Expert Answers about Kia Rio recommend

Expert Answers about Kia Rio

Parts Needed to Flat Tow 2014 Kia Rio LX Manual Transmission
I did some checking and it looks like the manual transmission versions of the 2014 Kia Rio like yours can be flat towed behind a motorhome as-is without issue. So for a base plate kit you'd want the part # 521634-1 which is a confirmed fit for manual transmission sedans like yours. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520....
view full answer...

Recommended Wiring for RedArc BCDC Charger Used for Auxiliary Battery to Power Inverter
To connect your Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 40 Amp # 331-BCDC1240D, you will need the 60-Amp MIDI Fuse Kit for Redarc In-Vehicle 40-Amp BCDC Battery Charger # 331-FK60. This will protect your vehicle and battery from potentially damaging overcurrent from short circuits or overloads. You will run the Red Wire from your RedArc unit to the fuse, and then from the fuse to the positive battery terminal on your vehicle start battery. I've attached...
view full answer...

How To Flat Tow a 2012 Kia Rio
I do have an option for you but the 2012 Kia Rio cannot be towed with all four wheels down. However, it can be towed behind your motorhome using a tow dolly, the Roadmaster Tow Dolly with Electric Brakes part # RM-2050-1 is what I recommend. This tow dolly will actually be more cost effective than a full flat-tow setup and it will not cause as much wear on the vehicle as only half of it will be making contact with the road which keeps your front suspension in full working order. The Roadmaster...
view full answer...

Recommended Roof Rack and Aluminum Cargo Basket for 2013 Kia Rio 5 Door
For your 2013 Kia Rio 5 door, to add a roof basket you will first need to add a roof rack. I recommend the Inno Aero Roof Rack # INXB100-108, # INXS200, and # INK608 which is a custom fit for your vehicle to mount to a naked roof (no side rails). The rails will be 27-1/2 inches on center. I've attached the installation details to assist. Then for an aluminum roof basket, we have the following options: Aluminum Roof Mounted Cargo Basket - 44" Long x 39" Wide x 7" Deep # 288-09200 Thule...
view full answer...

1-1/4 Inch to 2 Inch Adapter to Carry Load Extender and Ladder on a 2005 Kia Rio
You would need adapter # HTAD since all of the trailer hitches for the 2005 Kia Rio are Class I trailer hitches. The use of an adapter or extender reduces the tongue weight capacity of the trailer hitch by 50 percent. So if you installed a trailer hitch with a 200 pound tongue weight but then used the adapter, the 200 pound capacity would be reduced to 100 pounds. The combined weight of the load extender and anything on it would have to be less than 100 pounds.
view full answer...

Trailer Hitch Wiring For 2018 Kia Rio
For the trailer wiring on your 2018 Kia Rio, you will need # 118793. This will simply plug into your factory taillight wiring connector, no cutting or splicing is required. You will then run the white wire to bare metal for ground, and the black wire to the positive terminal on the battery. Instructions are included. Always be sure not to exceed the towing capacity of your vehicle, which will be in your owner's manual or can be found by contacting the manufacturer of your vehicle.
view full answer...

Adapter to Use 2 Inch Bike Carrier on 1-1/4 Inch Class I Trailer Hitch for a 2009 Kia Rio Sedan
You could use adapter # HTAD to go from a Class I, 1-1/4 inch hitch to a 2 inch accessory. However, doing so will reduce the tongue weight capacity of the trailer hitch by 50 percent. On your 2009 Kia Rio all the hitches are rated for 200 pounds tongue weight so by using the adapter it would be reduced to 100 pounds. The combined weight of the bikes and carrier cannot exceed 100 pounds. Because of this I recommend a carrier that is designed for a Class I hitch such as # S63360. I have linked...
view full answer...

Roof Rack Recommendation for 2014 Kia Rio Sedan
The Inno Aero roof rack part numbers # INXB123-130, # INXS250, and # INK608 is a confirmed fit and a great option for your 2014 Kia Rio sedan with a naked roof. This gives you a higher quality aero shaped roof rack that fits your vehicle that rivals the more expensive racks in terms of quality at a much better price.
view full answer...

Trailer Hitch and Wiring for a 2013 Kia Rio Sedan
Draw-Tite trailer hitch # 24884 can handle the roughly 800 pounds of loaded trailer that you want to tow. But you have to check with Kia or your owner's manual to determine what, if any, towing capacity your 2013 Rio sedan has. I was unable to locate that information. In addition to the hitch you will also need the recommended ball mount # 3592 and a ball. For a 1-7/8 inch ball use # 19257 and for a 2 inch use # 19258. And for trailer wiring use # C56157 to add a 4-Way flat connector to...
view full answer...

Can a 2015 Kia Rio Be Flat-Towed
In order to flat-tow a 2015 Kia Rio you'll need to do so on a tow dolly with the front two wheels in the air, the Roadmaster Tow Dolly with Electric Brakes part # RM-2050-1 is a great cost effective option for this. The reason a tow dolly must be used has to do with the vehicle's inability to lube the transmission properly while towed with all four wheels down. Please note, using a tow dolly actually causes less wear and tear on the vehicle so it's still a great option and you don't have...
view full answer...

Will Rhino Rack Roof Rack # RR92MR fit 2012 Kia Rio and be Compatible with Yakima Frontloader
The Rhino Rack roof rack part # RR92MR that you referenced is the correct roof rack for your 2012 Kia Rio with a naked roof. The Yakima FrontLoader bike rack, # Y02103, will fit crossbars that are up to 4 inches wide so it would work with the Rhino Rack crossbars as well. I attached a review video for this rack for you to check out as well.
view full answer...

Recommended Trailer Hitch For 2007 Kia Rio
You came to the right place. We try stay up to date with our information on vehicles and hitches and what is designed to fit. If your 2007 Kia Rio is a sedan we have the Curt Trailer Hitch Receiver - Custom Fit # C11094. This is a Class l hitch and has a 1-1/4 inch receiver opening. If you are planning on doing some light towing and need a 2 inch hitch ball I recommend part # 19258. If you need a 1-7/8 inch hitch ball the number you need is part # 19256. If you need trailer wiring...
view full answer...

Hitch Recommendation for 2012 Kia Rio Sedan
The best hitch for your 2012 Kia Rio for carrying a bike rack will be the Draw Tite hitch part # 24884. It doesn't require a stabilizer strap like the Curt does and doesn't have an included ball mount like the Hidden Hitch does. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058.. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three. Check...
view full answer...

Parts Needed to Flat Tow 2010 Kia Rio with Falcon Tow Bar for Blue Ox Base Plate Kits
It sounds like you have a Falcon 2 Tow Bar that has the Blue Ox Base Plate kit adapter built into it like part # RM-525. I attached a picture that shows what the end of the arms of this tow bar look like. To make things easy then you would want to use the Blue Ox base plate kit confirmed as a fit for your 2010 Kia Rio part # BX2720. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and...
view full answer...

Hitch Recommendation for a 2007 Kia Rio for Light Towing
Since you are planning on doing some light towing with your 2007 Kia Rio sedan I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11094. To complete the towing setup you will also need a ball mount and part # 19256 for a 1-7/8 inch hitch ball and/or # 19258 for a 2 inch hitch ball. For trailer wiring you would want the part # 119178KIT. I am sorry, we don't have kits on our site, but we are always readily available to create you a custom kit like this. Just...
view full answer...

What Roof Mount Cargo Baskets Fit a Rhino-Rack Roof Rack on a 2012 Kia Rio EX 5-Door Hatchback
For your 2013 Kia Rio 5-Door and the Rhino Rack roof rack, there are numerous basket options that will fit. Depending on the size you want here are the options: 46 inches long by 34 inches wide, # RLBS-S280. Based on the vehicle I recommend this basket. We also have these sizes: 48 by 38 inches, # RPBM-S280 56 by 23 inches, # RPBH-S280
view full answer...

Parts Needed to Flat-Tow a 2002 Kia Rio Behind a Motor Home
The first thing you will need is a Roadmaster XL Base Plate Kit # 2106-1 like you referenced. This will provide the attachment point from your vehicle to a tow bar. For a tow bar I would recommend you get a RoadMaster Sterling All Terrain Tow Bar # RM-576. This tow bar comes with quick-disconnects, safety cables and lighting wiring. The next thing you will need is lighting. I attached an FAQ article on how to pick out the best lighting solution based on your needs. And finally, most states...
view full answer...

3 Bike Trunk Rack Recommendation for a 2013 Kia Rio 5 Door Hatchback
The trunk mounted bike rack that I would recommend for your 2013 Kia Rio 5 door hatchback is the Thule OutWay Bike Rack part # TH56BV. This rack has been tested on your vehicle by Thule and they have determined that it is strong enough to carry 3 bikes with it. What makes this rack far superior to the others is the attachment system. It uses 2 retractable coated steel cables to attach to the vehicle rather than 6 nylon straps like other racks. This makes installation quick and easy and...
view full answer...

What Winch do You Recommend for My 20-Foot Car Trailer for Loading Cars?
For hauling cars with your 20-foot aluminum car trailer for loading cars up to 4,500 pounds, I recommend the Bulldog Winch Standard Series Off-Road Winch - 8,000 lbs # BDW10041. Not only has a rated line pull of 8,000 pounds (5,333 pounds for vehicle recovery), it also includes 100 feet of cable. This length will easily allow you to attach the winch in a strategic location in the trailer for pulling the vehicles.
view full answer...

Class I Hitch Recommendation for 2012 Kia Rio 5-Door Hatchback
The Draw-Tite trailer hitch # 24883 is a confirmed fit for your 2012 Kia Rio. If you are planning on doing some towing use the following parts to complete your towing set up: Ball mount # 3593 Pin and clip # PC2 1-7/8 inch ball # 19256 2 inch ball # 19258 Trailer wiring # HM11143964 For install details and some product demonstration videos, click the provided links.
view full answer...