I tried looking for your Hidden Hitch model 78214, and I was not able to pull anything up.
However, whenever you use the Replacement Hardware Kit for Trailer Hitches # RHK you will receive all the original hardware that came with the hitch.
To order new set of hardware, you'll just need to enter your hitches part number in the "Hitch Item Number" box, and from the drop down, select the manufacturer of the hitch. view full answer...
The CE Smith Spare Tire Carrier for Trailers # CE22007Z-11050-2 uses 7/16" lug nuts.
This carrier will work with 4-lug and 5-lug wheels that are up to 15 inches; it is made from steel and is zinc-plated which means it is going to be strong against corrosion.
I have added a link to a video review as well of the CE Smith Spare Tire Carrier for Trailers # CE22007Z-11050-2. view full answer...
Yes, the Draw-Tite Trailer Hitch Receiver # 36650 does include the necessary hardware for mounting to your 2021 Volkswagen Tiguan without the factory weld nuts.
Contents
1-Receiver
4-Carriage bolt 7/16’’-14 x 1.75, GR5
4-Spacer .875 x 2.00 x .109
4-Conical washer 7/16’’
4-Hex nut 7/16’’ -14 GR2
4-Pull wire 7/16’’ view full answer...
The Global Link Ultra E Pro Electronic Lock for Travel Trailer, part # 295-000183, comes with a C123 lithium battery.
These batteries (which you can get replacements for very easily) have a lifecycle of 3 to 5 years since lithium lasts much longer. There is a sensor on the unit that will flash red to alert you when the battery is getting low.
I've linked to a video review of this lock for your consideration. view full answer...
Yes, the Curt Trailer Hitch Receiver # C11529 comes with the fishwire needed to install this on your 2018 Hyundai Kona. I have attached a picture of the included hardware for you to reference.
If you let me know what you will be using this trailer hitch for I can make additional recommendations as necessary. view full answer...
The SuperSprings Mounting Kit for OEM Leaf Springs Above the Axle # MXKT is designed to be used with a SuperSpring Custom Suspension like the # SSA28 and allows you to mount the springs above the axles instead of below them with the rest of the leaf spring pack. These springs are designed for a truck and not a trailer, so it's really not going to be a solution that would work for you.
If you can tell us more about your trailer, like the axle capacity and how many axles there are, we can... view full answer...
I am not quite sure why the Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers part # K71-358-00 doesn't come with new bushing for the front hangers. That said, you could add these easily with the part # D014-077-00. view full answer...
The Curt 1-1/4 inch Trailer Hitch Receiver # C11276 that you referenced is a confirmed fit for your 2014 Toyota Prius Plug-in Hybrid and comes with a 1/2 diameter hitch pin that can be found with part # F-4.
Keep in mind that you will need to use a Support Strap # 18050 for any non-trailer loads like a bike rack or cargo carrier when using this hitch per the Curt Warranty.
I have attached a video of this hitch being installed on a 2014 Prius for you to reference. view full answer...
The main difference between the Rhino-Rack # Y02-490B-NT and the JA9943 is the # Y02-490B-NT provides 59 inch crossbars, the # RRRLT600 feet and the track fit kit for Thule ( # RRT-FK1) and Yakima ( # RRT-FK3) style tracks. The JA9943 provides 54 inch crossbars, the same feet and the track fit kit for factory tracks.
If you were wanting the JA9943, you could order the parts separately:
• Rhino-Rack 54 inch Vortex Aero Cossbars, part # RRVA137B-2
• Quick Mount Roof Rack Leg # RRRLT600
•... view full answer...
The Go Power # 34282184 380 watt Solar Elite Charging System does indeed include the battery temperature sensor, as shown in the provided photo.
If you click the provided link, you can see a typical installation. view full answer...
Yes, the Replacement or Additional Handrail for Stromberg Carlson Econo Porch Trailer Steps part # SP5110-HR does come with the hardware that you will need to attach it to the Econo Porch Trailer Step with Handrail and Landing part # EHS-102-R. I spoke with my contact at Stromberg Carlson to confirm this for you as well. view full answer...
The Replacement Vacuum Pump for Dometic VacuFlush RV Toilet - 12V # DOM33FR comes with everything that is pictured in the photos on the product page. I do believe you're referring to one of the connections for the pump that is threaded (shown in attached photo), which is included. view full answer...
No. The Classic Accessories RV Wheel Covers # CA80086 come in a set of two, so they'll have the covers for an entire axle. If you've got a single axle trailer, you'll only need one set of these. For a tandem axle trailer, you'd need 2 of these. view full answer...
The Kat's Heaters Oil/Transmission Pan Heating Pad # KH26150 comes with a removable 6 foot long cord. You can upgrade to a 10 foot long cord with part # KH28416. view full answer...
Actually, the DC inflator is built into the AirBedz # 341030 mattress as shown in the video I've linked for you. The inflator is pulled out and recharged as shown at the 1:10 minute mark in the video. view full answer...
The Scrubblade Heavy Duty Windshield Wiper Blade # SC99FR that fits your 2017 Ford F-350 Super Duty comes in a quantity of one.
So in order to get a set you simply need to change the quantity to "2" in on the product page you when order.
I have added a link to a video review for you to check out as well of the Scrubblade Heavy Duty Windshield Wiper Blade # SC99FR. view full answer...
The Airlift 1000 Rear Air Helper Springs Kit # AL60818 that you referenced is indeed a complete kit with two air springs hardware, tubing, and Schrader valves for manual inflation. This kit fits the Ram 1500 series.
If you want to add automated inflation/deflation from the comfort of your cab you can add the Load Controller II Compressor System # AL25592 whichi is shown in the linked video. view full answer...
To start, you'll want to know what the capacity of your axle is, which lets us know what size the hub and drum on your trailer is; however, since you've got 14" wheels, you've most likely got 3500-lbs axles with 10" hub and drums. In order to determine the correct wheel bearings that fit your hub, we do recommend pulling the hubs to confirm the bearings that you've currently got to ensure you get the correct parts; however, most 3500-lbs hubs use the # L44649 outer bearing and # L68149... view full answer...
The Plunger and Nylon Socket Door Holder part # DH605 does not come with installation hardware but we do have screws that will work for this, the part # 1131832. view full answer...