The towing capacity of a 2016 Cadillac SRX FWD 3.6L is 2,500 lbs for models without the factory tow package or 3,500 lbs for models with the factory tow package. Adding the towing components aftermarket won't increase towing capacity in their eyes but we do still have everything you need to get setup and I have attached this below.
Draw-Tite Max-Frame Trailer Hitch Receiver part # 75682
T-One Vehicle Wiring Harness part # 118259
etrailer Ball Mount Kit part # 989900
Derale Series 8000... view full answer...
We do not have chrome window air deflectors, but we do have dark-tinted ones that you might be interested in. They are part # WT80250 for the front doors. You would want part # WT82250 for all 4 doors.
Both of these are confirmed to fit all model S-Types so they would work for you. view full answer...
The Glacier V-Trac Cable Snow Tire Chains - 1 Pair # PW1042 are compatible with your 275/35-18 tires. You will simply want to make sure you have a minimum of 1.46 inches between the top of the tire tread and wheel well and at lease 0.59 inches between the tire's sidewall and the vehicle.
We haven't specifically tested these chains on your vehicle with those tire size, but the chains have been tested and confirmed for those tires as long as your vehicle has the above clearances.
I've... view full answer...
For your 2005 Jaguar S Type we have the Rain X wiper blade part # RX5079280-2 for the driver side and part # RX5079276-2 which is a bit shorter for the passenger side. These are a confirmed fit and will work very well for you vehicle. The adapter on your current blades for the fluid would need to be reused on this. view full answer...
The Thule OutWay Trunk Mounted Bike Rack # TH45JV that you referenced is a fit for your 2004 Jaguar S-Type R that has a spoiler and also is the best option available so I recommend it highly. It is overall the easiest to install and load bikes on and is the most secure mainly due to the 2 rubber coated steel cables it uses to attach to your vehicle instead of the 4-6 nylon straps of other trunk mounted carriers.
To load bikes without a horizontal top tube the trick is to also use a bike... view full answer...
I went and pulled a Dutton Lainson Winch Handle part # DL70326 from our warehouse to measure the slot and found the dimensions to be 1/2 of an inch by 3/8 of an inch. If the dimensions of your winch handle are the same this handle should work well for you. view full answer...
Go To Results