I recommend pairing the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676 with the Roadmaster Direct-Connect Base Plate Kit # RM77GR for your 2023 Ford Escape Hybrid.
The best part about this tow bar are the LED lights. It might seem kind of weird, but those lights help others see that there is a connection between your motorhome and the towed vehicle so it doesn't look like someone it tailgating you while you're heading down the road.
For a complete flat towing... view full answer...
We don't offer a 1-1/4 inch receiver for your Escape, but we do have a Class III hitch with the 2 inch receiver from Draw-Tite, part # DR47FR. The hitch is compatible with all models of the 2020 Ford Escape, so it'll fit your Titanium Hybrid perfectly. If your bike rack is only compatible with 1-1/4 inch hitches, an adapter sleeve, part # HT02 is available.
Unfortunately, the # CU56FR Curt hitch you mentioned isn't compatible with Titanium or Hybrid models, so it wouldn't work for you.
If... view full answer...
When it comes to installing a baseplate on your 2022 Ford Escape The Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM39FR will be your best option because you can still use your Demco Towbar using The Roadmaster Tow Bar Adapter # RM-032. We do not have any local dealers. You will have to purchase directly from our website.
Using the adapter # RM-032 will attach to your Demco Towbar and will attached directly to The Roadmaster Baseplate # RM39FR.
The baseplate has a simple... view full answer...
For a complete roof rack on your 2011 Ford Escape with a naked roof there's a few parts you need.
Part # RRVA126B-2 includes the Rhino-Rack 2500 Series 49 inch crossbars.
Part # RRRLKVA is the leg kit for the crossbars to mount to.
Part # DK099 includes vehicle specifc Black Custom DK Clamps and Pads that fit the legs to your Escape.
This setup will have a weight capacity of 220 lbs. Check your owner's manual to see what is listed as the roof capacity of your vehicle and go with the... view full answer...
We do offer a Replacement Hardware Kit # RHK. Its a great option for Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese trailer hitch receivers. Please specify your manufacturer and hitch number when placing the order. view full answer...
Yes, the Universal Wiring Kit # ETBC7 and the Tekonsha Prodigy P3 # 90195 will also fit your 2011 Ford Escape. If you already have a 4-Way then you won't need anything else, however if you don't have a 4-Way then you will need part # 118251 if you have the factory tow package or part # 118551 if you don't have the factory tow package.
Attached is a sample installation video of the ETBC7 kit being installed on a 2011 Escape for you to reference. The brake controller being installed is the... view full answer...
Since you already have a 4-way on your 2012 Ford Escape the only thing you will need to upgrade your 4-way to a 7-way is the # ETBC7L. This kit comes with the adapter, wiring, and everything else you will need. This does not have the brake output wire, only the 12V power wire for the wireless brake controller like you described. If you think you might end up with a brake controller in the cab of your vehicle then I would go ahead and install the # ETBC7 instead.
For a brake controller,... view full answer...
When it comes to installing a trailer hitch on your 2011 Ford Escape V6 The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C13651 will work. I recommend looking into your vehicle's manual to find out the proper towing capacity for your vehicle. Per my sources your vehicle can tow up to 3,290 pounds.
The Curt Hitch has a gloss black powder coat finish that offers superior rust resistance, and has a simple bolt on installation. Depending on if you're towing a trailer I... view full answer...
Some models of the 2022 Ford Escape are capable of being flat towed.
Per the owner's manual:
• Gas powered FWD models can be trailered or Dolly towed using a tow dolly like the Demco # DM9713045 Kar
Kaddy SS. They cannot be flat towed.
• Gas powered AWD models can't be flat or dolly towed, only trailered.
• Hybrid and PHEV models can be flat towed with all 4 wheels on the ground, follow the specific instructions in
the owner's manual.
If your Escape can be flat towed, you'll... view full answer...
You can convert your Escape's 4-pole trailer wiring to a 7-way that includes a 12V power feed to help maintain your trailer-mounted battery. You will need part # 37185.
This item simply plugs in to your existing 4-pole. All you'll need then do is connect the ground wire and run 10-gauge wire # 10-1-1 from the battery + post through a circuit breaker # PK54540 and back to the 7-way where it will connect to the black wire on # 37185.
A wiring kit like # HM51020 includes the ring terminals... view full answer...
I have a solution for you, but the Curt # 13368 is not the hitch you're looking for since it's designed to fit on the Ford F-150. Instead you're looking for the Curt # C13186 which is a confirmed fit on the 2018 Ford Escape SE and will provide you with a 2" receiver. The Curt hitches have a much more durable powder coating than the other hitches on the market, so it's built to withstand the rigors of the road much better and will help keep rust and corrosion away.
If you're going to be... view full answer...
There are specific directions about flat towing your 2020 Ford Escape in your owner's manual; you will want to go to page 282, which is where I found them in the online manual. I strongly recommend verifying them in your copy of the manual. The directions state:
• Place your vehicle in Neutral Tow mode with the following steps:
• Switch your vehicle on in accessory mode
• Press the menu button on the controls on the steering wheel
• Select Settings
• Select Neutral Tow
• Follow the instructions... view full answer...
When installing a trailer wiring harness on your 2013 Ford Escape The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56335 is confirmed to fit your vehicle.
The harness plugs into the vehicle's wiring harness which is located behind the driver's-side and passenger's side tail lights. You will also have to run the hot lead up to the car battery.
I attached an installation video link below. view full answer...
As long as your Escape Titanium Hybrid isn't a PHEV model, we do have a hitch fit and a trailer wiring harness for you.
I'd recommend the Curt Class III hitch, part # C23FR. For a wiring harness fit, I'd recommend the Tekonsha # TE54FR. For a ball mount, use # D-28 along with a # PC3 hitch pin. For a trailer ball, use # 40038 for a 1-7/8 inch or # 63845 for a 2 inch ball. view full answer...
The Mounting Bracket # tr20046 has measurement of 1-3/4 inches from center to center on the mounting holes. Self tapping screws are included. For a no drill option The Short Bracket # 18140 or Long Bracket # 18136 need to be attach attached to the hitch and then attach the connector mount to the no-drill bracket.
I attached a review video link below. view full answer...
Draw-Tite Class III hitch # 75758 does not include a hitch pin but the Swagman XC-2 hitch-mount bike rack # S64650 does include a threaded pin and clip with anti-rattle mechanism.
This can be replaced, if you like, with Swagman's anti-rattle lock assembly # S64029 which provides both the anti-rattle function and locks the rack to your hitch. Or, if you prefer to lock both the rack and your bikes with one single lock, then instead you might prefer their Anti-Rattle Hitch Lock and Cable... view full answer...
I have a solution for you, however, my contact at Rhino-Rack confirmed that the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375 is not compatible with your 2020 Ford Escape. It looks like you have a naked/bare roof, in which case you will want to use Rhino-Rack # RR86TB. This kit comes with everything necessary for installation and is going to be your best option for your vehicle with the naked roof and no factory rails of any kind. This setup has a weight capacity of 165lbs and comes... view full answer...
To mount your Sears X-Cargo to your Ford Escape, you're just going to need the Replacement Hardware Kit for Searsbox Cargo Box # TH05603. view full answer...
I contacted the vendor regarding a switch for the Round LED Strobe Light - Recessed or Surface Mount - 16 Flash Patterns - White LEDs # 3378892401. They recommend using Buyers Products Pre-Wired Switch with Momentary Button # 3376391215. This switch will have 3 wires; red goes to 12v positive, black goes to 12v negative, and yellow goes to flash pattern circuit of your light setup. view full answer...
We can help you with a roof rack for your 2015 Ford Escape that will allow you to install two j-style kayak carriers.
On the linked page you can click on the roof configuration you have on your Escape, either a bare roof with no fixtures whatsoever, or a roof with raised side rails that run front-to-back. Once you click on your roof type you'll then see roof rack options to fit.
For a bare roof a good cost-effective option is the Rhino-Rack 2500-series aero bar rack made of parts # RRVA137B-2,... view full answer...
Go To Results