For your 2004 Volkswagen Jetta I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24748 since you can only get a 1-1/4" class I receiver on your Jetta. Draw-Tite recommend using their Ball Mount # 3593 with this receiver on your Jetta.
A 1-7/8" Ball # 19256 or 2" Ball # 19258 will be needed to connect to your car dolly.
The Hopkins Tail Light Converter Kit # HM48925 will give you a 4-way flat trailer connection to control the lights on your tow dolly. view full answer...
There are only Class I trailer hitches available for the 2006 VW Jetta, see link. I recommend the Curt # C11474. The recommended ball mount is # 3593. For a 1-7/8 inch ball use # 19256. For a 2 inch ball use # 19258.
This hitch has a 200 pound tongue weight capacity and 2,000 pound gross trailer weight capacity. Be sure to check the vehicle owners manual to determine the towing capacity of the vehicle.
For trailer wiring, use # 118667. I have included a link to the wiring and hitch instructions... view full answer...
The available 1-1/4-inch Class I hitch options for your 2019 Jetta include the Curt round tube hitch # C11540 and the Draw-Tite model # 24978. The Curt offers easier installation but its cross tube will be visible under the bumper cover. The Draw-Tite hitch installation requires removal of the entire bumper fascia and the bumper itself but gives you a much more discrete appearance once installed. The linked photo shows the Draw-Tite hitch.
Both hitches include all of the required mounting... view full answer...
For a hitch for the 2017 Volkswagen Jetta I checked directly with Draw-Tite and Curt, our two primary hitch suppliers, to see if they have recently confirmed hitch applications for your Jetta.
Draw-Tite has confirmed that their 1-1/4-inch Class I hitch # 24926 is a confirmed fit on the gas-engine 4-door Jetta sedan so long as it is not the TDI or Hybrid version. The hitch comes with all required mounting hardware; the written instructions and an install video are linked for you.
This... view full answer...
For your 2017 Volkswagen Jetta I was able to confirm the fit of the Curt hitch part # C11474 on your 2017 Volkswagen Jetta GLI which has the different rear lower fascia like you mentioned. view full answer...
We offer a Konig Self-Tensioning Low-Profile Snow Chain that is compatible with your 225/45-17 tires, part # TH00023095. These chains have a self-tensioning feature that will tighten and center the chains as you drive off.
Before purchasing or using snow chains on your vehicle, be sure to consult your owner's manual or VW and abide by any advice given regarding chain usage.
I have linked you to a Tire Chain FAQ article that you might find helpful. view full answer...
SeaSucker does offer the Komodo part # 298-BK1910-BK which is a fit for your 2016 Volkswagen Jetta but the Falcon is only for truck bed. The SeaSucker is an amazing rack but, I realize that's quite a large price difference so you might instead like the Thule OutWay # TH45JV. The OutWay which is an extremely high quality bike rack that fits your vehicle and costs less than the SeaSucker.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may... view full answer...
We do indeed offer hitch installation hardware kits separately from the hitches themselves. Hitch hardware should NEVER be re-used so we offer complete replacement hardware kits for all of the hitches we sell.
Simply enter the item RHK into our search box and then enter the hitch part number and select the manufacturer from the drop-down menu.
I have linked two helpful articles concerning hitch installation. view full answer...
I spoke with my contact at the manufacturer and yes, the Curt Trailer Hitch Receiver Class I - 1-1/4, part # C11474, will fit a 2010 Volkswagen Jetta.
Some items you may need to complete your towing setup are.
Wiring # 118667
Ball mount # 3593
Ball # 19256 or # 19258 view full answer...
While many vehicles will have base plates and other components available, only some trim levels are able to be safely flat towed. The OEM is final word on what conditions are needed and what trim levels can be safely towed. We always recommend that you review your vehicle specific owners manual for this information as the OEM is the authority on if a vehicle they manufactured can be safely towed and how.
If you can tow your particular vehicle, you'll need base plates, safety cables,... view full answer...
Go To Results