Curt 4-Pole trailer wiring harness kit # C56245 fits the Chevrolet Traverse for model years 2013 through 2017. For your 2011 Traverse we do offer similar plug-and-play wiring kits and the correct one will depend on how the car is equipped.
If you have the factory tow package the car will have a round U.S. Car connector under the rear bumper that will accept a 4-pole plug-in harness # 118384 or a combination 7-way/4-pole harness like # HM40975.
If the car does NOT have the factory tow... view full answer...
For your 2010 Chevrolet Traverse we offer a range of accessory items, as well as many styles of floor mats that you can view on the two included links.
On the page for floor mats just select your 2nd row seat style using the drop-down menu tool at the top of the page. You will then see all the mats that are confirmed to fit that specific version. You can also choose for which row of seating you want the mats by clicking on the appropriate filter on the page. You can also select your preferred... view full answer...
For the Curt hitch-mount cargo carrier # C18153 there is no specific light kit offered but we can help you with the individual parts you'd need to install one.
What you will need to do is use a light kit like # 98174LED, and then add 2 brackets # BK70BB. You will also need some self-tapping screws # FA1131822, or drill and use the hardware of your choice to mount the brackets.
I noted in your purchase history that you have a 2011 Chevrolet Traverse, which will need to have a 4-pole... view full answer...
Yes we have the fit for front visors only on your 2011 Chevy Traverse. It is part # WT80499. To see the current pricing just click on the link to the products below. view full answer...
If you have a round trailer connector harness under the bumper of your 2011 Chevy Traverse the part # C55515 would work as a 4-way harness.
If you can't find that connector you would use the part # 118450 for a 4-way harness. If you need to order something right now this harness would fit regardless of your setup. view full answer...
We sell both complete hydraulic brake assemblies (and electric drum brakes too, of course) as well as individual replacement parts like shoes, springs and wheel cylinders for hydraulic brakes. We also offer parts for electric brakes including magnets.
I linked for you our pages for both complete hydraulic brakes and for individual hydraulic brake replacement parts. Among the individual parts shown are pads/shoes. Just click on the category of parts you need.
Keep in mind that brake parts... view full answer...
Yes. The Curt # CU29FR you were looking at is a confirmed fit on the 2019 Chevy Traverse and gives you a Class III hitch with a 2" receiver, so it's a great choice for both carrying hitch mounted accessories and towing. I've linked an installation video of this hitch for you to have a look at, as well as compatible wiring harnesses in case you'll also be towing a trailer. view full answer...
I do have a way for you to have a 7-way and 4-Pole connector on your 2020 Chevrolet Traverse, but there isn't a wiring harness for your car that comes with both plugs.
You can use the T-One Vehicle Wiring Harness # 118287, which is confirmed to fit your Traverse, and plugs directly into your factory harness. You can then use the Hopkins # HM40975 in place of the 7-way socket that comes with the harness. The # HM40975 also comes with a mounting bracket to easily attach it. view full answer...
I have a solution for you. The Hopkins Wiring Harness, # HM48035, will replace the malfunctioning 4-flat plug on your vehicle.
You will just need to cut off the current plug and using Deka Heat Shrink Butt Connectors, # DW05744-5, connect the new plug to your wiring harness. view full answer...
What you would need to do is install a hitch on your 2012 Chevy Traverse with a 2 inch opening like the part # 75528 which is confirmed as a fit for your vehicle.
With that installed you can use a Hollywood Racks Sport Rider SE2 2-Bike Carrier for Electric Bicycles # HLY84FR which is designed for carrying E-bikes like yours and would have plenty of capacity. The rack has an 80 lb per bike capacity. view full answer...
I found the mounts that you will need for your 2015 Chevrolet Traverse.
You will need to use # AA2051106 Custom Mounting Kit for the Chevy Traverse when installing the AeroTread Running Boards, # AA2051976.
These mounts are custom-fit and require no drilling when installing on you vehicle. view full answer...
I have an option that will allow you to install longer crossbars on your 2016 Chevy Traverse, but we don't have a roof rack that would use your factory flush rails for the attachment points.
The solution would be to use the Rhino-Rack Custom DK Fit Kit # DK297, along with the Rhino-Rack 2500 Series Legs # RRRLKVA. This system would bypass your factory rails, and fit over them, using a clamp-style attachment to secure itself onto your vehicle's roof.
With those in place, you can choose... view full answer...
For the trailer wiring harness part # C56027 the green wire goes to the passenger side rear taillight assembly and the connector with the yellow wire goes to the driver side. I also attached an install video for this for you to check out as well on a similar 2012 Chevy Traverse. view full answer...
I have a solution for you, but unfortunately there are not any Thule roof racks available for a 2017 Chevy Traverse so you will need to go with a different setup. Since your roof is naked, meaning no factory rails, you will instead want to go with SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B. This is a universal round bar setup that attaches to your roof with 6 strong vacuum cups. This does not have a top track for channel-mounted accessories so you... view full answer...
The trailer wiring kit you would want for your 2015 Chevy Traverse that has the rear AC is the Tekonsha part # 118270. This wiring harness can be used as an OEM replacement, but it also includes the fuses and relays to activate the tow package if your vehicle was not equipped with the tow package.
This will be a plug and play model that will install easily and would not interfere with the AC.
The Hopkins kit you referenced would work but is a universal hardwire application.
Check out... view full answer...
Since you have a 2010 Chevy Traverse the cargo mat that you would want is the part # WT42424 as the # WT42328 is for a Highlander.
If you planned to use the third row of seats you would want to remove the mat, it would most likely block visibility out of the back window if you rolled it up behind the third seat.
For a mat that would fit behind the third seat you would want the # WT42632. view full answer...
We do not have 5-pole type wiring harnesses for your 2012 Chevrolet Traverse but it is easy enough to adapt 4-pole wiring to the 5-pole format simply by adding an adapter kit. We offer three such items, parts # 20036, # 47515 or # C57187. I linked an install video for part # 20036.
All of these include an additional wire/circuit to allow connection to the reverse light circuit for a trailer coupler lockout function or for any other circuit function you require. view full answer...
I have a trailer wiring harness that does fit your 2010 Chevy Traverse, but the # 56094 is not it. Instead you would want the part # 118450 which is a confirmed fit and will work well.
I attached an install video for you to check out as well. view full answer...
Go To Results