Expert Answers about Volkswagen

• Available Guide-On Heights for Boat Trailer
• They sure do. They're available in several different lengths shorter than the 75 inch high # CE27636 guide-ons that you'd looked at. Here are the un-lighted versions: • 65 inches tall, part # CE27637 • 60 inches tall, part # CE27640 • 40 inches tall, part # CE27620 If you'd prefer lighted guide-ons, those are available as well in certain heights: • 60 inches tall, part # CE27760 • 40 inches tall, part # CE27740
  view full answer...


• Recommended Plug-In Trailer Wiring Harness for 2004 Mercury Sable Wagon
• We do offer a 4-pole trailer wiring harness with simple plug-in installation for your 2004 Mercury Sable wagon. You can use Curt T-Connector harness # C55343. This harness provides a substantial maximum current output of 3-amps per stop/turn circuit and 5-amps for the taillight circuit. Installation instructions are linked along with two helpful articles.
  view full answer...


• Trailer Wheels/Tires in Load Range D and 5-on-4-1/2-Inch Bolt Pattern
• We do not offer any pre-mounted wheel/tire items in a 16-inch size that have a 5-on-4-1/2 bolt pattern. All 16-inch trailer wheel/tire combos are either a 6-on-5-1/2 or 8-on-6-1/2 bolt pattern. All 16-inch wheel/tires are shown on the link provided. Also, there are no 16-inch rims with this bolt pattern. 5-on-4-1/2 bolt pattern wheels and wheels/tires top out at the 15-inch size. I also included a link to all 15-inch wheel/tire items in the 5-on-4-1/2-inch bolt pattern in Load Range D,...
  view full answer...


• Availability of Trailer Tire Size ST225/75R15 With Higher Speed Rating
• I have a higher speed rated tire in the size ST225/75R15 that you referenced, but the part # AM10303 is rated for 65 mph. Instead I would recommend the part # TTWTRTM2257515D as it is rated for 81 mph. This tire has a capacity of 2,540-lb at 65 psi also. Be sure to keep it at 65 psi to ensure you get the full capacity and speed rating. I attached a review video for you to check out as well.
  view full answer...


• Does the Ram Scissor Stabilizer Jack # TJSC-24 Come With Mounting Hardware
• The Ram Scissor Stabilizer Jack # TJSC-24 does not come with attachment hardware. I recommend going with the largest bolts that will fit, grade 5 or higher, if you will be bolting the jacks on. They can also be welded on, which will be the strongest option. Welding should be performed by a qualified professional.
  view full answer...


• Availability of Trailer Taillight Kit With Submersible Taillights
• The lamps included with the # TL29BK Trailer Taillight Wiring Kit aren't submersible, but we offer similar kits that are. If you want to stick to incandescent lamps, use part # TL5RK. Or, for an LED kit, use part # TLL9RK. I personally prefer LED lamps. You'll never need to replace a bulb, the lamps are brighter and they draw only a fraction of what incandescent lamps do. I installed a similar kit on my PWC trailer about 5 years ago, and they still work great.
  view full answer...


• 2-Inch Hitch Locks Available Keyed Alike
• Universal hitch locks like the Lets Go Aero Anti-Rattle Trailer Hitch Receiver Lock # 63232 and the other similar lock shown on the linked page are not offered keyed-alike. We do offer 2-inch hitch locks that can be ordered keyed alike but these are not anti-rattle types. These are shown on the other link. For example, etrailer # e98880 fits 2-inch hitches and can be ordered keyed-alike in any quantity you need. So too can their stainless steel lock # e98882. Simply select the Keyed Alike...
  view full answer...


• Is DeeZee DZ8180SB 8.4 Cubic Foot Truck Bed Toolbox Available In Other Colors
• The DeeZee # DZ8170SB 8.4 cubic foot truck bed toolbox you referred to is also available in white as part # DZ8170S. If you wanted unpainted aluminum diamond plate, go with part # DZ8170 or for black aluminum diamond plate, use part # DZ8170B.
  view full answer...


• Do you Have The Wiring Kit # TL16RK with a 5-Way Connector Rather Than a 4-Way Flat?
• We do have the 25 Ft 5-Way Trailer Wiring Harness # A25W5B you can use in place of the 25' 4-way harness included with the Optronics Trailer Light Kit # TL16RK. Currently all of our light kits only include wiring for a 4-way.
  view full answer...


• Galvanized 8x7 Inch, 4 Bolt Wheel and 215/60-8 Load Range D Trailer Tire
• You can get a load range D tire, 215/60-8, it is # AM1HP28. You will just need to get a wheel separately if needed, # AM20023, for a galvanized 4 bolt. A load range E is not available in this size. The D range is rated for 1,165 pounds at 70 psi. The manufacturer where we get our tires and wheels does not send this combination to us already mounted and we cannot do it in our warehouse. However, any local tire shop can mount the tire for you for a nominal fee. Current pricing for the above...
  view full answer...


• Rear Exit Exhaust Pipes for a 1999 Doge Durango
• The exhaust systems that we have for the 1999 Doge Durango, see link, follow the same path as the factory exhaust which does happen to be rear exit with a single pipe. To make any additional modifications you would need to take the vehicle to a muffler shop or a place that does customization on vehicles. If you are looking just for exhaust tips then we have several options available. I have included a link to the exhaust tip main page for you.
  view full answer...


• Trailer Hubs to Accommodate Tubeless Tires on a Trailer with 8 x 14.5 Donut Rims
• In order to recommend replacement hub and drum assemblies for your trailer, we will need to know the trailer axle weight ratings for each axle, the bolt pattern on the new wheels you intend to use, the type of braking system used on your trailer (electric, electric-over-hydraulic or hydraulic) and the inner/outer bearing numbers. The bearing numbers will enable us to identify a hub that is compatible with your spindle. We recommend replacing all components on an axle at the same time,...
  view full answer...


• Availability of Complete Bearing Kit for Dexter Axle on 2008 Jayco 5th Wheel Camper
• We do offer complete trailer bearing kits for a variety of combinations of inner and outer bearings, races and seals, but we do not happen to offer one that includes each of the components you require. You will then need to order the components as individual parts. Your outer bearing is part # 02475; outer race is part # 02420, inner bearing is part # 25580; inner race is part # 25520; double-lip 10-36 grease seal (a pair) is part # RG06-070. If you do not already have one, you might...
  view full answer...


• Availability of Replacement Socket for Bargman 90-Degree Fifth Wheel Wiring Harness # 51-97-410
• Unfortunately, Bargman does not offer the socket portion of the # 50-97-410 separately as a replacement part. The entire harness would need to be replaced. As a less-expensive option, you could use part # PK11898 and splice it into the existing wiring harness after the damaged plug has been cut away.
  view full answer...


• Does WeatherTech Offer a Rear Cargo Area Floor Mat for 2010 Chrysler Town and Country
• WeatherTech does offer a rear cargo area floor mat that matches their 2nd and 3rd Row Rear Auto Floor Mats for the 2010 Town and Country. The part is offered in three colors: gray (part # WT42265); tan (part # WT41265); and black (part # WT40265). These custom-fit cargo area floor mats are made to precisely fit your specific vehicle; they grip the floor of the vehicle to stay in place and they have a textured surface to hold your cargo securely. A raised lip edge helps to keep any spills...
  view full answer...


• Availability of Trailer Hitch fit for 2013 Volkswagen Beetle TDI Convertible
• According to Curt, their # C11354 class I trailer hitch is indeed a fit for the 2013 VW Beetle Convertible Turbo Diesel. If you'll be using the hitch as a mounting point for a bike rack or cargo carrying tray, Curt's warranty stipulates that a stabilizing strap like part # 18050 needs to be used for all non-trailer loads. If you'll be using the hitch for light-duty towing, you'll also need the following: Trailer wiring harness, part # C56380 Ball mount, part # C45521 1-7/8 inch trailer...
  view full answer...


• Custom Fit Trailer Hitch Receiver and 4-Way Wiring Harness For a 2022 Genesis GV70
• The Draw-Tite Max-Frame Trailer Hitch Receiver # DT63GR is currently the only aftermarket receiver I can find for your 2022 Genesis GV70. We also have the Vehicle Wiring Harness # C59236 if you are planning on towing a trailer. This will give you a 4-way flat connector which is most commonly used on small trailers. It will also allow you to use Auxiliary Lights # C53201 if you are going to use a hitch mounted accessory like a bike rack which will impair the view of your tail lights.
  view full answer...


• Can I Carry a Bike Rack On My RV While Flat Towing a Vehicle Behind The Motorhome?
• The Roadmaster Dual Hitch Receiver Adapter # RM-077-8 will allow you to carry a bike rack and flat tow your 2018 Ford Explorer behind your 2013 Georgetown RV motorhome. You will be able to insert your tow bar in the lower receiver and a Bike Rack # HLY64FR in the upper receiver. The adapter is rated for up to 400lbs of tongue weight but it will reduce your receiver capacity by 50%. So if you have a receiver rated for 500lbs of tongue weight it will be only 250lbs. The adapter weighing 27lbs...
  view full answer...


• Is the Empire Faucets Hybrid RV Tub Faucet and Shower Head Pressure Balanced
• No, the Empire Faucets Hybrid RV Tub Faucet and Shower Head # EM87FR is not a pressure balanced option. If you are wanting a set-up that is pressure balanced you would need to go with an option like the Empire Faucets RV Tub Faucet and Shower Head # EM55HR.
  view full answer...


• Custom Fifth Wheel Installation Kit for 1999 Ford F350 DRW
• We have what you need and it will work with both hitches. You will not need to change the above bed rails for your 1999 Ford F-350 Super Duty if you install ISR (Industry Standard Rails) which pretty much the only currently available option. Any hitch made in recent years by a major brand will be ISR except for those made specifically for the respective OEM puck systems. ISR is named so because they are the most popular pattern so are now referred to as the "industry standard." Industry...
  view full answer...