The Swagman Titan 2-Bike Rack for 1-1/4" and 2" Hitches part # S63400 can use the Locking Anti-Rattle, Threaded Hitch Pin part # S64029. view full answer...
With the Rhino-Rack ROC25 Roof Rack # RR46XR installed on your 2016 Mazda CX-3 you are looking at a crossbar spread of 26 inches (distance between front and rear crossbars on center). The Stallion Aluminum Roof Mounted Cargo Basket # 288-09200 referenced in your question will work with a crossbar spread of 17-3/4 inches to 24-3/4 inches, so it's not going to be a good fit on your vehicle.
For an aluminum basket that will fit the Rhino-Rack roof rack on your Mazda CX-3, I recommend taking... view full answer...
The Draw Tite hitch part # 24933 is a Class I hitch with a 1-1/4 inch opening. Thule makes bike racks that fit this size and Class.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three. Check out the review video I attached for more info.
If you plan on carrying any women's or alternative... view full answer...
We have a very similar roof rack to the Rola you mentioned that is confirmed as a fit for the factory fixed mounting points on the roof of your 2019 Mazda CX-3 but the Rola kit does not fit your vehicle.
Instead the Thule roof rack part numbers # TH711400, # TH710501, and # TH145136 which is an aero bar roof rack. view full answer...
There is not a 2 inch hitch receiver available for your 2018 Mazda CX-3, so to make your Kuat Bike Rack compatible, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24933 view full answer...
Although both the Curt # C56300 and the Tekonsha # 118718 are both fits for your vehicle, I'd personally choose the Tekonsha harness, as we've found that they tend to be a bit more reliable over time.
If you haven't yet decided on a hitch, I'd recommend the US made Curt # C11418. For a ball mount, Curt recommends the # C45521. For a trailer ball, use # 19256 for a 1-7/8 inch ball or # 19258 for a 2 inch.
I've linked to install instructions and an install video for the hitch. view full answer...
Sounds like you have a Class II bike rack by Yakima and would like to install it in the Draw Tite hitch part # 24933 which is a confirmed fit for the 2016 Mazda CX-3. Nearly all Yakima 1-1/4 inch hitches are Class II only so there's no way I can recommend a hitch that would work with your bike rack since all of the hitches for your vehicle are Class I.
Only solution would be to go with a bike rack that is Class I compatible.
The most popular bike rack we carry that has been confirmed... view full answer...
Yes the Curt hitch part # C11418 that you referenced is a fit for a 2019 Mazda CX-3 hatchback like have as it fits all models. We had the chance to install it on a 2019 hatch as well which you can see in the attached install video. view full answer...
The Curt, # C11418 is confirmed to fit your 2021-21 CX-3 as well as the Draw-Tite Sportframe, # 24933. Each of these hitches are a 1-1/4" x 1-1/4" Class I hitch with a 200 lb. tongue weight rating and a 2,000 lb. trailer weight rating. Both are capable of light duty towing and a good choice for a bike rack or cargo carrier. With most all things being equal in ratings and performance I suggest the Curt, # C11418 option due to customer feedback having a better finish. If the powder coating... view full answer...
The best trailer hitch receiver for your 2020 Chevy Blazer is the Curt Trailer Hitch Receiver # C13418.
The reason the Curt is the best is because it has a concealed crosstube which ensures only the receiver is showing, and is a much easier installation than the Draw-Tite model, which requires the removal of your Blazer's bumper beam; the Curt hitch does not. I have added a link to a video install for you to check out as well of the Curt Trailer Hitch Receiver # C13418.
Additionally,... view full answer...
Yes, the Draw Tite hitch # 24933 does come with a set of printed instructions that have a list of all of the tools you'll need to complete the job. I attached a link to this page to see the instructions and also attached a picture from them that shows the tool list. view full answer...
Actually Curt stopped requiring the stabilizer straps with bike racks and other non-supported hitch accessories with their hitches like the # C11418 that fits your 2019 Mazda CX-3.
It was an extra precaution they took back in the day but recently found it's not needed. view full answer...
The best bike rack style is a hitch mounted option so for your 2019 Mazda CX-3 you'll need to install a hitch first like the Draw Tite part # 24933 which is best option as it doesn't require a stabilizer strap like the equivalent Curt does for your vehicle.
Now the easiest to use bike racks are platform racks as they are much easier to load then trying to fit the frame of your bike over the arms of a hanging rack. Typically the big drawback to platform racks is the weight but we have... view full answer...
The # SA4025F Saris SuperClamp won't have any issues carrying an eBike with fenders. With full fenders on front and rear wheels being commonplaceon eBikes, the placement of the SuperClamp hooks just need to be adjusted accordingly.
As long as you can get the front wheel clamped down really well you can just do the best you can with the rear hook, you'll be good to go. The front fender on a bike stops right where you would want the hook to be so ideal placement is not hard to get for the... view full answer...
Thule limits the weight capacity of any one bike to 35 lbs on their DoubleTrack Pro, part # TH92BJ. The DoubleTrack Pro is indeed compatible with bikes that have fenders, but the weight capacity won't allow this to be an option for you.
I do have another less expensive option for you. Take a look at the Hollywood Racks Trail Rider, part # HR200Z. This rack handles bikes weighing up to 45 lbs, which is perfect for your bike. Hollywood Racks makes an excellent product, and and the Trail... view full answer...
Yes, we checked with Yakima and the HangOut 2 part # Y02637 that you referenced is a confirmed fit for your 2016 Mazda CX-3.
Outer/Lower support frame rests on the trunk lip, hatch lid, or rear door below emblem
Place the lower strap hooks at the bottom edge of the trunk, hatch lid, or rear door
Side strap hooks to back side edge of trunk, hatch, or rear door below tail lights
Requires use of Yakima's Glass Hatch Hook accessory in place of the upper strap hooks. One set of the Glass... view full answer...
Yes, if you wanted to use the 49 inch long Rhino Rack crossbars # RRVA126B-2 instead with the feet kit part # RRRLKVA and the fit kit part # DK384 on your 2018 Mazda CX-3 you certainly could. view full answer...
The Curt Trailer Hitch Receiver # C11418 is confirmed to fit all models of the 2021 Mazda CX-3. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a Class 1, 1-1/4" hitch receiver for using hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
When using hitch mounted accessories with this hitch you will want to make sure it is rated for use with a Class 1, 1-1/4" hitch. Something like the Thule Apex XT 2 Bike Rack # TH9024XT... view full answer...
Curt is the only manufacturer that requires the use of stabilization strap # 18050. No other manufacturers require it though you can still use it if you want to. The idea is that the strap reduces some of the stress on the hitch. Uhaul hitches are just rebranded hitches from other hitch manufacturers so it is a Draw-Tite or a Curt too.
Any accessory you put in a hitch is going to move. This is because the shank of the accessory has to be a little smaller than the receiver opening so it... view full answer...
Go To Results