 2008 Scion xD are different for the driver-side and passenger-side wipers. This is not unusual. Neither takes the 19-inch size you mentioned. However, we do have blades that are a confirmed fit for your Scion. Our most popular blades that fit your 2008 Scion xD consists of 26-inch blade # SC59FR Scrubblade Platinum Windshield Wiper Blade for the driver-side and 14-inch blade # SC89FR for the passenger-side. These meet or exceed the...
  view full answer...


• How to Carry a Bike with a 2008 Scion xD
• The only hitch that fit your 2008 Scion xD is the Curt Trailer Hitch Receiver 11491 but that was discontinued back in 2020. (your photo didn't come through but I understand what type of hitch you're wanting) With that being the case, we still have some alternatives for transporting a bike with your vehicle; with a trunk mount or roof mount bike rack. A trunk mount rack, like the Thule Passage # TH910XT, is more cost-effective but it means you can't open up your rear hatch while it's installed...
  view full answer...


• Plug and Play 4-Way Wiring Harness For a 2009 Scion xD
• The Curt T-Connector Vehicle Wiring Harness # C56136 is a custom fit harness for the 2009 Scion xD which has incandescent tail lights. If you have the optional LED tail lights there is not a plug and play kit but you will instead need to tap into the tail light wiring with the Curt Powered Tail Light Converter # C59236 which will also require a power wire ran to the battery.
  view full answer...


• Will the Thule Gateway Pro Trunk Mount Bike Rack Fit a 2008 Scion xD
• Yes, the Thule Gateway Pro trunk mount bike rack # TH88VR, will fit your 2008 Scion xD. I have included a link to a video review of this bike rack for you. If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # TH982XT. This will allow you to carry those bikes more level and will provide better ground clearance. I have to use these adapters and without them my wifes bike would...
  view full answer...


• Recommended Cargo Carrier for 2008 Scion xD with Class I Hitch
• The 20x47 Cargo Carrier, part #63155, is listed to be used with either a Class I or Class II hitch. The information on our web site is correct. If your hitch did not come with one, you will need a pin and clip like part # PC2 or if you want a locking hitch pin, you can use part # e98879.
  view full answer...


• 2008 Scion xD Blue Ox Base Plate Kit Installation Instructions
• We do have the installation instructions for the Blue Ox Base Plate Kit # BX3778 that fits your 2008 Scion xD, but I'm not sure what installation video they saw as we haven't had a chance to install this kit yet. The instructions are attached to this answer page for you to reference. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these...
  view full answer...


• Best Bike Rack for E-Bikes with Fenders Step Through Frame and 1-1/4 inch Hitch
• We have the perfect rack for carrying your e-bikes with fenders and step through frames! You will want the Thule Easy Fold XT part # TH903202. This rack will fit your 1-1/4 inch hitch, has frame clamps designed for your style of frame, is specifically intended for e-bikes, and comes with ramps to make loading/unloading the heavier bikes (which it is rated for) easier. I attached a picture of the rack carrying a bike just like yours for you to check out as well.
  view full answer...


• Does the Thule Tepui Low-Pro 2 Rooftop Tent Come with An Annex
• The Thule Tepui Low-Pro 2 Rooftop Tent part # TH8001LP204 doesn't come with an annex and there is not one for this. The Yakima SkyRise HD Tent for Roof Rack Crossbars part # Y07436 doesn't come with an annex either but there is an option to add one using the Annex for 2 Person Yakima SkyRise Tents part # Y07421. I have a rooftop tent myself (Thule Tepui Kukenam) and did not get the annex as I didn't see the extra coverage being worth the added cost. That said, I also have a larger truck...
  view full answer...


• Can Underbody Panel Be Left In Place After Installation of Curt # C11491 on 2010 Scion xD
• When Curt did the test fittings, they saw that it would be fairly difficult to modify the panel so it would fit around the hitch. Therefore, they haven't tested how to trim the panel. The purpose of the underbody panel is to smooth and direct the airflow passing under the car while it's moving down the road, reducing some turbulence. Leaving the panel off will not harm anything, although leaving the panel off might have a very small negative effect on the aerodynamics of the vehicle. The...
  view full answer...


• Recommended Flat Towing System for 2012 Scion xD
• For your 2012 Scion XD, the Blue Ox Base Plate Kit - Removable Arms # BX3778 is a confirmed fit that will require some trimming of the fascia. I've attached the installation instructions to assist. The Blue Ox Alpha 2 Tow Bar - Motorhome Mount - 6,500 lbs # BX7380 will be a great fit for your vehicle and these base plates. This comes with the safety cables you need. For your wiring, I recommend the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket -...
  view full answer...


• Clearance Dimensions of Draw-Tite Sportframe Class I Trailer Hitch 24848 on 2010 Scion xD
• The Class I trailer hitches # 24848 and # C11491 both fit your 2010 Scion xD and they share identical weight capacities. Both offer no-drill installation and include all required mounting hardware. Since we have not had a chance to install both of these on your exact vehicle I cannot give you an iron-clad comparison of the hitch pin hole clearance, but what I can do is provide you with some measurements that may help. We have the # 24848 in our warehouse so I measured the distance from...
  view full answer...


• Which Yakima Q Clips are Needed to Install a Yakima Roof Rack on a 2013 Scion xD
• For your 2013 Scion xD both of the clips you mentioned are needed to install the Yakima roof rack but they have been discontinued by the manufacturer. My recommendation for you is to use the roof rack consisting of the following: Vortex aero crossbars # RRVA118B-2 Feet # RRRLKVA Custom fit kit # DK060 This roof rack is great quality for the cost compared to other brands. It will also include the locks needed to secure your investment.
  view full answer...


• Is StowMaster Tow Bar Compatible with EZ Base Plate Kit for 2008 Scion xD
• Yes, the Roadmaster EZ Base Plate Kit # 521181-5 for your 2008 Scion xD is compatible with the Roadmaster StowMaster Tow Bar # RM-501. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these components then I recommend picking up the following: EZ Base Plate Kit - # 521181-5 StowMaster Tow Bar - # RM-501 Safety Cables - # RM-643 Wiring...
  view full answer...


• Can Two Additional Brake Lights be Used on Trailer
• In the scenario you are referencing you are simply adding one light to the left turn/brake light circuit and one light to the right turn/brake light circuit, which is perfectly fine if that's what you want to do. I would be unable to speak to its legality and would highly encourage you to take a look at your local laws but I can't see why it would be an issue. So all you need to do to add these lights is wire in something like the Optronics LED Trailer Tail light # STL72RB by using 3-Wire...
  view full answer...