The only adapter available to add 5th wheel rails using the factory gooseneck hitch on your 2019 Nissan Titan is the Demco # DM6200, but it will work well and allow you to use a standard 5th wheel hitch in your truck bed. view full answer...
Unfortunately, the Nut-On-A-Stick is not available by itself, so you'd actually have to purchase the entire Replacement Hardware Kit for Firestone Ride-Rite Air Helper Springs # FA21-760-2355 which would include the Nut-On-A-Stick you're looking for. view full answer...
The Hopkins Plug-In Simple Wiring Harness 4-Pole Flat Trailer Connector # 41155 has a bracket designed perfectly for it: the Hopkins Fold-Over Mounting Bracket # HM48595. I attached a video that shows how to use it with your 4-pole flat harness. It just folds over the harness and can be screwed up into your bumper, hitch, etc.
Some also use separate no-drill mounts like the #18136 long bracket or # 18140 short bracket. These are separate mounts for your bracket mount if you don't want... view full answer...
Even though your 2017 Nissan Titan SV did not come with a factory tow package installed the connectors are already going to be on your vehicle. For the 7-way you need the Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector # N40975. This will connect to the factory connector behind the bumper of your Titan. It includes the necessary relays to add to your fuse box to activate the tow package.
For the brake controller I recommend the Tekonsha Prodigy P3 # 90195. This controller... view full answer...
If you have a 2007 Nissan Titan or Frontier and the truck has a factory installed 7-Way trailer connector all you will need is the brake controller and vehicle specific wiring harness. I recommend going with a proportional brake controller that engages the trailer brakes in proportion to how much the truck is breaking. This will reduce wear and tear on the truck and trailer and make for safer braking situations.
For a proportional controller with wiring harness, I recommend the Tekonsha... view full answer...
Yes, you will need the Tekonsha Wire Harness for Nissan, item # 3050-P, to plug the P-2 Brake Controller, item # 90885, in under the dash on your 2010 Nissan titan.
If your vehicle is not equipped with a factory 7-Way connector at the rear of the vehicle you will also need to install the Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector, item # N40975, which comes with the needed relays for vehicles without the towing package, see video. view full answer...
For your 2004 Nissan Titan, the TS (T-Slot) Rails for Truck Hero Elevate Rack System # TH75FR you mention will work with the BAK Revolver X4s Hard Tonneau Cover # BAK58ZR.
From here you can add the Truck Hero Elevate Ladder Rack to your 2004 Nissan Titan. view full answer...
If your 2007 Nissan Titan came with a factory 7-Way trailer connector then the Tekonsha P2, # 90885, and the wiring harness, # 3050-P, will fit your truck. If your truck did not come with the factory 7-Way then you will need both parts mentioned above and also # N40975 to add the 7-Way. I have included a link to a video showing a typical brake controller installation on a similar vehicle. I have also linked a video showing a typical installation of the # N40975 connector as well. view full answer...
I recommend using the Factory Style 7-Way and 4-Way Flat Vehicle End Trailer Connector # N40975, which would give you both a 4 way and 7 way trailer connector and uses the US car connector wiring that is present on all 2017 Nissan Titans. This kit comes with the relays included needed to activate the factory tow package wiring and is a great solution that gives you everything you'd need to tow trailers with either connector.
There is not a harness available for only a 4 way, so this would... view full answer...
It sounds like you're looking for a complete roof rack system where the tracks are 54" to put on a camper shell that's on your 2013 Nissan Titan. If that's the case, you're looking for the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Long # Y01-120B, which is a complete roof rack kit with 54" long tracks that can be mounted on a camper shell. This system comes with the Rhino Rack Vortex Aero Bars, so they're aerodynamic and will help reduce wind noise and... view full answer...
I have a solution for you, but I'm not aware of any RV fan/vent that actually has a wired wall control since these fans don't actually control any temperatures. However. the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke # MA00-04500K does provide you with everything else you're seeking and comes with a handheld remote control that can be mounted on the wall with the included bracket, so you'll have a wall mounted control as well.
The color... view full answer...
I have a solution for you, but the CIPA # CM11401 is designed to fit on mirrors for Dodge Ram trucks. Unfortunately there are not a slip-on style mirror available for your Nissan Titan, so I instead recommend using the CIPA Universal Towing Mirrors # CM11980-2 which are a universal fit towing mirror that will fit on your 2007 truck.
I've linked a review video of these mirrors on a newer Nissan Titan that I recommend having a look at. view full answer...
For your 2008 Nissan Titan, I would suggest the Reese Semi-Custom Install kit, part # RP30035-405. This kit has all the hardware you will need to get the truck set up for a traditional bed rail fifth wheel hitch. I have added links to the instructions as well.
Reese 16K Fifth Wheel, part # RP30051 is a fifth wheel equipped with a slider, which you will not need since you have a full 8 foot bed. Instead I would recommend Reese part # RP30047. It is the same as 30051 but without the sliders.... view full answer...
In your 2006 Nissan Titan that did not come with a factory 7-way wiring set-up you can install a trailer brake controller like the popular Prodigy P2 # 90885 using the quick-connect wiring adapter # 3050-P that plugs in between the controller and the port that is under your dash. The only other item you will need is the 7-way socket and relay kit # N40975. Please refer to the linked videos showing installations in a Nissan vehicle. view full answer...
The # N40975 wiring package is all that you need to set you Titan up for towing. It comes with all the relays needed as well. This trailer connector provides both a 4-pole and a 7-way connector.
To see a video of the connector being installed on a similar vehicle, click the provided link. view full answer...
I recommend using a Rhino-Rack set up for your application. This includes the Vortex Aero Crossbars # RRVA150B-2, the 2500 Series Legs # RRRLKVA, and the DK Fit Kit # DK468 for the roof rack. Then you need the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar # RTL002 which fits a 2" hitch.
The parts above give you a full 2-bar roof rack which can be useful for multiple applications but if you are only wanting a 1-bar roof rack you need parts # RRVA150B, # RRRLKVAH, and # DK468H. view full answer...
When it comes to installing a brake controller in your 2018 Nissan Titan The Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195 is compatible with your vehicle, but you would also need The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti # 3050-P.
The main difference between The P3 and The P2 is that The P3 has 5 storable settings that let you customize controller for multiple trailers, varying loads or different drivers.... view full answer...
I recommend going with the 1,000lb SumoSprings Solo Custom Helper Springs # SS35GR for 4WD or # SS35GR for 2WD.
These are going to give you all the support and control you need, without affecting your factory ride quality on daily driving.
The 1.5K capacity springs & higher are more for a setup that is constantly loaded like a built out van or truck with a camper on it full time. view full answer...
I do have an alternative option for you but unfortunately there have never been any custom fit towing mirrors for a Nissan Titan (even up to the newest models of the Titan).
Since you had a bad experience with the type that use clips and straps to secure around your side mirrors I recommend using the Wheel Masters Eagle Vision Universal Extendable Towing Mirrors # WM6600-2 instead because they use hooks, straps, and a ratchet to secure to the door of your 2008 Nissan Titan.
Attached are... view full answer...
The Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black item # LC285318 is a great jack and it is highly reviewed. This jack will exceed your expectations. It has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. It extends 6" in 41 seconds with 1,000 lbs of tongue weight. I have linked a couple of review videos. view full answer...
Go To Results