Expert Answers about Chevrolet Camaro

• Will the Thule T2 Pro XTR 2 1-1/4 Inch Fit the Curt Hitch # C11222 on a 2015 Chevy Camaro?
• I have a great alternative for you. Unfortunately, since the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11222 installs so that the hitch opening recedes away from the bumper, you will need to have a bike rack with a shank length of at least 8-1/2 inches from the center of the hitch pinhole to the closest part of the rack in order to clear the bumper. The Thule T2 PRO XTR # TH23JV measures only 5 inches to the closest part of the rack when folded. With that being said,...
  view full answer...


• Which Trailer Hitch Receiver And Bike Rack Will Clear The Rear Bumper On A 2011 Chevrolet Camaro?
• The Draw-Tite Sportframe Trailer Hitch Receiver # 24850 measures about 9" from the hitch pin hole to the rear of the bumper. The Swagman XTC2 Bike Rack for 2 Bikes # S64670 measures about 8" from the hitch pin hole to the nearest wheel hoop as you can see in the photo I attached. The means that the bike rack will likely interfere with the rear bumper and the only way around that is to use a hitch adapter such as CR Brophy Hitch Extender for 1-1/4" Hitch Receivers - 5-3/4" Long # hes6. This...
  view full answer...


• Is Drilling Required to Install Curt Class I Hitch C11117 on 2001 Chevy Camaro Convertible
• To install the Curt light-duty Class I hitch # C11117 on your 2001 Chevy Camaro (so long as it is NOT the dual exhaust or dual-exhaust-cutout versions) some drilling will be required. The linked instructions detail the process and also list the tools you'll need. All required hardware is included with the hitch. A helpful article on hitch installation is linked for you too. This hitch fits your Camaro convertible so long as it is NOT have the ground effects package. I confirmed with my...
  view full answer...


• Availability of Trailer Hitch that Fits 1995 Chevy Camaro Z28
• Does your Camaro have two exhaust pipes or a single exhaust pipe? We only have one hitch that fits your vehicle with the Curt # C11117 but this cannot fit versions of your 1995 Chevy Camaro that have dual exhaust. This hitch would work great to carry a bike rack like the Hollywood Racks # HR200Z.
  view full answer...


• Fit of Curt C11117 Class I Hitch on 1995 Camaro Z28
• The Curt # C11117 Class I hitch fits 1995 single exhaust Chevy Camaro models. It won't fit models with twin tailpipes next to each other or models with two cutouts in the bumper for the exhaust to pass through.
  view full answer...


• Are Stabilizer Straps Required for Curt # C11900 Hitch When Used With Cargo Carrier?
• Curt requires the use of # 18050 stabilizing straps on the hitch # C11900 for non-supported loads like bike racks or cargo carriers like the Curt # C18145 cargo carrier. I really like how well hidden this hitch is. If it were me, I would add the etrailer # 22281 rubber hitch cover. I looked into the installation instructions, and among the typical tools required, there were a few special tools that you should consider getting to make the install go easier and faster. You may want the...
  view full answer...


• Trailer Wiring Harness for a 2015 Chevy Camaro and Trailer with LED Lights
• Yes, you can use Curt trailer wiring harness # C56197 on your 2015 Chevy Camaro with incandescent lights and trailer with LED lights. I have included a link to the installation instructions for you.
  view full answer...


• Will the Curt Hitch Fit a 2012 Chevy Camaro 2SS
• I do show the Curt Trailer Hitch Receiver part # C11222 as a fit for a 2012 Chevy Camaro 2SS. I checked with the manufacturer and they do show fit on SS models although they don't break it down into 1SS and 2SS. There are no structural differences between the two so there should be no fit issues.
  view full answer...


• Is Airaid Throttle Body Spacer a Fit for 2014 Chevrolet Camaro with 6.2L Engine
• The Airaid PowerAid Custom Throttle Body Spacer, part # AR200-630-1, which you references, fits both the 2015 Chevy Camaro with 3.6L V6 and 6.2L V8 engines. The blades of this throttle body booster cause air entering the engine to tumble and spin. This ensures a highly atomized fuel-air mixture in the combustion chamber, which boosts fuel efficiency. I have included the installation instructions for part # AR200-630-1 for you to check out.
  view full answer...


• What is the Smallest Tire for a 7 Inch Wide Wheel
• According to my research, the 1968 Camaro Rally Wheels are 15" diameter x 7" wide. If this is correct then the smallest tire size that is safe to run would be a 195 like you mentioned. I am not saying that the 175 tire would not seat/seal but it is not recommended. There are companies available that will either wider or shorten the width of a wheel if you are dead set on using the 175/65-14 tires for what I assume is a front runner setup. In regards to clearance on your 1987 Monte Carlo,...
  view full answer...


• Trailer Hitch Receiver for a 2018 Chevrolet Camaro ZL1
• Yes, the Curt Trailer Hitch Receiver part # C11900 is a confirmed fit for your 2018 Chevrolet Camaro ZL1. I called my contact at Curt to confirm this. This hitch has a class I rating with a 1-1/4" receiver tube opening.
  view full answer...


• Does Curt Trailer Hitch Fit 2013 Chevy Camaro Convertible
• The Curt Trailer Hitch # C11222 can be installed on your 2013 Chevy Camaro convertible, just so long as the Camaro does not have the Ground Effects Package, which could be the case with a Z71 so you will want to make sure. This is a Class I hitch with a 1-1/4 inch receiver and is a bolt-on installation so you can install it without any drilling into your Camaro's frame.
  view full answer...


• Hitch for 2019 Chevrolet Camaro ZL1
• Curt has confirmed the fit of their Class I hitch # C11900 on the 2019 Chevy Camaro ZL1. The Curt hitch bolts on using the included hardware pack and provides a 200-lb tongue weight rating. Installation instructions are linked for you. If you will be using a compatible bike rack like the Kuat Transfer # KU74FR or a cargo carrier like the Curt # C18110 you'll want to use Curt Support Strap # 18050 to support and steady such items. You can use a compatible carrier up to the hitch's 200-lb...
  view full answer...


• Trailer Hitch Receiver For 2011 Chevy Camaro Convertible
• There is indeed a trailer hitch receiver that fits your 2011 Chevy Camaro convertible, so long as you don't have the Ground Effects package; it is the following part number: - Convertible: Curt Trailer Hitch Receiver # C11222
  view full answer...


• Trailer Hitch Receiver to Fit a 2018 Chevrolet Camaro
• We only have one trailer hitch receiver that fits the 2018 Chevrolet Camaro it is a Class I hitch; the Curt # C11900. I looked up the owner's manual for the Camaro and it has no rating for Chevy about towing and it does not recommend being used for towing at all. In this case there's normally not a hitch rated any higher than a Class I designed the vehicle.
  view full answer...


• Will Curt Class I Trailer Hitch Receiver Fit 2016 Chevrolet Camaro SS
• The Curt Class I Receiver Hitch # C11900 that you referenced is confirmed to fit all models of the 2016 Chevrolet Camaro, so it will work well for your Camaro SS to carry a Class I compatible bike rack. I checked the instructions to see if any bumper fascia trimming is required for this hitch on your vehicle. The instructions indicated that the center, inside, lower edge of the fascia may need to be trimmed if necessary, and that the hitch is intentionally designed to be close to the...
  view full answer...


• Army Hitch Cover for a 1-1/4 Inch Trailer Hitch
• We have hitch cover # AUT2-ARMY-C for a 1-1/4 inch hitch. The only other option is to use an adapter such as # HTAD to go from a 1-1/4 inch hitch to a 2 inch. But this will also make it stick out further.
  view full answer...


• Fit of Draw-Tite Class I Hitch on 2014 Chevy Camaro
• As long as the 2014 Camaro you are interested in does not have the factory ground effects package, the # 24850 hitch from your 2010 will indeed fit a 2014 model. However, keep in mind that the hardware is not meant to be reused. To obtain replacement hardware, click on the provided link for part # RHK. On the product page you are taken to, there will be a box asking for the hitch part number and a drop down menu for the hitch manufacturer. Type in # 24850 for the hitch item number and Draw-Tite...
  view full answer...


• Is Drilling Required to Install Trailer Hitch on 1991 Chevy Camaro
• The Curt Trailer Hitch # C11117 will require drilling to install on a 1991 Chevy Camaro. There are two holes that need to be drilled with a 9/16" drill bit in order to secure the hitch. Please keep in mind that this hitch does NOT fit models with twin tailpipes or single exhaust models that have the bumper with two cutouts for the exhaust. I have added a link to the installation instructions for you to check out as well.
  view full answer...


• Curt Hitch Recommendation for a 2001 Chevy Camaro
• The Curt Trailer Hitch # 11117 that you referenced should work well on your 2001 Chevy Camaro. Having dual exhaust will not cause a problem is this hitch is confirmed to fit other F-bodies like yours that come standard with dual exhaust. You will need to be sure you do not exceed the towing capacities of your vehicle and this hitch with your trailer. Your owners manual will have the towing capacities listed for your vehicle. When determining the overall towing capacity of a setup you...
  view full answer...