bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Hyundai Palisade


  • Dimensions Of Center Mounting Hole On Trailer Reflector RE35AB
  • The center mounting hole of the Trailer Reflector, Round 2-3/16" Diameter, Screw Mount # RE35AB you were looking at measures 3/16". The screw to mount the reflector to your trailer is not included but you can find a screw at your local hardware store.
    view full answer...

  • Recommended Roof Rack for a 2023 Hyundai Palisade w/ Flush Side Rails
  • To add some crossbars to your 2023 Hyundai Palisade, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y79AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent...
    view full answer...

  • Ground Clearance of the etrailer Hitch # e95ZR on a 2022 Hyundai Palisade
  • Absoulutely! From the ground to the very bottom of the receiver tube of the etrailer Hitch - 2" # e95ZR, that measurement is 11-1/2" high when installed on a 2022 Hyundai Palisade. This is the tallest ground clearance we offer for a hitch on your vehicle. I went ahead and attached a diagram that shows this measurement installed on a 2022 Palisade for your convenience.
    view full answer...

  • Recommended 7-Way Connector for a 2023 Hyundai Palisade
  • To install a 7-Way harness on your 2023 Hyundai Palisade without the tow package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C43FV. This custom-fit T-connector plugs into your Hyundai's wiring harness, which is located behind the tail lights. This will provide you with a 4-flat connector. The second harness you will need is the Universal Installation...
    view full answer...

  • Most Factory Looking Roof Rack for a 2024 Hyundai Palisade w/out Roof Rails
  • Yes, there is a roof rack for your 2024 Hyundai Palisade that won't overhang the mounting legs. It is the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06138
    view full answer...

  • Most Factory Looking Roof Rack for a 2024 Hyundai Palisade w/ Roof Rails
  • Yes, there is a roof rack for your 2024 Hyundai Palisade that won't overhang the mounting legs. These mount directly to your flush mount rails and won't extend past them. It is the roof rack by Yakima which includes the following parts: Yakima SightLine FX Roof Rack for Flush Side Rails - JetStream Aero Crossbars - Black - Qty 2 item # Y73UV SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y79AR
    view full answer...

  • Receiver Height of the Stealth Hitches Hidden Rack Receiver on a 2020 Hyundai Palisade
  • The base receiver that comes with the Stealth Hitches Hidden Rack Receiver, part # 391HYUNPALIS19, has a height to the top of the receiver hitch from the ground of 13-1/2". This being a 2" receiver, the height from the ground to the bottom of the inside receiver is 11-1/2" (13.5 - 2 = 11.5). I've linked to a video installation of this receiver on a 2020 Hyundai Palisade that shows this measurement and more. The part that you referenced, # 391HYUNPALIS19T, is the same hitch/receiver but...
    view full answer...

  • Parts Needed To Add Surge Brakes To A 2019 Stehl To Dolly
  • To add surge brakes to your 2019 Stehl Tow Dolly you'll need to know the bearing size and bolt pattern of the brake flange. Most likely you have a 4 bolt pattern brake flange which would mean you likely have a 3,500lb axle but we would still want to be sure. The easiest way to determine which bearings are used on your trailer axle is to take the idler hub off and check for the numbers stamped into the bearings. If the bearing numbers cannot be read, the next best solution is to find the...
    view full answer...

  • Recommended Hitch for a 2024 Hyundai Palisade
  • To add a hitch to your 2024 Hyundai Palisade, I recommend the etrailer item # e95ZR. This hitch is custom fit and bolts to your Hyundai with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight. If you are planning on towing you will also need a wiring harness item # C43FV and a ball mount kit item # C45534. I have linked a couple of installation videos below for these parts so you can see how to get them...
    view full answer...

  • What is Inner Diameter of Mooring Collar # 36933020
  • The inner diameter of the Mooring Collar part # 36933020 is 1-3/4 inches.
    view full answer...

  • Overall Width of etrailer Hitch e95ZR for 2023 Hyundai Palisade
  • I checked with the manufacturer and the overall width of the etrailer hitch part # e95ZR that you referenced is 48.70 inches.
    view full answer...

  • Why Does the Stealth Hitch for a 2020 Hyundai Palisade Have a 7,500 Lb Towing Capacity
  • The Stealth Hitches Hidden Trailer Hitch Receiver part # 391HYUNPALIS19T is a great option for a 2020 Hyundai Palisade. It has been tested and can withstand 7,500 lbs of gross trailer weight and 600 lbs of tongue weight. That said, trailer hitches are tested separately of the vehicle and are usually rated higher than what the vehicle is rated for. The lower of the two ratings is the correct capacity to abide by.
    view full answer...

  • Will a 75 lb 2-Bike Carrier Work for a 50 lb E-Bike?
  • There are several great options for bike racks to transport your e-bike, but the Thule Camber 2 Bike Rack # TH9058 has a total weight capacity of 75 lbs. Although this appears to be enough to carry your 50 lb e-bike, bike racks are actually rated per bike, so the Thule amber can only support two bikes up to 37.5 lbs each. This is usually because that is the limit for the individual parts of the bike rack, such as the cradle, not the limit for the bike rack as a whole. To transport your...
    view full answer...

  • Capacities of etrailer e95ZR Hitch on a 2021 Hyundai Palisade
  • For the etrailer Class III hitch that you'd looked at, part # e95ZR the capacities are 500 lbs tongue weight/5000 lbs towing or 750 lbs of tongue weight and 6000 lbs towing if used with weight distribution. This being said, you'll be limited to the 500 lb tongue weight capacity that's stated in the owner's manual. Using a weight distribution hitch can raise the tongue weight capacity of the hitch, but you still would need to abide by the manufacturer's specified towing capacity.
    view full answer...

  • Recommended Bike Rack w/ Ramp for a Aventon Level 2 E-bike and a Carbon Frame Bike
  • The best bike rack for your Aventon Level 2 E-Bike is going to be the Yakima OnRamp Bike Rack item # Y36FR. This bike rack will also work with your carbon frame bike. This 2-bike carrier comes with a ramp for easy loading. The Aventon's fat tires will work with the ramp but you will need a set of the Fat Tire Straps for Yakima OnRamp Bike Rack item # Y23FR to accommodate your 4" tires. The Yakima OnRamp has a 66 lbs per bike capacity. You can secure your Aventon bike in place by the seat...
    view full answer...

  • Will Class III Hitch on 2022 Hyundai Palisade Have Capacity to Tow 21 Foot Pontoon Barge
  • As long as the trailer/barge has a weight that comes in under the 5000 lb towing capacity of the etrailer brand # e95ZR hitch (which is also the capacity of the vehicle) and has a tongue weight less than 750 lbs, the hitch would work well for you. In addition to the hitch, you'll also need a trailer wiring harness like # CU94FR for a 4 pole or # C68JR for a 7-way. You'll also need a ball mount like # D-28 along with a # PC3 hitch pin and a trailer ball. For a trailer ball, use # 19260...
    view full answer...

  • Recommended Roof Rack for a 2024 Hyundai Palisade w/out Rails
  • We do have a set up that will attach to your 2024 Hyundai Palisade even though you do not have roof rails. This roof rack has a 165 lbs capacity and it does not extend past the mounting legs. It is the roof rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06145 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
    view full answer...

  • Recommended Stealth Hitch and Towing Kit for a 2023 Hyundai Palisade
  • To tow with the Stealth Hitches Hidden Rack Receiver item # 391HYUNPALIS19 you will need the Towing Kit w/ Ball Mount and Trailer Wiring item # 391CONVPT5L. This kit has the required ball mount and 7-way connector. The Stealth Hitches item # 391HYUNPALIS19 is confirmed to fit your 2023 Hyundai Palisade. It is custom fit and bolts to your Hyundai with included hardware. I have linked an installation video below. Uhaul trailers typically have surge brakes and require a 4-flat connector....
    view full answer...

  • How to Add a 7-Way Connector to a 2023 Hyundai Palisade
  • I have a solution for you but there isn't a custom fit 7-way wiring harness available for your 2023 Hyundai Palisade. You will also need to install a 4-way wiring harness if you do not already have one. I have listed the parts you will need below: 4-Way Wiring Harness - Curt Powered Tail Light Converter item # C59236 7-Way Wiring Harness - Universal Installation Kit for Trailer Brake Controller item # ETBC7 I have linked a couple of installation videos below so you can see how to get...
    view full answer...

  • Four Bike Carrier with 140 Pound Capacity or Greater
  • For a 4 Bike rack with over 140 lb capacity, I recommend the Swagman Quad 2+2 2-Bike and 4-Bike Platform Rack - 2" Hitches - Black # S64FR. This bike rack is rated for up to 45 lbs per bike and 180 lbs total capacity. The Hollywood Racks Destination 4 Bike Platform Rack - 2" Hitches - Frame Mount # HR4000 is rated for 140 lbs total and 35 lbs per bike. Both of these options include a hitch lock to secure the rack, but the Swagman # S64FR also includes the lock to secure the bikes to...
    view full answer...