9-pin connectors are rare these days. We do still offer vehicle and trailer side connectors of this type, such as # PK12907 and # PK12906, but we do not have any adapters that can convert your truck's 7-way blade-style RV connector to a 9-pole round pin type. A 9-pole connector like # PK12906 has two extra circuits (auxiliary on the gray wire and reefer on the orange) that would not be supported if fed by a 7-way socket. You'll want to swap out the truck connector using part # PK12907. view full answer...
Yes, we have an adapter for the 7-way connector to make the connection to your hitch cover. You can use either the Pollak 7 Pole to 4 Pole Connector Adapter, # PK12716, or the Adapter 7 Pole to 4 Pole with Tester and Cover, # 47345, to make the connection. view full answer...
According to everything I'm seeing, the 2008 Chevy Silverado 3500 did not come with factory pucks, so this is most likely going to be an aftermarket type puck kit. If the pucks have a gooseneck installed and are installed in the same manner as the 2016-2019 Chevy Silverado 3500 with OEM Prep Package then you can use the Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package - 8' Bed - 21K # DM6206. You would want to confirm that this kit was installed with the same... view full answer...
We do have OEM style mirrors like # KS62073-74G but they do not have the electric adjust feature.
If you currently have the electric features on your vehicle then the best option is to use a different style towing mirror that attaches to your current mirror housing. I recommend the K-Source Universal Dual Lens Towing Mirrors # KS3990 or Custom Slip On # CM10800 because they retain the current features and increase the viewing angle when towing a trailer by adding manually adjustable... view full answer...
They're are over 300 different possible keys that the Global Link lock cores can come with we carry several of them as replacements. The odds would be pretty slim a thief would be happening to carry the correct one.
Some RV door latches all use the same key, but not these ones.
I attached a link to the page we have that has all of the keys we have. view full answer...
The B&W Custom Mounting Brackets for Patriot 5th Wheel Above Bed Base Rails, # BWRVR2506, will not work on your 2013 Chevrolet Silverado 1500 truck. This custom bracket kit is confirmed to fit only the 2500 and 3500 models.
The Reese Quick-Install Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches, # RP50064-58, is confirmed to fit all bed lengths of the 2013 Chevrolet Silverado. The Reese custom kit requires less drilling which increases installation time by over universal... view full answer...
On your 2008 Silverado there is not a wire connector to plug in a brake controller wiring harness but there is a bundle of wires under the dash with a white tag on it to help you identify the wires for the brake controller. This bundle will contain a thick blue wire also. Once you have the wire bundle located you will have to hard wire the brake controller to these wires. The thick blue wire on the truck goes to the blue wire on the brake controller, the light blue wire with the white stripe... view full answer...
We offer several trailer wiring adapters that can convert a 7-way blade connector on the vehicle to a 6-way round pin connector on the trailer. You can see all of these on the linked page.
These include solid adapters like # HM47570 as well as cabled types like # HM47053 and # HM47083. I recommend a cabled adapter since it will provide strain relief and make it easier to do the connections.
You need to note that a 6-way can be configured in either of two ways. Please refer to the linked... view full answer...
We do offer slide topper awnings that are larger than the Solera 13' Slider # LCV000165061 that you referenced.
In a 16-foot we offer part # LCV000194925 in black and part # LCV000163307 in white. We also offer 15-, 14- and 14-1/2-foot versions. You can click on the link provided to see them all and select the size you prefer.
Select the size that extends a minimum of 2-1/2-inches beyond each side of your slide box width. view full answer...
The Glacier Cables part # PW2028C that you referenced has been confirmed to fit the tire size 265/60-20.
This is actually the only size of cables we offer for this tire size.
Be sure to check the owners manual of your vehicle to determine if there are any restrictions on tire chain/cable use. view full answer...
Before I can help you pick out an exhaust system we need to know your bed length and cab style. There are several different systems available that would give you an increase in power, economy and a nicer sounding exhaust note. But until I know those details I cant really help you.
I attached a link that will allow you to select your engine, payload, bed length and cab style and then will direct to you a page that has all of the available systems for your vehicle.
I attached an FAQ article... view full answer...
We do offer adapters that allow a gooseneck trailer to be towed by a truck with a 5th wheel hitch. Some of these offer a bit of offset for better trailer-to-cab clearance.
Curt Above-Bed Gooseneck Trailer Hitch for Fifth Wheel Rails # 16055 fits into industry-standard 5th wheel rails (ISRs) and provide 3-inches of offset. Husky # HT31368 has the same 3-inch offset. None offers 12-inches of offset.
If you need another type of adapter you can use the linked page to select the category... view full answer...
If the grille guard you have is a Westin Sportsman Grille Guard part # 40-1175 for your 2003 Chevy Silverado 1500 the hardware kit you'd need is the part # 40-117PK. You should note that the guards and the hardware are vehicle specific so you can't use a new hardware kit to adapt a different guard to your truck. view full answer...
The best bet for a locking tailgate handle for your 2007 Silverado Classic would be to use the Pop & Lock Power Tailgate Lock, part # PAL8110. If your truck doesn't already have power locks, you'd also need the switch kit, part # PAL9520.
According to my Bolt representative, the tailgate handle assembly of the 1999-2006 and 2007 Classic model Silverado is completely different that that of the 2007 New Body and 2008 to present locking tailgate handles. The tailgate handles of the older... view full answer...
Reese doesn't offer an adapter like the Curt # C16210 that would work with your sliding hitch, but there is an alternative that would work for you.
Reese offers the Hi-Rise 5th Wheel Trailer Hitch # 9480-5W that would be compatible with your Hide-A-Goose gooseneck hitch. This is a non-sliding hitch that would only be compatible with a long bed truck. view full answer...
I have solution for you. Unfortunately, the Stallioin Wheel Lock, # 288-02020, are keyed uniqued and can not be keyed alike.
The Blaylock EZ Trailer Wheel Lock, # BLEZ-302, is an sturdy aluminum wheel lock that can be keyed alike for a small charge.
If you are looking for a more economical option, Fastway has the Universal Trailer Coupler Lock, # FA86-0015-318. This coupler lock will fit 1-7/8, 2, and 2-5/16 inch trailer balls and is also keyed alike. All of the parts # FA86-0015-318... view full answer...
The fit of towing mirrors on your vehicle depends on its exact brand/year/make/model/version as well as on the mirrors currently installed. You indicate your truck is a 2005 model year 2500HD, so I will assume it is a Chevrolet. If not please advise the specifics for your truck and whether the mirrors on it are OEM or aftermarket.
Please note that we do not offer any replacement or add-on towing mirrors with a powered retracting feature, only a manual retraction feature as with the CIPA... view full answer...
There sure is! The Roadmaster Rear Ant-Sway Bar you referred to, part # RM-1109-167 is a fit for your 2008 Silverado 1500. The anti-sway bar is compatible with your Air Lift air bag suspension. If your truck is lifted, you'll need the extended end-links, part # RM-590045-00.
If you'd care to see the installation instructions, or other items that are available for your truck, please click the provided links. view full answer...
The piece shown in the photo you provided is a stabilizer bracket that Trailer Valet has discontinued. Trailer Valet tells me that using a mounting bracket like # TVXLMB would provide more stability, and would be their recommendation. view full answer...
We have both front axle and rear axle Timbren rubber spring suspension enhancement kits for your 2000 Chevy Silverado 1500 that are displayed on the linked page. You can also see other kit options including air bags.
For a rear axle Timbren kit you can use # TGMRCK15S which fits both 2WD and 4WD models.
If you are interested in a front axle kit too, in case you use a snowplow for example, you can use Timbren kit # TGMFK25S for 2WD or kit # TGMFK15A for 4WD (if the truck is a 2-door model). view full answer...
Go To Results