The Thule Motion XT XXL roof box part # TH629906 does fit the OEM crossbars of your 2021 BMW X3 but to determine fit will allow your rear hatch to open you'll need to take one measurement. You'll need to measure from the center of your front crossbar back to the rear hatch seam. If that is more than 55 inches this will fit and allow the hatch to open. view full answer...
Hi Max,
The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH95VR you were looking at is a confirmed fit for your 2012 BMW X3 - 28i. This comes with a receiver tube for your hitch mounted accessories, a ball mount for towing a trailer, and a wire harness to transfer your light signals to the trailer.
I recommend picking up some quick links # 37201325 as well to make attaching your safety chains easier. view full answer...
Tekonsha actually says there are no custom fit electrical wiring products for your 2016 BMW X3. I'm not entirely sure what you were looking at, perhaps it was a different year or model since you said you couldn't find one for the 2016. The # 119250KIT we list is a universal wiring harness so we know it will fit your vehicle. This uses the zero-contact interface sensors that clamp onto the wires. It is the only option that will not require splicing. The only other option for a wiring harness... view full answer...
If you're asking if the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT will work with your 2016 BMW X3 then the answer is yes - the # 119250KIT kit is a universal harness, so it'll work great. view full answer...
The etrailer Hitch # e46KR won't have any issues with your 4,000 lb trailer. As long as you do not exceed the 5,000 lb rating the hitch can handle it. The only thing you will need to double check is the towing capacity of your vehicle. Without the year and exact model I can't look up what your X3 is capable of. Make sure to consult your owner's manual to find the capacity. You will be limited by whichever capacity is lower. view full answer...
Hey David, yes the Draw Tite hitch part # 76226 is going to work great with a 1-Up bike rack like you mentioned that has a friction style hitch pin. The pictures might be a little deceiving but hitch tube length of this hitch is a standard size. view full answer...
Hi Jason,
Good question and I can verify for you that yes, the hands-free liftgate on your 2024 BMW X3 (including the x30i models) will absolutely still work when you install the Draw-Tite hitch:
- Draw-Tite Max-Frame Trailer Hitch Receiver # 76226
There are no drawbacks regarding using the liftgate, and the range lost is simply that you have to kick your foot to the side of the 2 inch receiver rather than directly under it. If you take a look at the photo you can see exactly where you... view full answer...
The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX29FR is for disc brakes and comes with a manual lockout key which you could use to manually lock it out and reverse the trailer without brakes locking up. It's a little odd but the surge disc brake actuators are basically all electric lock out so this would be your best option. view full answer...
Honestly Ladd, not much. All of the hitches: the Curt # C13387, Draw-Tite # 76226, and etrailer # e46KR are basically the same size, weight (30 lbs), and have the same weight capacities.
The only thing separating these hitches is going to be the actual brand name, and the fact the Curt and etrailer hitches are assembled in the USA. view full answer...
Go To Results