The Roadmaster Direct-Connect Base Plate Kit # RM-524438-5 has a shipping weight of 47 lbs (including the removable arms) so the actually weight will be about 44 lbs. Please note that this kit only fits non-ST models of the 2017 Ford Fiesta without EcoBoost.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these components just let me... view full answer...
The Channel Tongue Trailer Coupler - 1-7/8" Ball # CT-2001-Z has bolt spacing measuring at 2-1/4 inches, but the Channel Tongue Trailer Coupler - 2" Ball # CT-3001-Z is larger at 3-1/16 inches, so it will not be a direct bolt on replacement, unfortunately.
With that being said, drilling another mounting hole in the tongue of your trailer will be less expensive than the alternative. Which would be buying a ball mount with a 1-7/8" ball so you can use it with the # CT-2001-Z. I will say... view full answer...
The Camco Quick-Connect to Quick-Connect Propane Hose # CAM57280 is 3 feet long. It will connect to any built-in Quick-Connect propane connection, including your Aussie grill. view full answer...
The dimensions you are looking are for on the Better Bath RV Shower Pan, # LC209490 is 4" from the edge to center of the drain hole and the width being 24" the drain hole is off center, 11" from the upper edge and 13" from the lower. Please note the attached drawing graphic. view full answer...
I went out to the warehouse to measure the Roadmaster Breakaway Harness # RM-650900 for you. It has an overall length of 126 inches (10-1/2 feet), tip to tip. It is designed for use with the Even Brake Braking System # RM-9400. view full answer...
The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached... view full answer...
The Curt Trailer Hitch Receiver # C11067 weighs just at 30 lbs and has a Gross Trailer Weight (GTW) of 1,500 lbs with a Tongue Weight (TW) of 150 lbs. It will easily be able to carry 85 lbs of bikes and bike rack. A trailer hitch does not play into Tongue Weight (TW) so you only need to note the 85 lbs that you already calculated.
Please note that the Curt Class I trailer hitches, like the part #C11067 are only intended with accesories that are compatible with Class I receivers. If your... view full answer...
No the Curt hitch part # C11067 that you referenced cannot support 190 lbs of bike rack and bikes as it has a 150 lb tongue weight capacity. It is the only hitch that we have available for your fiesta as of October 2023. Additionally, since the # C11067 is a class I hitch, you are limited to carrying only 2 bikes on the hitch. Your Fiesta is just not up to the task. view full answer...
Dexter Trailer Axle # T20BTR-EZ-7258 has a shipping weight 22-lbs. Its actual rated weight-carrying capacity is 2200-lbs. It could be used with leaf springs such as # e84SR, a pair of which is rated for 2000-lbs. view full answer...
When using a 1-1/4 inch to 2 inch inch hitch adapter you end up cutting the tongue weight of the hitch by 50 percent so the hitch # C11067 would have a capacity in this setup of 75 lbs. view full answer...
I measured Curt trailer hitch # 14090 for you. From the top of the mounting flanges to the top of the cross tube is 2-1/16 inches. The cross tube itself is 2-1/2 inches square. This hitch was designed for 1996 to 2018 Chevy Express and GMC Savana cargo and passenger vans. view full answer...
As you are using the etrailer Classic Base Plate Kit # e98968 on your 2015 Ford Fiesta you will want to use our Adapter for Reese Tow Champ or Valley Industries Tow Bar to etrailer Classic Base Plates # e98980 to ensure proper fitment in the baseplate.
This Adapter # e98980 has an opening of 2-1/8" between the ears with 1-1/8" from the pin hole center to the back of the adapter. The pin hole fits a 1/2" pin. I have included an image to ensure you can see the measurement points. view full answer...
Go To Results